July's Song Upgraded Hobby Greenhouse

[@jenh849]

Thank you so much for the video, I bought one from Temu and I don't even know what brand it is. I think I can return it for free. Looks to be too much of a nightmare, thank you again for your imput. :)

[@jamess3718]

i have the exact green house...clear silicone all panels, and for a base i build a wooden deck base for it and bolted and drilled the frame to the wood deck base

[@frostylonewolf1700]

i need to make modifications to keep the panels in during storms or strong winds

[@stephaniebattle8676]

Hi this was a very interesting video I'm building mine as I text so I'm thinking silicone my panels in to make them stay come winter 💪

[@ozarkshomesteadandfarm]

Tara had a great comment right below👇

[@tarastavelingpaints4811]

And I learned to put metal flashing tape on the open ends of the polycarbonate to add support and weather proofing

[@ozarkshomesteadandfarm]

Great idea!!! Thanks for sharing

[@tarastavelingpaints4811]

@@ozarkshomesteadandfarm I was excited to learn this so I had to pass it on to you!

[@stephaniebattle8676]

@@tarastavelingpaints4811 great idea thku for sharing never heard of metal flashing tape though ..

[@sidneybolam5655]

Hey! Can you explain how the gutters are attached? We can't figure it out.

[@ozarkshomesteadandfarm]

There is a channel on the inside of the gutter, the bolts on the upper walls slide through that channel so you have to loosen those nuts and bolts slide the gutter from one end, all the way down to the other, making sure that those bolts are in the channel and then re-tighten

[@raygordon1822]

I just bought a bigger one and have the same problems ,as for panel rattle on the last page on the instruction it says to use silicon sealant on all panel joints!, that;s another $100 !!bucks!!

[@ozarkshomesteadandfarm]

Lol

[@tarastavelingpaints4811]

What about silicone the panels after installing

[@ozarkshomesteadandfarm]

That might work, I was also thinking about small strips of felt to push into the gaps

[@tarastavelingpaints4811]

@@ozarkshomesteadandfarm I’m getting the 8x10 for Christmas and really want to set it up before the snow flies, wondering if I should hire someone to help

[@ozarkshomesteadandfarm]

@@tarastavelingpaints4811 it definitely requires help, but I would use friend or family, I would not pay a professional.

[@ozarkshomesteadandfarm]

I also bought a Canopia by palram…… the directions are 1000% better

[@ozarkshomesteadandfarm]

If I might be able to help just email me [e-mail]

[@johncalvey96]

Oh yeah the window slides in thru the end of the ridge beam!!! That was the only problem I had ...the panels get sheet metal self tapers down bottom mine are still there !!!

[@ozarkshomesteadandfarm]

Nice to hear from someone who has one!

[@ozarkshomesteadandfarm]

I just built another house, stay tuned for update and comparison

[@dorothywitt7966]

What if the dog eats your directions can you get another book? I don't know how to contact this company

[@johncalvey96]

As silly as it is , doing the base last and setting the greenhouse on top of the base frame is definitely the best way to do it

[@afvaquiz]

How did you do the vent??? I need help

[@ozarkshomesteadandfarm]

You have to assemble the vent first, and then it slides in from the outside, like the front of the greenhouse, the very top on the ventures that half round piece, it slides into a groove, and you just slide it down to the position that you want and then it stays there

[@ozarkshomesteadandfarm]

I haven’t watched that video for a while but I’m pretty sure I’m covered that but I could be wrong

[@afvaquiz]

@@ozarkshomesteadandfarm thank you so much, the instructions were so confusing:/