Is this the new KING of AI depth maps for laser?

[@Tornadotuesdays]

Awesome video! Was pumped to see my coin pop up, looks so freaking good! You are the best!!

[@justinlaser]

Eyyy thanks! Coming your way soon.

[@I_Am_Your_Problem]

@Tornadotuesdays Bet you vote for the small red hat people.

[@jbreezy3146]

Personally it looked better before the brass black great video

[@MrOnzverge]

Thanks Justin for the video. I went the same path with depth map SW to realise that SculptOK is the best choice for depth mapping. 👍

[@DavZell]

The Z version is the only one that kept the bump over the ear area. Also, the dark circle you said was an AI artifact was in the original image. Overall, a great and useful comparison. Thanks.

[@a.aykutecer5195]

It's amazing😮 Which laser machine do you use?

[@K40Keller]

I would be very interested to know how often you have driven a cleaning path. And above all, how did you get to 320 runs? I think Lightburn can only do 256 due to the color depth of the image. Your video is very inspiring, but unfortunately a few small details are missing. So it's difficult to copy. 😞

[@StariusPrime]

All of these depth map solutions I find discussed on KZbin are online, and I really wish there was a good solution one could run on local hardware. I suppose everyone wants to commercialize the process but since so many local AI tools exist I would have thought at least one versatile depth map solution could be run on one's own system.

[@dinoscheidt]

AI models run on GPUs and have high hardware requirements. For me as an engineer it would be a pain to run these models reliably on my own machine and is not worth the trouble compared to running them on GPU servers in the cloud. That is the reason why not only the effort to create this kind of software costs money, but actually processing your image as well.

[@StariusPrime]

@ Yeah, I have the hardware and I want to use it however.

[@StariusPrime]

@ I guess to elaborate on my response, I already have a ComfyUI AI image generation workflow running on a Threadripper Pro system with two RTX3090 GPUs. The ComfyUI workflow is elaborate but it would be perfect if I could get that level of depth map processing tied into it. I just haven’t found a solution to do that.

[@TheCollabCurator]

Another KZbin gem. Great video full of useful information. ❤

[@_SurferGeek_]

"...this little hole here... probably an AI artifact..." Definitely never played football. ☺ Thanks for introducing me to SculptOK. Going to be a lot less clean up on my part. At least until the next improvement. 👍

[@GroundedConceptsLLC]

Love your channel brother. Therapy watching that coin get engraved

[@6r4metroman]

Thanks for the video, I have used this programme before and as you say the results are fabulous. I did notice you had your passes set to 320, just wandering what difference this make as there are on 256 gray scales in the depth map? Cheers

[@Nightravenusa88]

Justin, Gr8 Video and review!! If you could try the engraving in Lightburn without the Depth Map conversion. My theory is that you will receive the same results as the SculptOK in Lightburn 3D Slice without converting the image to the Depth AI.

[@justinlaser]

I have tried it it doesnt work well. You can see the difference in the souce image vs the depth map it looks similar but the shading is in different areas.

[@mostlywater4555]

the added depth was very nice - was a bit surprised by the laser picking up the edited area on the lower part of the helmet - curious of localized guassian pass or two would smooth that out

[@meridacavediver]

Been using this for a while, much better than the other ways to do it

[@AndrewGonzalesArtistry]

Can you buy credits or do you need to maintain a monthly/yearly subscription?

[@sokarber]

That looks amazing. Would you mind posting the settings you used on both sides of the coin and what wash solution you used in your tumbler?

[@Scott300300300]

Looks good. Do you mind if I ask how much you charged for it? How long it took? How much is the coin? Thank you

[@justinlaser]

I charged around $70 since the artwork was clean and I knew I would make video content with it as well. If I ran it without filming, etc wouldve been around 1hr 30mins to complete everything. Takes a while to run. but I can do other tasks during that time.

[@nathanwolf5547]

A great episode. Thank you! Wishing you a Happy and Prosperous New Year!

[@Nonprofessional_Tinkerer]

Very nice work, think we've conversed before in the FB groups, very curious about your magnetic tumbler, i have the rolling style but not looked into the magnet ones yet. I like the results on the coin, wonder how well it does with an image that is not as well made to begin with. time to experiment hehe

[@jackjfb8439]

Have a great New Year, Justin!

[@Zeke-Z]

Awesome video! I am going to email Richard. What wattage laser are you working with? I must have missed it.

[@misterthefun]

Super cool! Respect for Justin

[@munro4398]

Amazing as always! How long do you leave it in the polishing machine, just add water and the medium? Happy New Year!!!

[@dansv3872]

It works great ! Do you have an estimation for the time it took to engrave the coin ?

[@justinlaser]

Thanks! Took about an hour and a half for 320 layers.

[@dansv3872]

​@@justinlasergreat ! I was waiting for AI to get to this point to make me buy a 60w 😅 I've tested SculptOk with so many photos of people and the results are amazing,it opens up so many possibilities for deep engraving . I really appreciate the info,you are doing a great job !

[@asseenonline7951]

​@justinlaser are people typically getting sticker shock from having to pay 1.5 hrs of time for a coin like this? (I'm unaware what people are willing to pay for items like this)

[@mjunger2012]

Very good comparison. Will be trying out SkulptOK

[@CGW11]

Interesting! Using Smudge in PS was not the best choice. Auto healing brush would be better. The little engraving defect might be a result from using smudge.

[@christopherd.winnan8701]

Great find. How much did you charge the customer? Do you think that you could do hobo coins in the future?

[@justinlaser]

Around $70 since the artwork was clean and I knew I would end up using it to make a video as well. I would love to do hobo coins. Generating from AI image would be easy but modifying existing coins the way theyre traditional done Id have to play with.

[@christopherd.winnan8701]

@@justinlaser - Do you think it would be possible to replicate the work of Roman Boteen? kzbin.info/www/bejne/boPLdqltrLOtp8k I hear that he charges a lot more than 70 bucks!

[@UKGoldPanningAdventures]

Brilliant video and i will be giving the SculptOK a go later on. Happy new year and keep up the great content. 🍻

[@justinlaser]

Thanks! Happy 2025!

[@WuanHih]

Happy New year, thank for the info

[@GregK2754]

Great video, Can you give setting info on your clean up passes? specifically at the end @9:45 Thanks!

[@justinlaser]

I did something like 3000/20%/145 freq. Same line interval and cross-hatch twice. I tend to go lighter than most other since I do a lot of cleaning afterwards.

[@jolene6911]

@@justinlaser Do you happen to know if it's possible to do the cleanup pass in xtool creative space or is this a lightburn only thing ?

[@Jasonwan-w2y]

Great work happy new year man how long did it take?

[@Wisam4443]

Thanks!

[@justinlaser]

Thank you so much!

[@Wisam4443]

Thank you for the hard work. I appreciate that

[@sherlockhomes9919]

Blender and what app was mentioned as the best to do this stuff? Spire is it?

[@adrianobanuta2588]

Fantastic. However, I don't understand where the removed material goes, no dust or fumes are visible.

[@gregmoffatt5703]

Thank you for the settings!

[@OMGLaser]

Happy New Year! 🎆🎉

[@georgeheleine5209]

You do such Awesome Craftmanship! I have the xTool F! Ultra and want to try some coins and learning a lot from you.

[@justinlaser]

Appreciate it! F1 Ultra can do this as well just takes a little bit longer run time.

[@pakoyones]

​@@justinlaser being The F1 a 20w fiber, vs your 60w laser, could one assume that The time to engrave would be 3x? 3 times The 1.5h It took yo you, that is, 4.5h with a F1 ultra? Seems too much time for a single Coin, right? so i Guess It would be better to get a more powerfull fiber laser if one goes to engrave a lot of coins like this 🤔. Thanks for your superb video!

[@johnny0110]

Just curious if you tried Truedepth with Blender?

[@dian3145]

Have you done a video (and I somehow missed it) taking a basic grayscale image and running it through to getting an image like your stating one? I have epically failed at blender 🤣. Thanks for the intro to SculptOK. I have been disappointed in depthR, and end up doing a lot of post processing. Wishing you the best for 2025!

[@justinlaser]

I did cover that a little bit in my first AI coin video. However its basically just what kind of words to use when using an AI prompt. I dont know how to make them from scratch either haha. Im going to dive into Vectric Aspire this year it seems to be the "easiest" one to get the type of results we want. Happy 2025!

[@sherlockhomes9919]

How much to make a coin? I have my own design.

[@CoolBruhDesign]

Great video. Love the detail!

[@justinlaser]

Appreciatei t!

[@3DHP]

Great video Justin , I will checkout Sculpt ok. Thank you and Happy New Year my friend. Shared on my Socials.

[@justinlaser]

Happy New Year my friend hope all is well!

[@GenericHelper]

Hi! What laser machine are you using? Thanks

[@robinp.9886]

Très intéressant. Merci d'avoir activé la traduction audio.

[@ltrick2387]

Awesome. Thanks for sharing!

[@justinlaser]

Thanks for watching!

[@mikechavez7844]

You have any videos on aspire?

[@davelordy]

Looked nicer without the brass black finish.

[@MindAkerKnives]

I have that same Tumeber 🙂

[@AndrewGonzalesArtistry]

Do you have to have a *monthly* subscription to SculptOK, or can you just pay for credits?

[@justinlaser]

I think you can just buy credits Ill have to double check

[@stewartwhittier3455]

Great work! Is this a fiber laser?

[@justinlaser]

Yes indeed! 60w OMG fiber.

[@stewartwhittier3455]

@ thanks!

[@WmYoung-g7z]

what type and what make is this laser?

[@justinlaser]

60w MOPA from OMG Laser.

[@alexanderstohr4198]

08:20 - the little hole is originally in your template. do NOT remove it. ;-)

[@alexon2010]

Poderia publicar o video em Português por IA

[@jf6720]

What machine did you do this on?

[@justinlaser]

60w OMG fiber laser

[@MbManman]

great idea! thanks so much. I liked & subbed also

[@justin.c.taylor]

It seems like you don't want to provide a service for making coins though. I could not find any details. Could you expand on this in your newsletter or website? If not, can you review others services using the prep skills you've help your audience develop?

[@thomcarr7021]

Recent improvements for sculpting using Blender has made all of it much easier. If someone is willing to invest 20 hrs and watch the tutorial videos , they will find this a huge step in successful artwork.

[@beansandwiched]

You got a link to the training videos?

[@thomcarr7021]

@@beansandwiched There are thousands on youtube , starting and then move to sculpting . Find an instructor/channel you like. Best to watch those less than a year old because of all the improvements.

[@LaserEngraving911]

Great video man, way to end the year! now on to 2025

[@justinlaser]

2025 and onward. Happy new year!

[@JoeF330]

First! I've been so intimidated about doing depth maps and I have a 100 watt Mopa just sitting collecting dust

[@justinlaser]

100w? You have a coin monster on your hands you need to turn that thing on haha.

[@JoeF330]

@justinlaser I seriously need your course.. I bought this thing and I've got nothing with it.

[@user-uy2nl5vp6m]

@JoeF - Grab your laser safety glasses and go mark something! Just play with it, don’t do anything you only have one of, but there is just so much fun to be had. (Also grab a decent dust extractor or grab fan and wear a mask, you, your family, friends and pets don’t want to to breath the residue)

[@keeganoconnell2686]

I've heard numerous times that letting your laser sit is one of the worst things you can do to it within reason. I just bought myself a 50w fiber and the more I mess with it the more I learn. I have faith in you!

[@JoeF330]

@keeganoconnell2686 thank you! Yea I don't want to wait forever and it be old tech

[@Insane_Kane]

This tool is pretty good but it has some problems with for example anime faces, the ai model just adds a random nose :D

[@justinlaser]

Haha I havent seen that! Thought it would be good enough by now not to add extra noses and fingers.

[@Lettuce-and-Tomatoes]

Very cool!!! How much for a coin like this featuring Riley Reid’s baby maker front and center? There are plenty of reference images online for free. I want to give it to one of my buds who’s getting married later this year to remind him of all of the incredible strange he’s going to be giving up. I’m sure he’s still going to get married, but it will be funny. The budget is flexible and generous, just like the subject of the coin. TIA!!!

[@lanesteele240]

Man it took too long to get to it

[@hanswurstusbrachialus5213]

Subscription models are always a red flag...

[@SculptOK]

Hello my friend, we are not currently in a full subscription model. You can freely choose to purchase a one-month plan or just purchase credits.

[@jeffchisamore1556]

I was interested, but lost it. Both tools are paid subs. So you're tutorial-ing, evaluating and basically promoting as advertising. Good for you, but it's wasting my time.

[@SWLLLC]

this product using all kinds of open source and copyright algo's and does not disclose or have a license , no actual company info. this is very bad and should not be endorsed

[@SculptOK]

Hello, Thank you for your concern. I'd like to clarify a few points: The AI model is trained by us and does not involve any third-party copyrighted materials. All the code we use is either under the MIT License or the Apache License 2.0. These are permissive open-source licenses that allow for commercial use and distribution, as long as the license terms are adhered to, including proper attribution and notice of changes if any.

[@SWLLLC]

probably should do your homework and make sure the product they are charging for is legal

[@outdoorops5325]

The link for the fiber laser leads to a website with no price or add to cart

[@Dontess22]

take some life art drawing classes because that football helm is broke as hell... that face mask is misshaped prospective is way off... if i was presented with that coin i would throw it in the trash as soon as i got it... stop relying on programs you can draw the height map if you know what you are doing... and they can be made in seconds...