JUKI HZL F600 introduction and operation

My great movie.

[@morarivera9580]

Hope this is OK. It’s for my future reference. I keep coming back to this video: 1:45 GREEN light - ready to sew or is sewing.RED not ready to sew. 2:01 REVERSE button to sew backwards. THREAD TRIMMING - using SCISSOR button - or STEP on heel side of presser foot. 2:41 and 3:57 NEEDLE UP DOWN button. 2:47 SPEED lever. 3:54 STITCH length and width adjusting dials + or - 4:35 Free motion sewing and attaching a button - lower feed dog. 6:00 THREAD tension 6:15 PRESSER FOOT adjustment - fabric thickness. 6:47 and 9:47 Replace NEEDLE - regular household ndl - flat part facing back - THREADING ndl. 7:43 and 9:13 Refilling BOBBIN and threading BOBBIN. 11:41 SEWING THICK fabric 12:43 LOCK STITCH and thread trimming 14:05 NEEDLE POSITION - straight stitch 14:45 OVERCASTING stitches (there are 3) - serger like 15:27 BUTTONHOLES 18:35 DECORATIVE stitches, i.e. Select by numbers button, press the > button, to decorative icon, OK, input 02 for the pattern, presser foot I. 19:15 SCALLOP stitch, Select the 🖤 button, OK, 24, continuous stitch button (3rd below OK button), presser foot I. To elongate: press 5th button below OK, select the size with >, OK 20:17 LETTERS, i.e. Select the 🖤 button, then > to select alpha or Nos., OK, use numbered-alpha keys to “write” (same as old cells’ keys, i.e. press 5 button once for J, then, continue pressing this key until u get lower case letter, >, 8 button twice for U), presser foot I. To correct letters, press the C (clear) key - next to the < key. Delete all by pressing-holding the C key. 21:54 DARNING, press the 123 button, 22, presser foot I. 22:50 SAVE/CALL - to save pattern combinations 24 :O1 PATCHWORK QUILT, piecing, pattern no. 2, presser foot A 24:52 APPLIQUÉ, pattern no. 5, 6 presser foot I or O. 27:42 QUILTING, walking foot, or presser foot Q (for free motion) 31:24 RANDOM STITCH PATTERNS (could be used for crazy quilting.

[@YvetteWilliams-vv2yv]

I love you Juki!!😮

[@janicedinse1]

Who talks like that? Was it a computer? Kilting - that is a new one. Looks like a wonderful machine that I sure would love to own.

[@morarivera9580]

In some languages (as in Spanish) the “u” after a “q” is silent. Actually, I find this voice very comforting. Better than having a human talking about their personal issues during the first minutes of the presentation. This is straight to the point. Great!

[@dianahill4476]

Can you do a video on how to correct the tension for the under stitch?

[@Pollyanna012]

Had this machine a few years and use often. But having difficulty inserting the needle today - what am I doing differently ?

[@lisesheeba4156]

The price would be helpful. Or we have to search on Ebay or Amazon

[@marionbartley214]

Can this machine use the juki thread holder accessory can it be mounted on the back of the machine.

[@gwenglover7424]

How do you control stop/start of machine when free motion quilting...releasing one hand to press green button isn't feasible

[@mariadolorespoladura1616]

Gracias por este video , aunque no entiendo el idioma , me sirvio el visualizarlo .

[@gaelynhumphrey2851]

Suddenly my machine will not pick up its bobbin thread. Can you help me figure this out?

[@natureenthusiast660]

Check whether the bobbin case is damaged or not

[@like2makethings]

Is there a way to have the machine stop after a decorative stitch segment? I don't like having partial segments because I can't see when the segment ends and starts again.

[@Cyrilmc222004]

Thank you so much 😊

[@danielleburette8805]

Français

[@randyc8171]

That spool of thread uses a vertical spool pin. Using a horizontal spool pin twists the thread as it leaves the spool. Juki should know better !

[@yingzh2948]

how to select the other kind of button hole? it very hard to choose in this machine

[@thangamanandakumar3866]

How much it cost?

[@28belong]

Dear Juki people...can you also upload instruction for Juki HZL-T550. please help

[@busybee1952]

With the box feed, why would it still be necessary to use the walking foot attachment?

[@upwardartsempire1374]

hello

[@dip166]

Because the box feed works from below and the walking foot from the above... it’s good when you’re sewing quilts or other multilayered fabrics that may otherwise not move together under the foot.

[@mariadolorespoladura1616]

Es una pasada de maquina .

[@EllenStan]

127 Schuster Club

[@bobydayderrick459]

8724 Ewald Lights

[@marianalietorgonzalez9944]

En español por favor

[@laradolores]

Por Favor traducir a Español