I hope everything turns out ok when you start digging more into this build. I would love to see this being brought back to life :D
@HenryTriplette4 жыл бұрын
Getting strong Wangan Midnight vibes here. X3 Good luck with your build!
@BradBuilds4 жыл бұрын
🤣 I hope to be half as cool as that
@Minebiowerz4 жыл бұрын
Ok, i have a 280z so i know about how to get parts if you need them. Craigslist, ebay, forms and facebook market place is good to start for smaller things. For body panels look at pick a parts and salvage yards because you can get both fenders and headlight buckets for 100-150$. Diffs go for like 50-60$. Dont be scared of rust, they all have them. My z probably is going to be scraped because the rust is just too much. Main structural parts of my z is compromised. The rails are basically gone. The back fender wall is gone. Check for rust in the wheel wells, rails, rear light area, water drain, battery area, floors, transmission tunnel, and fuel pump area. These areas are known to rust. GOOD LUCK!
@BradBuilds4 жыл бұрын
THANKS! all good info
@jackellis72164 жыл бұрын
I’m so pumped to keep up with this build man! Good luck!
@BradBuilds4 жыл бұрын
Thanks man! Can't wait to share more
@Godsmizfhit4 жыл бұрын
Can’t wait to see how this goes 🤔🔥
@KSKS8884 жыл бұрын
Best time to work on your Project: During social distancing at home
@chriscraft770222 жыл бұрын
THAT IS COOL.. you have the carb set up everyone drools over
@jackphoton5 ай бұрын
That was great seeing you layout parts on the floor . Your dog sees you doing it and says "Those aren't real toys." and brings you a tennis ball to show you the difference. But silly humans just don't understand. lolz.
@ElmiraMarx4 жыл бұрын
You should dig in to it, make there there is nothing majorly wrong with the body. then once you have everything it needs figured out. Do a render of your dream car and build it in reality. Either way I'm subscribing and make sure the dog is there every step of the way.
@fredericktiongkongyao56114 жыл бұрын
Good luck with your build,I am a fan of you
@BradBuilds4 жыл бұрын
Thanks!
@iselreal53263 жыл бұрын
There’s a 240z at an antique car shop and I’ve fallen in love with it, but the body has rust and holes in it. The front looks like it’s been crashed, the engine is missing and it has plants growing inside of it. It’s my dream car and I don’t care if it’s a lawn ornament at this point, but the condition is so bad. The owner of the shop is selling it for 1,800. It’s imported from Japan and still has all the writing in Japanese on top of that it’s right hand drive. Idk I know it’s a bad idea but I want it so badly lol
@julien_s4 жыл бұрын
Super project !
@conceptazhe7784 жыл бұрын
i am getting my own 260z for a restoration project soon, so that means it's time to binge watch videos about them
@jonathanmendoza43174 жыл бұрын
So excited for this build, can’t wait to see more!
@richardssk91784 жыл бұрын
Yessss i cant wait to see what will come as you build this project. Are you making weekly videos or something like that?
@BradBuilds4 жыл бұрын
Thanks! That’s what I’m hoping for!
@badblood28494 жыл бұрын
Waiting for the progress as you build the car
@asharafbinahmad27824 жыл бұрын
I hope to see you with a million of subscribers in a couple of years as you have a talent of building master pieces and make more videos that i can't wait to see them. Wish you success!
@BradBuilds4 жыл бұрын
Thank you!! Can't wait to share more videos :)
@bbossautomotive36024 жыл бұрын
Dude that's awesome! I love the 240
@BradBuilds4 жыл бұрын
It’s been a dream car of mine since I was a kid!
@leka26523 жыл бұрын
Bro dis my dream car i love how u doing one cant wait to see the finished project 👍
@osamabinlaggin694 жыл бұрын
That is gonna need a lot of love
@mohabatkhanmalak1161 Жыл бұрын
One of my favorite cars, I did some of my apprenticeship on the 240, 260Zs back in the late 70's. Looking forward to the rebuild, what is the odometer reading - its a 1971 model, just curious.
@felicealketti15344 жыл бұрын
Hi Brad, I am thinking of following your channel. I have well running z myself but love to watch restauration videos. There is another guy publishing detailed videos of his blue 280 which helped me a lot and very informative. Would love to see something similar. Also it would be nice if you numerate your videos. That way it's easier to follow. Looking forward to be part of your progress. Best regards from Germany!
@BradBuilds4 жыл бұрын
Thanks for the suggestion! I've been adding them to my "Datsun 240z" playlist and they are in order there :) regards from California!
@simsalekna71044 жыл бұрын
I hope this continues, i want to see that baby grow!
@infeenity88644 жыл бұрын
Yoo Best of luck with the project man :D Love all the way from Pakistan , btw anyone i show your builds here goes wild at how sleek and classy the designs are thinking they are real cars , to which i dont burst their bubble :D i love your content man keep it going , may success kiss your feet every step of the way , Hardwork pays off :)
@Rishi-jj2tz4 жыл бұрын
No way pla make it midnight blue skbit fits the wangan midnight style😍😍🤩🤩🤩
@BradBuilds4 жыл бұрын
🤣❤❤
@jamesbashaw58313 жыл бұрын
"I was hoping for a rot-free body" *Laughs in 70's Datsun*
@joseaguero52254 жыл бұрын
Keep doing videos from this beauty
@DrunkshipOfLanterns4 жыл бұрын
this is gonna be bananas!
@blocstrz4 жыл бұрын
Drop a LS in it holler at CPR in Gardena/Carson CA.
@abieltaylor79144 жыл бұрын
I’m not sure if anyone else has pointed this out...and I’m sure it’s not high on your list of things to worry about...but that is a 280z hood on your car.
@ゴーシュガーキン4 жыл бұрын
Beautiful car, will to be engine swapped? If so which one
@BradBuilds4 жыл бұрын
Not sure as of right now. Need to see if the motor I have already is salvageable
@ゴーシュガーキン4 жыл бұрын
It**
@madwaleed4 жыл бұрын
I think it requires some wire harness work too..
@brianquicehuatl33864 жыл бұрын
Hyped !!
@dusantrajkovic65294 жыл бұрын
I really wont to see this build finish 💕
@garlic2354 жыл бұрын
I want to see more of them.👍 Lets do this😏
@AbdulRashid-uq8ek4 жыл бұрын
I didn’t even know u had a yt channel damn the datsuns sick
@BONESAW374 жыл бұрын
Keep these vids coming!!!
@roberto-eu3bx4 жыл бұрын
Keep up the work🦍💯
@gonzop.10203 жыл бұрын
i’m looking into getting a junkyard Datsun 240z that been sitting around my local spot for a while and i was wondering what are some major things to look for if I end up picking it up?
@Wewssmsm3 жыл бұрын
I Like it ❤️
@zachlong45404 жыл бұрын
Plz keep doing these videos. You remind me of alldayanthony lol.
@MindDezign4 жыл бұрын
The very best part is you have the design talent to do the car right. This is going to be good to watch No diff ? Subaru limited slip. Research it on hybrid Z Find parts on Facebook Datsun Z and S30 forums and classifieds. Join S30 Facebook Z clubs. Let the journey begin...design on !
@BradBuilds4 жыл бұрын
Thats sick! I've just purchased one though, so maybe down the line when I upgrade. Thanks for the insight!
@Paizroyyy4 жыл бұрын
Now make an edit of the datsun and make a bodykit for your goal 🤩👍🏼
@Minebiowerz4 жыл бұрын
Series 1?
@furkanulu544 жыл бұрын
Programs ??solid works ??
@RainyDaysDrive4 жыл бұрын
Do you have any tips for anyone starting into rendering stuff?
@BradBuilds4 жыл бұрын
Practice!! It took me weeks before I made something that didn't look like a potato