Junkyard AWD V6 TURBO POWER!! SikeClone is BACK in the STREETS!

We Built my AWD Turbo v6 S10 SikeClone to be better than a real legendary GMC Syclone for a fraction of the cost! We are getting this sucker dialed in and prepared to race the Iconic 1991 truck heads up! We've got a fresh junkyard engine in there and Tony Angelo and the Stay Tuned crew try to get the boost up, and the times down with a ton of fuel and transmission tuning! Does it suck!? Does it rip?!
--------------------------------------------------------------
BUY US A PIZZA HERE!: www.paypal.com...
Join this channel to get access to perks:
/ @staytunedta
WE APPRECIATE YA!
Send Me Stuff!! - PO Box 68, Spring City PA, 19475
Instagram: / tangelo96
----------------------------------------------------------------
STAY TUNED CREW:
Barb: / mbarbalinardo
Mike Kunz: / mikeslim
Stone: / stoneharleysheetz
Russo: / thakingofhearts
Crosley: / rycros
Tunes by the Subtastics!
----------------------------------------------------------------
MY PARTNERS:
Holley: tag.gs/Tony_An...
Speedway Motors: www.speedwaymo...
Use Code STAYTUNED10 for 10% off your order at Speedway!
#speedwaymotors
Falken Tire: www.falkentire...
Summit Racing: www.summitraci...
Bolts and Nuts: boltsandnuts.com/
Wirecare: www.wirecare.com/
Miller Welders: Click the link to Grab Our Synchrowave 210! www.millerweld...
FREE SHIPPING on all orders when code "staytunedta96" is used on either PypesExhaust.com
or ColdCaseRadiators.com!Join this channel to get access to perks:
/ @staytunedta

[@imalec]

That top hat was fly af. Thank you for helping out the boys!

[@leftventricle3]

Cam absolutely flexed on all of us. I wish I could be as cool as him when I grow up.

[@jake1021]

Kid has ALL the confidence

[@thezfunk]

The next Dr. Demento

[@FunForAll58008]

Not everyone can pull off a top hat. He nailed it. Rock on dude

[@Lane-jq3ed]

100% cool as shit👍🏻

[@Robrt32]

That Abe Lincoln hat was on point. Dude was stylin and profiling.

[@zero2Steve]

WOOOOOOO!!!!!!!

[@blainehale]

I 100% appreciate the kid with the top hat. Do YOUR thing, man!

[@StayTunedTA]

Rockin it!

[@pokerdotjearsy]

legend

[@SLOCLMBR]

It was clean and sharp too, I wonder what other greats have stood under it..

[@NH1969GOAT]

Love this show! No fake drama, no editing out all the fails along the way, just real hot-rodding :--)

[@StayTunedTA]

No drama here, and if there is, you’ll see it!

[@corystansbury]

​@@StayTunedTA Other than the constant threat of losing the shop

[@CarMad97ci]

@@StayTunedTAif you have any drama, you might lose the shop

[@3DTreats]

No payoff at the end is sad but just blowing it up for clicks is even more sad. I'm always disappointed when KZbinrs ruin something just to get some content out. I hope all us armchair mechanics understand that sometimes you just don't get it figured out by the deadline but blowing it up again isn't a diagnostic procedure.

[@mr.ogpaint]

Most of the drama is caused by carburetors on engines that should be fuel injected

[@kaber6162]

So glad you guys could use the Steering wheel! It looks great on there.

[@fossilfish786]

Kudos to ya

[@JohnDoe-en9ch]

Could have at least given a shout out.

[@brandongreene3213]

Dude straight up doing his own thing. Keep crushing it kid!

[@sporty196071]

One of my customers has a Typhoon with 20,000 miles. He ordered it new with the stickers delete. It looks like a plain black S-10 Blazer with fat tires. I've been trying to buy it but no sale. He's 73 years old and he drives the hell out of it.

[@mrk8521]

Man, I passed on a really nice typhoon like 10yrs ago for 10 grand. Thanks for reminding me how much I regret not buying it. Haha

[@lpatierno84]

I passed on trading a srt8 300 for a typhoon. Ended up with a Lightning but I really should've held out for the typhoon

[@NONo443]

Now you can build one!

[@BucksSuperStereoWorld]

​@@lpatierno84What year Lightning? Back when I was 18 or 19 I had a 1992 Acura Integra that I built the engine with forged internals and I built a junkyard turbo kit for it and had it professionally tuned. It made 452 whp at 25 psi and we would have race nights at our local food drive in joint where we would race down Rt 51 in Beaver, PA. My buddy had a 600 whp 95 Mustang with a Kenne Bell supercharged 347 that would stand up on the rear wheels. Him and I were always the fastest cars there, but we both kept getting our asses handed to us by a 2002 Lightning with a bunch of mods (including a five speed manual swap). He hated me because I was the import sellout, so he never told me what mods he had. I have wanted one of those ever since. I had a black and red 1993 Lightning with a 351W and a gray cloth interior. I miss that truck...

[@cfields8507]

Theres a typhoon sitting at a spot close to me. Its real, and its rough. But man.

[@darrengriffin9339]

It wasn’t a Typhoon but I passed on a MCSS Aerocoupe for like $2500

[@MatthewJensen-d9u]

I have been noticing a recurring trend in ALL of my favorite automotive shows, JUNK parts are killing us. It ain’t just JUNK car parts, this trend is killing HVAC industry also. Keep up the awesome content!!!

[@StayTunedTA]

Thanks for watching!

[@79huddy]

​@@StayTunedTA bet that set screw is in the sonic cleaner

[@jeremyhanna3852]

Crib death is a real thing killing heavy equipment also

[@larrydonscott5372]

Beer was my poison so I hadda slow down.

[@ThomasEllis]

Best Damn Car Show on the Internet bringing the heat with the SikeClone!

[@StayTunedTA]

Let’s goooo, thanks for watching!

[@christopherleander9068]

The Clownclone. Glad you pay for this.....

[@PX125E]

That Top hat is killer. And what an awesome gesture.

[@mattv4690]

Buddy was wearing a top hat, of course it's Cameron and not Cam. What a cool kid.

[@Medium-pimpin]

Can we all appreciate how clean the shop is getting?! It’s a beautiful thing

[@StayTunedTA]

Stone always keeping the place minty!!

[@maynard-1776]

Old-timer Pro tip to keep your charge pipe from coming off. Before you put it on spray a little hairspray on the inside of the tube and on the intake

[@rustyjeep2469]

always used hairspray to install bmx / mountain bike grips too. helps them slide on easy and then it dries and they stay in place better. 👍

[@paulmryglod4802]

We did this on mx grips to lock em on the bars. Good tip

[@miniblad33]

It works great until you have to pull them off. If you ever have to pull them off, good luck lol. The better option is to use the correct style of clamp, the ones that have a sprinig-loaded bolt.

[@maynard-1776]

@miniblad33 nah just twist back and forth a couple times and it comes right off but yes you do want to use V bands

[@miniblad33]

@@maynard-1776 idk i must overapply it then. every time i've used this trick it's a major pain in the ass to get them off.

[@setherdmann9307]

Cameron is a Real Gentleman. Thank You for You time bringing the Cameo body kit. Very Kind of You.

[@rurph]

My favorite build on KZbin! Just really wish y’all would ditch that carb for a sniper

[@yuntypoch]

What they need is a intake that is healthy for the power band which long tube runners from a c4 vette its called tpi first intake I’m getting it for mines as it become available again in a 5.7 vortec they made over 500 hp NA and I didn’t even get the torque numbers it’s worth a shot

[@rurph]

@ they have a v6 not a v8

[@JohnDoe-en9ch]

@@yuntypoch Dafuq are you talking about?

[@DJtyphoid]

We're just going to ignore the kid in the top hat? 😂

[@StayTunedTA]

I mean, we're gonna be cool right?!

[@scatman2397]

Kid is dripped out 😂 I was looking for this comment. Go Cam. Stay weird little dude

[@br549200]

What kid in a top hat?😊

[@geoffreygriffiths1385]

Probably found it in a mine shaft. Stay Rad Cam!

[@jeffleary1598]

Feed em pizza and send em

[@hzawada]

5:27 Daaammmnnn, I was not ready for that!!!! A++ What a cool donation to the build! Cars bringing people together....

[@SLOCLMBR]

That feller's top hat was premium! I wonder how old it is..

[@kaylabentley-rd1qd]

I have syclone cladding molds. My parts are professionally made very nice pieces. Still working on getting that stuff available to everyone.

[@xxSgtXioXxx291]

Um wut

[@GrandPitoVic]

YOU guys are SOOOOOOO close!!!!! Playing it safe this time. Awesome!!! I hate pulling the same engine many times. Good job.

[@StayTunedTA]

Thanks! Yeah I am over grinding rings. I want to party!

[@GrandPitoVic]

@StayTunedTA LOL yes sir!!!! I hate grinding rings but a necessity lol

[@StationroadRatrods]

@@GrandPitoVicfancy seeing you here 😁

[@GrandPitoVic]

@StationroadRatrods Yes sir!!!!!! How are you sir??!!!!! Lol. Been watching Tony since HitRod Garage.

[@RoninDosho]

Shout out to Cameron and his Dad. Awesome top hat and wow those Cameo parts. I never get tired of seeing you guys work on the SikeClone. Looking forward to the next video.

[@benjaminrandall5841]

It was cool seeing you at Wawa today Tony. Haven't seen Wayne in many years. It's been a long time since our days in Track and Field at middle school. You guys do some incredible projects. Good luck always brother. Also, if you want a free Icebear moped to mess with let me know. I have keys and it's NOT locked up. FREE BUD.

[@StayTunedTA]

Yeah man, great to see ya for a min! I don't know what an Icebear moped is but it sounds fun!

[@trailtimeszr250]

The only way this channel could get any cooler is if Stone started rocking a Top Hat at all times.

[@DouglasPatac]

LOved the fact that this wasn't a complete win...yet. This video is ,ore like real life. Glad you are taking your time with it.

[@apocolypse11]

One of the few guys that actually builds hot rods an races them with actual cars. Instead of making up numbers cough cough mopar guys.

[@bretvincent3408]

Great episode - Real life troubleshooting, wrenching and fixing issues. Dude in the Top Hat = instant legend

[@lakebearfishing4487]

This car is reminds me of the rotson, never fails to fail but worth all the pain

[@StayTunedTA]

RIGht! I love to hate/love it!

[@zero2Steve]

Wait. Didn't the Rotsun also have a 4.3?

[@michaelstarr5861]

The filter/sock on the pickup tube in the bottom of my gas tank in my 1990 was the root of all my lean-running problems

[@LegitCheckers]

Time to sit back and drink a beer and enjoy my favorite show on the tubes…

[@jasoncardoza6375]

Makes you appreciate the RND that goes into factory performance vehicles and their reliability after watching all the stuff you did to make it beat a real one.

[@ezekielstinnett6871]

This truck has been my favorite build from you guys I'd love to see the same treatment done to a safari van

[@Diddy_Do_It2037]

6:28 if Napoleon dynamite and Abraham Lincoln had a son together

[@cloucks1003]

Nice Mr. Mom reference…”220,221, what ever it takes!”

[@StayTunedTA]

Glad someone got it!

[@Ecosse57]

@@StayTunedTA saw it in the theater. yeah, i'm old.

[@BucksSuperStereoWorld]

​@@Ecosse57I'm 41 and I'm fairly certain that movie came out the year that I was born...1983. It's always been one of my favorite movies. My woobie!!! 😂😂😂

[@BucksSuperStereoWorld]

​@@StayTunedTA Teri Garr just passed away too sadly. October 29th. She was 79 and passed from complications due to MS. My ex's dad passed from the same thing, but he was only in his late 40s.

[@lilorbielilorbie2496]

cloucks 1003 My best friend from high school . Did some carpentry work on the Mr. Mom house. To get it ready for the movie. Fun fact .The Mr. Mom house is on Fraternity Row for UCLA in Brentwood, CA.

[@GenXERIC-4888]

The Top Hat Was Legend WAIT FOR IT Dary

[@DragonsFireMetalWorx]

Great to see the time you take for fans, especially fans who came that far to not only help out with a build...but drive the distance just to meet up ... that's pretty rad... The truck will beat the snot out of a production truck though...of that I have no doubt

[@Yourmission9]

I remember in the early 2000’s I had an older coworker, and she drove an old blazer (same body style as this S-10) and her husband drove an old square body. At the time I was a dumb kid and said “those cars are trash”. Man would I love to have both now

[@oscarsmith6519]

The best thing about SikeClone is that I watch and think, with my limited skills, I could build that. I cant, but you keep inspiring to break some stuff. Thanks for the show.

[@lawrenceayres9377]

I love all the cars, especially this badass truck. But Cameron's hat might be the coolest thing I've ever seen on this channel! 🤘🤘

[@montanadunulf]

As a teenager in the 90's... I have always wanted a Syclone, or a Syclone clone, this truck f*cking rocks!!!

[@anthonyiodice]

I was a teen in the 2000’s, adult now, I still want one!

[@antonmcesaro]

You guys have some interesting builds, a specialty in oddball shit nobody else is trying. I respect it. To that carburetor issue I have had the best luck with ATM carburetors. Send them your engine specs, they will build a blow through to match it. Shit comes out perfect every single time. For me anyway it's been a life saver.

[@colebreinholt1778]

4.3l Vortec be like EFI PLEASE!!! 😩

[@andydupont4786]

My favorite project

[@Swampfox12345]

Tony "Danger to Manifold" Angelo is at it again 😅

[@adrianhughes2163]

Great show! And I wanted to say, thanks for being such a good bunch, like a couple of episodes back whereby you brought a car for zip tie drags(?) fixed it, then sold it back to the original owner for the same money, after fixing it, that's very kind - kudos to you all. Incidentally for this build, is it worth getting it on EFI and mapped? As you will know, a boosted motor, especially running a lot of boost will always be vulnerable to melting a piston due to going lean at the top, so having it mapped might save you some more pain? Or at least decide a maximum boost figure and then take the carb setup and get that setup so you know its safe at max boost etc. Taking nothing away from what you've all done, it shows great ingenuity, skill and hard work. Well done!

[@oddcarsandbaddecisions]

Came here to say this! I get that properly tuned carbs are the best they're going to be at full throttle, but it would run soooooo much better everywhere else with EFI.

[@jameshall4385]

I can't believe you left us hanging to see what it looks like with the body kit on it. That is going to make that truck look bad ass

[@mattygilmore3548]

Hell yeah I love this thing. Tony there is a cyclone behind this shop about 5 miles from my house that has been sitting underneath a carport for the better part of 15+ year's. I've tried to buy it several times and left my information several times. It is a raspberry typhoon. I hope someone contacts me soon because another 10 years it's not going to be worth anything.

[@StayTunedTA]

Good luck! I hope they come around to ya.

[@rickybobbyracing9106]

Dude, you are living my dream. It's like all the modification fun of Gran Turismo, but for real. Love what you are doing!

[@aaronfoley8421]

Hell yeah. This truck is pure hooliganry and I love to see it.

[@haynes966]

just binged this entire build, can't wait to see this thing fully with that kit and finally at the drag strip.

[@blahblah4125]

Can't believe you found a body kit for that lean/mean truck. That was lucky. And same color too, wow.

[@StayTunedTA]

Yeah that body kit was a stroke of luck!

[@timothyadams2719]

Coolest thing in this video is Cameron’s top hat and that’s saying a lot because there’s a bunch of awesome happening here. Loving the build

[@DaneSteffanni-wt9fw]

We love Cameron, right!? Hes got style

[@IridiumRedTheOrigina]

Love the show, love what you guys do. Do you know what would help that get off the line REALLY well? 100hp nitrous shot. Nitrous makes everything better (still gotta tune the thing so it doesn't get fried, iffy fuel pressure on turbo motor no bueno), but it would sure launch better :)

[@Ahamilton1804]

Love the 220…221 joke around the 13:30 mark lol From a movie called Mr Mom…classic

[@darrenmilford1573]

I bet that set screw is in the ultrasonic cleaner. Top hat rocks, cant wait to see the body kit installed.

[@jjfig6166]

I was thinking the same thing, that the set screw fell out in the cleaner...

[@bryanleverett2830]

I picked up a Syclone recently and I wish it was this easy to work on lol

[@SwordCymbal79]

That lunch lady reference tho. “Sloppy Joe, sloppy sloppy Joe”!! Between the MR mom reference from the last Sikeclone installment & this, I now know more sure I could never be productive with y’all in a workplace. The banter would be worth it. I’ll stay tuned for more GenX references lol

[@roymceachin7409]

I can’t wait till you get it dialed. Always enjoy your videos. Thanks guys

[@StayTunedTA]

Thanks for watching!

[@beauvrt]

So cool to put the gentleman in his son in the video that brought you the kid that is a wicked class move my brother

[@NeverLetOff]

Hell yeah! Sikeclone check, Friday check, Stay Tuned check, time to go into the weekend HOT! LET'S GO!!!

[@StayTunedTA]

Let's GOO!!! TGIF!

[@Wartorment]

I am so ready to be off of work and watch this episode. Thanks for making Fridays even better, Tony and crew!

[@hughguilderson]

You gotta have A/C or ur' fakin' the funk. A real Syclone is a real car/truck. Stripping everything off seems lazy and rigged. And you have WINDOW CRANKS.

[@hughguilderson]

And a carb instead of EFI. Stop cheating.

[@josephlove2740]

This channel is so much fun! Thanks Tony and team

[@adamfrbs9259]

Heck ya another Friday, here we go!!!

[@gunjiweber42]

Wow, that's an awesome build. Launches like that on 3:42 gears is insane

[@slyknowledged]

Waiting on World Cup videos to drop, perfect timing!

[@stevenkirkey9796]

Never heard of the cameo but my dad was always in love with the typhoons There was one at a dealer he worked at in the 90s Incredible little truck , black on black I drooled over it many times 20 years ago We lost him in april this year Gave me my love of cars Chevy trucks and dodge cars he'd always say Love the channel boys !

[@PlumCrazyPC]

Top Hat Cam is 100% gonna be a hot rodder when he gets older.

[@zero2Steve]

The marketing is already done for social media if he just follows through

[@JimalTemus]

This truck is my all-time favorite project vehicle, taking the crown from the Roadkill Chevy Muscle Truck. So choice.

[@KimberlyCarter-fe9vh]

You are incredible, don't stop creating content!

[@StayTunedTA]

Thanks man! I'm having too much fun to stop!

[@alwayssleepy1]

Tony, that outra brother... it's humility like that that makes the rad top hat kid want to help. Keep uo the great work, guys!

[@bud215]

Hell yeah boys it's Friday!!! Go Birds

[@StayTunedTA]

Go Birds! Early Friday!

[@assaultlick2169]

Let's go Stone ! Great addition to the channel. This truck is sick

[@rachalhollier5679]

You can buy an adjustable 4/barrel linkage rod from Holley. What it does is lets you adjust how soon the rear two barrels open . That would let you adjust any lean spots rite above idle circuit. Trust wits worth the $50 they ask for it. Great video Tony!!!

[@bentboybbz]

All of the Holley carbs I've seen people messing with I've always kinda wanted to be like "uhhh hey... that's actually adjustable to a point.... and your transfer slots should never be that far open it's never going to be right..." But the only time I spoke up I got told that they have 30 something years of experience etc so I keep quiet and watch people struggle now... thank you for your time and effort!

[@workingguy-OU812]

God, I love this cheap shit fixin' and roddin'.

[@StayTunedTA]

Me too!

[@Weretarantula5]

No spin All win baby! Can't wait to watch, thanks ST!

[@kerrylewis2581]

Time for a few slices while you are waiting for parts

[@StayTunedTA]

Get in there!

[@chasestewart302]

I wish you guys would really doll this thing up. Cool build. Glad you’ve kept at it despite all the curve balls it’s thrown you along the way.

[@layzboy2545]

HellYeah boys!! SykeClone on a Friday!! This is how you start a damn weekend!!! Beer and a Slice Time!! Ready to Stay Tuned 🤘🤘🤘🤣🤣🤣🔥🔥

[@StayTunedTA]

Get those pizzas ready! Let's GO bud! This thing WILL GO!

[@layzboy2545]

@@StayTunedTAI cannot wait to see this thing Rip!!! Turbo,all-wheel drive, and light. It’s a auto cream dream🍺🍕🤘

[@robertwest3093]

I have complete faith in you guys. It’s 90 plus percent there. Now it’s going to be the little things that drive you mad.

[@GiselleOlmstead]

tunedbyai AI fixes this. AWD Turbo SikeClone ready.

[@d_rock_t]

It was a good day. New SikeClone content and my ST t-shirt showed up! Super appreciate you guys.

[@tomdavis5878]

Lets gooo! When can we see more of the aston v12?

[@StayTunedTA]

SOON! We will have an update on that thing in a week, but in 3 weeks or so we shoujld have a flywheel and clutch!

[@StevenStillsJr]

I saw the Thermo quad shirt, that’s awesome. I build and sell those on eBay. There’s only a handful of us guys that actually mess with those things. I love them.

[@chadschmele86]

That kid has gotta be from Punxsutawney

[@StayTunedTA]

Oh that hat, that checks out.

[@jiimmyboy63]

This used to be my favorite project on the channel. Now its number 2 next to your old man's Camaro. Pumped for this vid, and cant wait for more on the camaro!

[@JoePhounders]

Everyone shut up!! Woman get me a beer! Stay Tuned is on! Let's GO!!!

[@johnwillis3941]

Sick build one of my favorites. Tuning boost with carburetors can be so frustrating. You will get it dialed in sure. Keep up the good work.

[@romeoalphafoxtrot9517]

It's a work in progress. It will get there. It's getting better every time! Great work guys! Love it!

[@richardharvey8939]

Great video. Thanks to the kid and his dad for helping out

[@Oz-Rein]

Just a thought, make sure you have a full or at least half full tank of gas. As a Syclone owner, if I have less than half a tank, it'll stumble on launch as all the fuel sloshes to the back of the tank. No idea if that is your problem here but sometimes it's the little things that cause the issues. I know I forget sometimes. lol Anyway, I'm really enjoying this build series, I cannot wait to see the end results.

[@justinpakarno4346]

SEMA's in a week and he truck's not ready! Seriously cool dudes dropping those parts off.

[@StayTunedTA]

Yeah, neither of us with be in Vegas!

[@StayTunedTA]

Hell yea!

[@tonykemper8896]

That Kid rolled in with the top hat rockin like a boss!

[@OSRn77e]

When it’s backfiring like that it’s lean

[@djk9168]

Dude casually rocking the top hat, love it.

[@fr33dumb0]

By far the best automotive channel on KZbin! This is gold content boys! Keep it up!!

[@concernedviewer2641]

Appreciate yall not breaking it just to hit an arbitrary deadline. That kind of silliness is below your channel - I think a lot of your audience like the deliberate approach, even if it takes little longer than the alternative.

[@2dcutout]

Agreed, this is really important - I want ST for the content (interesting, funny, educational, inspiring), not necessarily having a perfect finished product at the end of each episode. There's definitely been a few rushed episodes where less rush to put out the perfect content would have meant less blowing up.

[@gilly110]

check in the bottom of the ultrasonic cleaner for that missing set screw, good chance it vibrated it loose.

[@georgenelson3496]

My junk was way better off idle and revved harder after I locked out the distributor and then I did the retired trick with the advance canister. Now I run an electronic set up to control timing. Locking out the distributor helped a bunch. On my old setup. Had the stumble like yours before. And she liked all the fuel at top in on mine. Made boost fast.

[@FlyinandDrivin]

Once you get it dialed, sell kits of parts to build your own. Love the show. Thanks for sharing your fun work!

[@masongiles8443]

Heck yeah the F1 weekend off to an amazing start and I get to watch an update on my favorite hotrod truck Thank you tou as always to the whole stay tuned team

[@StayTunedTA]

Thanks for watching!

[@bradsmith4417]

Shout out to the Monopoly Man for stopping by- hell yeah.