JUNKYARD RESCUED CRX 22: MXR TRACTION BAR ! (Do Recommend For The Budget!)

MAXPEEDINGRODS DISCOUNT CODE : YSTATIC
CRX/Civic Traction bar : TRB-HONCIV-8891-LC
www.maxpeeding...
/ maxpeedingrods
Wanna Send some Cool stuff????
Dana Prum
P.O BOX 21304
San Jose, Ca 95151
Follow the media!
/ efnstatic
/ staticservice
/ danaefnut
ACTION CLUTCH 15% OFF DISCOUNT CODE : STATIC
actionclutch.com/
/ actionclutch
S1 BUILT
/ s1built
www.s1built.com/
/ @s1built
REDZONERACE
www.redzonerace...
/ redzonedb8
/ redzonerace
Nomis Industries
/ nomisind
CJSWIRING
www.cjs-wiring...
/ c_zapien
STREET2TRACK
www.street2trac...
BRFITTINGS
www.brfittings....
/ brfittings
Y&S Lexan
/ y_s_lexan
BLUETOOTH Module
/ fab.tlpc

[@savethecivic96]

I’m honestly so glad that your filming again. I’m a local truck driver and I always watch your videos on my lunch breaks lol

[@ronniecason9807]

I just got my traction bar for my crx yesterday one of the radius rods the hiem joint went in easily the other one was rough so this morning when I got into work I chased the threads with a tap and it went in like butter. Can’t wait to install it and my maxpeedingrods coil overs this weekend.

[@markwarren7959]

Yo Static, Fifty year old, East coast, Honda guy here. Love your vids. With all the info you give to the community it is a shame you don't get move subs.😢 I've been watching your channel for a few years and enjoy all of them. Slapping a transmission into an EK coupe right now. Keep on truckin' sir.☺

[@arsenchikre5]

I recently purchased this traction bar myself. Awesome product, I spent another $120 on a b series front engine mount from Innovative, fits almost perfectly, just wrench your block couple inches higher. Night and day difference compare to old ebay bar. Strongly recommend.

[@jordank7685]

Could've swore I saw an h22 in the hf. That duct tape on the engine code had me laughing. Excited to see the end result

[@anthonycatalan4896]

thats what i saw too...!

[@marcozuniga8163]

Definitely looks like it, or else his using a relocating bracket for the alternator???? Hmm 🧐 🤔...it's H2b.

[@bigmanbuilds]

I saw that too! My guess is it's the h23 swap he scored from the junk yard a while back from his buddies wrecked eg

[@malice930]

I was wondering the same thing. I havent been on youtube in a while and remember this had a b16 in it. I started looking through past videos and didnt see anything talking about an h series.

[@racerx9931]

I just installed the Maxpeedingrods Coilover kit and this traction bar on my b17 89 crx this week. Still haven't driven it yet.. Need alignment. 1st impression, it's heavy. I didn't put em on a scale but, fully assembled it felt heavier than the OEM crossbar and rod assembly. I had the same issue with one rod not liking the threads too! I swapped back n forth, used cutting oil and "finessed" the threads. Final thought, Tho it's not as nice as say a $350 bar.. I'm very happy so far with what I spent on it.

[@IxTechNiK]

It's not a bad traction bar for the price definitely, but if you plan on keeping the car for a very long time id get an innovative pro series bar. My MXR started rusting in spots after 6 months and the jam nuts would come loose all the time but it worked like it needed to.

[@cruz_control3925]

That "B16a trust me" in sharpie on the block had me rolling lol!

[@victorwilks88]

Progress is better than no progress

[@3undred]

I had to go back to his videos to make sure i wasn’t tripping about the h series LOL

[@markangelo3958]

Same! 🤣

[@mathewduran2843]

Me 3 🤣

[@Yonelll_Kim]

Bro lmao

[@h2bhatch724]

Same😂😂

[@chrisrivera97cr]

Thought I was the only one

[@joaquinserra]

B16a seems legit lol lovin the tag

[@mr._.gallardo]

Best b16 I’ve seen so far

[@sonnyvillacorta9546]

That H2B life 👍👍👍

[@bighomieJ5X]

Best budget combo ever imo 👍🏾👍🏾🔥💯

[@sonnyvillacorta9546]

@@bighomieJ5X Agree 👍 currently what I am running in my Del Sol 🤙

[@bighomieJ5X]

@@sonnyvillacorta9546 what intake manifold u running ?

[@sonnyvillacorta9546]

@@bighomieJ5X i am Running the Euro R intake manifold on my set up

[@DrivenFilmsPhotography]

Maxpeedingrods ftw!

[@adybiluta]

How are you adjusting caster if it doesn't have the second joint? If you unbolt it from the lca to spin, with those holes being so loose, it is like hit an miss, not really accurate. I have a eg but watching your channel for the interesting content. Really appreciate a hard working person like you.

[@Markstarscoobs]

that where that junkyard h went i knew it would end up in a car... static out here being sneaky its only a 1.6 hahaa

[@avianaviator1570]

What cf hood is on the KRX? Im doing a k swap on my ed6 and I can't find a sir style hood for the usdm ef chassis.

[@rayperez6545]

Brought that fender to life!!🔥

[@charlesfernandez-693]

The fender is 🔥🔥🔥

[@matthewscarpetta]

can you jack up the car with a floor jack with the aftermarket traction bar like oem? The innovative PRO-SERIES can do that. i don't know which one to get for my crx.😵

[@crx_r6880]

H2b hell yeah

[@danielsplayhouse3804]

I have a 2003 Honda Element that I just purchased and I was wondering if they make traction bars like that for the 03 Honda Element or do I have to buy them and weld them in cuz I'm also doing a turbo kit on it too it has a k-series 2.4 in it

[@slivic4door598]

Bro where did you get the b series with the alternator on front??? I been looking for the same set up because i dont want to bash frame to clear in my hatch

[@streetfighters805]

I’m at the exact same spot in the build that’s krazy

[@projectenvoable]

You should safety wire the jam nuts when it's all set so they don't move with all the torque from the h2b

[@bigmanbuilds]

Maxpeedingrods: yo innovative let me copy your homework Innovative: ok but change it a little so we don't get in trouble Maxpeeding rods: *paints it all silver instead*

[@jaredthisdelle5617]

Now you need to wet sand the rest of the red crx that fender looking sweet .. def need to look at my traction bar bushings after this video on my type s tl

[@dummyjum]

That H22 though!

[@CesarsCarCorner]

7:02 “B16A Trust Me” lol

[@yamilnunez8994]

Hell yea 🔥🔥my on the way 💪💪🤟💯

[@TimSammartino]

yo Dana, why you got the tape over your logo? you at odds with your cuz?

[@HmmmSooGewwwd]

When did I miss the h22 going in???

[@rogerscorp]

Hi has anyone tried this traction bar on a ef wagon while keeping a bull bar attached with the bull bar brackets from ef parts cartel ? Will it clear ? Any info would help thanks as im searching for a traction bar for my b16 swap in my wagon

[@msal4193]

B16A trust me 😂😂.. something i would see on a craigslist add

[@AllMotorGang]

🤯🙉 I swear I thought I missed out in a video lol. Good 1 youngstatic

[@tacomonsta4301]

Love all your vids and are you going to the 1320 even in Bakersfield this weekend I would love to meet ya in person.

[@mattalberts9434]

Got one on the way! Thank you!

[@ogpaulw33zy47]

keep it coming my boy !! bless from thE IE !!

[@BrandonSrt01]

Where is the video installing it

[@bkhuu60]

Yo yungg you got any rsx rear coilover for sale

[@ZayedGR]

make sure the traction bar does not touches the cranck pulley when the suspension goes up

[@Op1zilla]

Nice, supercharge that ting,

[@DeadFront1319]

"B16A trust me" 😆😆😆😆😆Obviously!!😉😉

[@williamking9200]

When you removed the stock toe hook and I saw that fresh paint scratched/chipped from the bolts I cringed... Maybe get some touch up paint to keep that engine bay looking flawless..

[@landoski]

H2b awd?

[@josecaro5721]

Yes Sir 🔥✌

[@Dlegacyify]

That was funny B18A trust me

[@Eg_fshing]

Wait a minute was that a h2b in the hf 🤔

[@derek2778]

Lmao nice "b16 swap " love the engine stamp "b16 trust me " keep up the vids

[@angelm.4562]

Coupon code saves a good amount thanks Bro

[@hecks_k20_fa5]

I learned the heard way on the toe hook location 😂

[@ernestomadrigal160]

H22 bro nice

[@bigrob232]

2👍up bro

[@brodyschwarzel1474]

When that h series go in

[@pha-qall6435]

Uggaduggad the hell out of it I see what you said there

[@hartbeat8609]

Is it me or your B16 looks like a H22 with a pice of gray tape on the block that says, b16 trust me,,, 🤣 wtf 😂 keep up the good content

[@drsvenoo]

tractionbar looks like replica of the first gen from innovative

[@Macfrugal_]

Cheap copy cat company

[@sbeezy562]

Forreal i thought i just seen a h22 valve cover also 😂 but great upload bro

[@ohdamngetit7389]

10:31 bolt, washer and then wash your nut... LMAO

[@h2bhatch724]

H2b😍

[@h2bhatch724]

Seen the alternator in the front an I was trippin😂😂

[@fasterjjp]

Lets goooooo

[@rdevineg1]

i was like why is the alt hanging in the front lol

[@keithroe3323]

Lmao when did you swap the h22? I thought you were keeping the B16a, trust me lmao super hidden secrets

[@CaptainGSR]

Man, these holes are oval for a good reason. You'd better get these four bolts loosened to adjust the caster...

[@bigfrankhu2l]

nice awd h2b b16a converted mate aha

[@ekant6186]

Lmao that was a good one had me so confuse but I’m no what I saw H22

[@thetoddindustries1644]

H22 hell yeah lol

[@cass9581]

Yeah the valve cover look like an h22 I must have missed the video for that

[@386bear]

H2B!!!

[@joshuapagan2504]

What's up do you have a cry for sell stock

[@luisss.1k._612]

Wtf. When did he do the H2B??

[@cass9581]

He wrote on the block b16 with a sharpie that's so funny

[@NiftyHussle]

Yo static you 🇰🇭?

[@allmotorturbo6840]

H2b!

[@DanielTapiceria]

👍👍👍👍

[@PipoRacing717]

💪🏽💪🏽💪🏽💪🏽🔥🔥🔥🔥🇵🇷🇵🇷🇵🇷

[@hondacivicgeorgia6002]

good

[@jasz6178]

Just ordered it, thx for the major discount🙌🏼💪🏻. EF for life. I have that eBay one Nd hate how The car drives! Can wait till this get home. With love and respect all the way from Boston 617 JASZ

[@iammeng4o1]

Nice b16. Is that a new custom valve cover also? Lmao.

[@Mr.Saephan503]

BUT OLE B16 😇

[@deeone805]

B16 trust me hahahahaha you sly my bro hahahaha

[@mradidasppkfrmMCst]

H2B Crx

[@drosek2489]

Look at those haters. Smh don't watch the video's

[@pnw_element9822]

eBay everything

[@davidsolorio3226]

Yo Yoo, wussup bro, I hitchu on ur Instagram service, not sure if you had time to check it out but, I have a 91 CRX with some front end chassis and radiator support damage that I was hoping you can do ur magic and bring that thang back. I’m local in SJ and it would be an honor. Specially if you make some content of it💪🏻 lemme kno if thas possible and if you have time you can swing by so we can talk #s. Hope all is well with you and the family. Much love

[@hartbeat8609]

👍👍

[@loothunter22]

Thumbnail looks like an H22 lol

[@Racecarhuey]

Lol I scrubbed the whole vid looking for the h

[@jonathanbuck9881]

H2b Awd

[@janvos1986]

I see a h serie. Sneaky tuning.

[@loothunter22]

Ha! Surprise ruined!!! It is an H22

[@joshbeck9761]

Know a guy who's letting his CRX rot, right next to a 53 bel air. Effing pathetic

[@jgwgjpwljvmgllxoihjm2916]

text

[@rubyscharmsxo7240]

SO BORING!!!😫

[@vzazkrzrzapvkgvobvqp752]

text