Customer States (Welding FAILS Compilation) | Just Rolled In

[@JustRolledIn]

Hope you guys enjoy this booger weld compilation! Submit your clips/photos on our website at www.justrolledinyt.com

[@thewubmachine840]

its not pined

[@brantmcfarland517]

Can people be that dumb. I just don’t get it. Thanks for sharing.

[@thealgonquin5822]

Had to come back because I forgot to leave a like.

[@RM-lv9ng]

Welding as a form of impressionistic art.

[@Torsee]

After your first two inches of Booger Welds … Go back to school!

[@Be4tJumper]

Some of these 'welds' are almost like art. the patience and comitment to doing the wrong thing is staggering

[@nuclearmedicineman6270]

It's a wondrous thing when you have more time than talent.

[@computercrack]

This. You could place this in a museum of modern arts and win a prize

[@sungear]

I literally don't know how you'd do some of these welds, meaning I couldn't duplicate the carnage even if I tried.

[@davestevens4263]

I couldn't do this artistic of welds if i were drunk , blind folded & no arms . Keeping shit real , say your preyers these people are your neighbors & drive on the same roads as you !!!!

[@Sonny_McMacsson]

Also the random junk welded together is like a modern sculpture.

[@russellhltn1396]

You know, I have more respect for customers who are honest about who did the work instead of "another shop".

[@JustNobodyButME]

Or "a friend "

[@Aaron_Hanson]

Right? Who dafuq is trying to run a business to lose money? $460 worth of wire to fix a $200 exhaust?

[@cyphi474]

Customer decline repairs. Try fix it by himself. Go to another shop and claim "other shop did it".

[@MrSaywutnow]

"Structural booger welds" is a phrase that makes me laugh and cry at the same time.

[@thomasfletcher760]

Hey , " snot " funny 🤣🤣

[@thewubmachine840]

the. best of funny

[@Ironraven001]

Haha came here to say this 😂😂😂

[@robertpierce1981]

I came here for the booger welds I was not disappointed

[@Batmann_]

Don't worry, they were done by 'another shop'

[@KubotaKid]

Over 30 years under a welding hood. I’ve seen a lot but oh man, the dedication to doing it wrong is strong with some folk.

[@rogerhuber3133]

I've been a mechanic for 60 years and I'm the first to admit I'm not a good welder but my worst looks better than anything shown here. Absolutely amazing the shit people do to their vehicles. Quite scary knowing these things are out on the road with us!

[@WALTERBROADDUS]

Where are all these amateur welders coming from? Are these like dropouts from Lincoln Tech or something? Is this like an offshoot of that, "Forged in Fire" home knife/sword making hobby?🤷🏽‍♂️🗡

[@thra5herxb12s]

Under UK law, vehicles have a safety inspection every 3 years and are pulled from the road many many years before they get this bad.

[@anythingcoolwastaken]

​@@thra5herxb12sInspections are annual, starting 3 years after first registration.

[@1pcfred]

This sure made me feel better about some of my less than perfect welds.

[@j_taylor]

​@@thra5herxb12s Same here in Massachusetts in the US. Many US states do not require safety inspections, though.

[@PsychoticusRex]

This channel is the best answer for the profound need for state safety inspections, environmental compliance inspections and so on. good freaking god these people are a menace and these poor mechanics are the only ones who can save us from their sense of adequacy.

[@vehicles_n_stuff]

It’s also even more proof we need more/better public transit, because some of these people just shouldn’t own a car.

[@x808drifter]

​@@vehicles_n_stuffMost people who drive shouldn't.

[@BlackPill-pu4vi]

@@vehicles_n_stuff Yep. A century ago, we had the world's finest rail system and street cars were common in big cities. It could be done again albeit we'd have to import everything. All of the old manufacturing skills, habits, tooling, and factories are long gone.

[@rogerwagner6940]

And yet, the road toll gets worse with more regulation.

[@jackradzelovage6961]

no, we need to go back to when cars didnt try to save you from yourself constantly. they need to be like big tractors, where if you dont know how to use it you just know not to touch it. manual transmissions. carburetors. things that if you dont know how to use them youll kill the whole car within a few hundred miles. i live in an inspection state and i can tell you our cars arent much better than these, the difference is that these can go a few months or years still working like that before anyone notices. the downside is that we throw away so many perfectly functional cars for absolutely bs reasons because inspectionsssss. they arent as great as they seem on paper.

[@Pyroteknikid]

When installing a new exhaust, always make sure to use the ENTIRE spool of wire.

[@thewubmachine840]

Then weld

[@Pyroteknikid]

@@thewubmachine840 Right? The first spool is just for surface prep.

[@Boodieman72]

Make sure it's at least a 10 lb spool, those 2 lb ones just don't hold.

[@Ironraven001]

And hold the welder at least 6" away from the steel 😂

[@michaelprather8371]

If you have to replace the wire spool more than once, you might be A) a red neck welder B) doing it totally wrong.

[@matthewl.8312]

This channel might be the most quietly terrifying channel on KZbin. Well played.

[@rogerwilco2]

If you live somewhere that does not require mandatory yearly safety inspections of all vehicles on the roads, then contact your politicians.

[@hazelanderson1479]

Good to see that shops are reciprocating on the customers who “decline repairs”.

[@HighSierra1500]

Sometimes you have to decline working on the customer's vehicle if there is more risk than benefit. Where I live, I've seen Buick Lucernes with low kilometres that look great sitting on the ground. But once they are up on the hoist, I can tell it's rusted out and ready for the boneyard.

[@stringlarson1247]

@@HighSierra1500 I've done the same on 'small' electrical and plumbing 'handy man' jobs in old homes in my area. Don't want to be the last person who touched it.

[@tonysheerness2427]

The customer could say they did it if they worked on the car. I would not touch any of them with a ten foot pole.

[@davidweaver2156]

To try to fix your fuel line leak with a welder truly puts you at another level

[@darkdelta]

Or another plane of existence, or more likely non-existence.

[@gregdowle8031]

It's more of a depth than a level.

[@jonasthemovie]

Diesel, nothing to worry about.

[@SaxaphoneMan42]

that cracked wheel is probably the best welding work done on any of these clips, though I'm sure that would have been fun to try to balance to say the least.

[@Razmoudah]

In the US, it's also illegal to use a welded rim. The weld creates a weak area that will be prone to breaking, causing it to be unsafe. Other than that, I completely agree about the welding job done on it.

[@darthkarl99]

Yeah, it isn't the prettiest weld ever but that looks at least passable to my eye.

[@soaringvulture]

That's presumably an aluminum wheel (I hope it's not magnesium!) and while the usual alloy for wheels is weldable, you have to heat treat the part after welding to get decent strength in the welded area and heat-affected zone. Of course, that wasn't done on that wheel which is why it's a really dangerous item.

[@hifiandmtb]

@@Razmoudah It's illegal to weld a wheel in the US? Is everything else on this channel legal? 🤣

[@CainXVII]

Sure, but that weld anywhere else on the car wouldn't have made it onto this channel

[@61rampy65]

The Astrovan with the welded idler arm and no front shocks, and the trailer coupler that was unwelded are two of the scariest stories on here. We all know that they continued to drive or tow with all those problems. Really gotta love the Chia Pet welds on the exhaust pipes on so many of the cars!

[@straybricks]

Using a welder to fix a fuel leak sounds like a Darwin Award candidate.

[@1pcfred]

I've welded a leak in a gas tank. I cleaned it out real good first. Still smelled like gas though. But it didn't blow up.

[@TheChrisey]

@@1pcfred I did that too, only because it was on an old import car that doesn't have new parts and the cars themselves are rare. I flushed it multiple times, but it was still a bit scary. I TIG welded it tho so perfectly sealed

[@stevelattimore1413]

My late brother-in-law was a certified welder and tried welding a tank with gas in it.... that's why he's my late brother-in-law.

[@joshaulis8326]

I’ve done it, saved me from having to find another for an ek civic and it literally took me an hour to disassemble and Zeus her.

[@matthewchandler7845]

THANKS! I thought I was alone on Earth for just 1 sec....WHEW......

[@eaglerider1826]

Watching these clips makes me thankful that I live in the south without the major frame rust issues .

[@jackradzelovage6961]

nh resident... every car i own right now is from virginia and north carolina for a reason :P

[@catey62]

It must be really hard dealing with the issues that your salty roads cause there. I'm lucky that here in Australia we dont have that problem. though you still get those that get their cars stuck on the beach and wind up with saltwater damage, but they are few and far between.

[@jayschoenhaaar5369]

Some of this work by “friends”. With friends like this you don’t need enemies.

[@DavidEdwards9801]

if you knew my friends, you'd understand why I don't have friends!

[@Bialy_1]

It is a code name for "i did it myself", it is more inteligent version of "some other shop did it". It is super unlikely that you giving your car to a friend that is as clueless in the topic as this but hesomehow is ready to butcher the job anyway and waste so many hours on something that will give him zero appreciation from anyone. But maybe i am wrong and comedy "dumb and dumber" was a documentary...😅

[@kevinknabe7252]

First thing I thought. When I heard him say " by friends". I said out loud. " are you sure?" 😂

[@kimberlyhall7610]

For real though!!

[@doorguru168888]

I doubt if any friends did that they probably did it themselves. It's like saying the dog did it.

[@Goodgu3963]

I think what's most impressive about the massive weld jobs done poorly, is that they are done consistently poorly, indicating that not only did that person have absolutely no idea what they were doing, but that they spent hours (tens of hours?) welding and learned absolutely nothing that entire time.

[@1pcfred]

That's the impression I got. We can all start off with the wrong settings for a job but you're supposed to dial in so the process works. Everything I'm seeing here they just forged on.

[@DrakeN-ow1im]

Some people are simply incapable of learning.

[@1pcfred]

@@DrakeN-ow1im there's certainly things I'm incapable of learning. Easy to their ability.

[@CainXVII]

I feel like these are people who don't even know what a proper weld is supposed to look like. Metal on pipe = welded

[@billysolhurok5542]

J.R.I.-just retarded idiots

[@DJCustomBaits]

the jb welded oil filter killed me. Bro they are like 17 bucks at advanced. 🤣🤣🤣

[@09corvettezr1]

And the brake pad backing plate welded to another brake pad backing plate to make one “new” brake pad.

[@Batmann_]

Yeah...out of all of these, that one seems like maybe it was the easiest to fix. They probably spent more on JB-Weld than if they'd just replaced the filter.

[@amythistxue1]

@@Batmann_ that was 100% my thought, filters are not that expensive and hell with how clean that filter looked you could probably have just returned it as defective and gotten a new one for free

[@th3R0b0t]

@@amythistxue1 A JB-weld in the hand is worth 2 oil filters at the autoparts store?

[@markrahner2065]

Giving the booger welder credit where it's due, at least he didn't get a drunk driving conviction for driving to buy an oil filter.

[@chrisalex8340]

The 7 billion “tack” method is painfully hilarious. The fact that there were so many examples of the method being used absolutely mind blowing.

[@09corvettezr1]

You would think that there would be some improvement in welding skill after the 6 billionth tack, but apparently not.

[@matthewpauls2498]

@@09corvettezr1what blows my mind is its done the same way on every joint. youd think after the first 1st or 2nd theyd think "maybe im doing this wrong"

[@darksuns7384]

Welded the fuel line, wowzers.

[@petermontoya1796]

How there wasn't a fire I don't know.

[@mikefoehr235]

Almost got the Darwin award

[@Yora21]

If you drained all the fuel, and flushed all the vapors with compressed air, then sure. But with welds like these, we know they didn't do that.

[@petermontoya1796]

@@Yora21 Sounds like YOU'RE the one who did this lousy weld.

[@sachadee.6104]

@@Yora21 exactly. Scary stuff. Lucky welders.

[@DavidSprings]

"And he re-did the whole exhaust for the customer." How refreshing! Much better than "customer declined repairs."

[@deaks25]

These mechanics are far braver than I am; I wouldn't want to be underneath most of these vehicles as they look like they could just break apart at any moment!! The phrase "Just enough knowledge too be dangerous" applies to pretty much everything here!!

[@TehButterflyEffect]

They regularly get under cars that are on lifts when the safety stops aren't engaged. The car falling apart is the least of their concerns.

[@ManiacRacing]

As a long time welder, can confirm. I had some real hilarious repairs brought into my shops to be fixed right after some of these guys got at them. My personal favorite was a 72 Dodge Dart with a rear frame rail and leaf spring mount made from booger welded 1/2" thick diamond plate steel. The "repair" was so heavy the entire side of the car drooped and the tire was rubbing the inner fender liner. I cut out the entire trunk floor and both rails and it must have had 700lbs of steel attached. It was truly crazy. Whoever did it had to have spent HOURS doing all this stuff, especially with the welds it had. True dedication! It took like 2 minutes to cut it out since it was so poorly welded. The girl who owned it was horrified when she saw the mess.

[@jeffrobodine8579]

Soup cans were the best for fixing exhaust leaks on my car when I was a broke kid.

[@61rampy65]

Pepsi cans and hose clamps for me. Pepsi cans are aluminum, and saves weight.

[@elcaminokid31]

I did both. Soup and soda cans with hose clamps. Worked decent till I could afford to get it fixed

[@Peeter8]

Yeah it sucks when the crack is on or near a flange.

[@classicgmdiesel1248]

Soup cans are thicker 😂​@@61rampy65

[@knavekid]

Don't forget the JC Whitney reinforced exhaust repair tape!

[@Scruffy72]

Man as an amateur working on my mustang, seeing this makes me feel real good about my welds. I thought mine were bad but these are on another level. Even had to replace the rear frame rails with custom one.

[@Kim_Miller]

Just Rolled In induces existential angst in his audience without a single shot of spray foam.

[@joshcarter-com]

I started watching this right after rolling out of bed and before my coffee could take effect. Now I want to climb back into bed and hide for the day.

[@DrakeN-ow1im]

"The shop/technician refused to work on it." Best decision ever. In many businesses the quality of the customers is as important as the quality of the work which keeps them coming back when something else needs fixing. Good work for good customers will often bring in more 'good' customers: The power of "word-of-mouth" advertising is often seriously underestimated.

[@HandicappedMind]

Some of the most glorious weld nests i have ever seen.. They remind me of those sculptures of insect mounds.. when they pour the molten metal down the hole then dig them up rofl.

[@rnreajr9184]

I've seen some bogger welds in my day, but some of these were like terrycloth!

[@markh.6687]

One of the welds reminded me of a porcupine ("Ouch Mouse" to dog toy owners) :)

[@AndreJohnson-jk6ko]

It's reassuring to see these videos and be grateful for living in the southern region where major frame rust problems are not as prevalent.

[@nuclearmedicineman6270]

This makes me feel pretty good about my welding.

[@1pcfred]

I know I'm not the best and after watching this video I'm sure I'm not the worst either.

[@grant9939]

Same here buddy!

[@bufonidae5173]

I know I thought I was bad at welding but damn at least the ones on my exhaust are all straight and solid even with my gas shield welder randomly turning the gas off and fucking me up a few times

[@jakewatkins1116]

The customer did not mention what other shop did this, is my favorite running joke hahaha

[@philiprice7875]

i think it was aunt bettys bagel bakery

[@fredygump5578]

Lol! "I don't know what he's doin', but he's doin' it himself!"

[@kd5nrh]

And spending more on JB Weld than it would have cost to just grab good parts from a scrapyard.

[@4BillC]

These make me feel so much better about my welds. I've never had anyone show/teach me how to weld but mine look professional compared to these!

[@dudewheresmycar908]

I can't imagine why that u-joint was vibrating 🤣

[@JustRolledIn]

Needs more welds to balance it out 😂

[@nuclearmedicineman6270]

Nothing a can of spray foam couldn't fix.

[@rogerweller1266]

Well, it’s clearly because they welded in the wrong thickness of washers.

[@HighSierra1500]

@@nuclearmedicineman6270 The spray foam from Demolition Man!

[@richardwarfield7386]

U-Joint not U-ing anymore

[@lukeyarasheski5510]

The oil filter is wild. Used 8$ worth of JB Weld on a 5$ oil filter

[@Rygoat]

2:43 holy shit. I think that qualifies as art because it stirs up emotion

[@sterni42]

I am here because my old vw bus is rusty and i want some tips for welding. Thanks for the good instructions, but i think it is to much effort and i will maybe use just spray foam 😊

[@AetheriusAri]

Can we get a video of the opposite? The BEST weld repairs you’ve seen? Weird, unexpected repairs done with a welder/JB Weld that are just amazing. And ones that improve the car beyond OEM!

[@JustRolledIn]

Unfortunately don't get any of those to show 😅

[@darkdelta]

Those decent repairs, well they lack a certain flair for creativity. Without the JRI videos, the creativity of "the other shop" would be lost to a few local witnesses. Here we all reap the benefits.

[@DJdoppIer]

*(**1:44**)* - It's like the person just took whatever metal items he could find in the garage and welded them to the vehicle. Holy crap that is insane!!!

[@uweharms5280]

Never waste metal parts-what lays on the floor

[@ekummel]

My question is, how can the guy doing the voice-over do so without bursting into outrageous laughter! I mean, I'm watching this and my sides are hurting! I can't imagine trying to read copy for these disasters!

[@demonorb8634]

Makes me happier after a colleague was slating my welding. So far my work hasn't failed but his has!

[@hadtopicausername]

I did patch up a hole in the spare wheel well on my car once, in the most botched way you can imagine. But that was just to keep water out until I could get it properly fixed, which I did a couple of weeks afterwards. Some of these folks on here are on quite the level!

[@briankress9997]

That one exhaust had $100 worth of JB weld on it. Lol.

[@Whateva67]

Yeah but he saved 400$

[@dividivus]

Some of those welds looks like the swallows nest. Pure art.

[@Ironraven001]

Remember to hold the welder at least 6" away from the steel to make sure you get the maximum amount of bird shit on there.😂

[@davestevens4263]

Thats rite , that's exactly how these f k tards did . Min 6" - 10" for maximum art value out of your welds .

[@rhkavli]

Indeed! And as an additional bonus, you can skip the shielding gas that way. Pennies saved!

[@teknikgroup7597]

yes and if its a mig, wire feed speed up full blast and the amps down moderatly low...i can imagine the tik tik tik tik sound of the sputtering...I was a welder for 20 years before i embarked on a new career and the welds are.....evil.

[@stevie-ray2020]

Also, don't bother with a welding-mask when you need to see what you're welding! Another thing is best to add a couple of zip-ties just in case!

[@_EmptyBox_]

I'm going to keep this video in mind every time one of my favourite content creators say they're bad at welding. I'm hoping it will lift their spirits, and give them confidence that they're almost professional in comparison to these.

[@sdolnicek]

"It´s a load-bearing booger ! "

[@llorttaf]

It take hours to make that many stuck welds. True dedication.

[@thomasbabcock5174]

My friend has owned his own muffler shop where we live for 25 years..oh the stories he could tell ya about some welds he has seen.😂😅 He started taking pictures about 10 years ago,and posts them on his bulletin board.😊

[@leftyo9589]

welding on not just a fuel line, but a leaky one is just too classic!

[@markdanielczyk944]

Welding experts!💪👍👍

[@JustRolledIn]

Only the best in this video lol

[@thewubmachine840]

to Fix rust matel and more

[@markdanielczyk944]

@@JustRolledIn Best of the worst!

[@aserta]

I genuinely don't understand how people end up welding like that. I picked up my first welder at... 11 or 12 years old. The type with the carbide gas that you had to fill up and wait for the gas to fill up and raise the catch tank. I was told what to do, and sure, it was a sh!t weld, but it wasn't anything like this. I got my first stick welder (second hand) at 15. Wasn't told how to do anything with it, welder better and better. Never popcorn. My first mig and tig rig was at 16 and while i had issues with melting through, i've never managed to make popcorn out of it. Most of my early learning was by ear. I was 21 when i went to properly learn how to weld. I never saw welds like in this video (and across the internet) from any of the other people who learnt welding in that class with me and we were 30 people in that class. So i must conclude that this is just a super power... but in the negative. You have to be special to popcorn.

[@denisohbrien]

give an amateur a mig welder that requires gas, but they are too tight to buy the gas or flux core wire and this is the result altho interestingly even then your welds just look like a coral sponge of everything else is ok, these welds were for sure done with no gas, no flux core wire, under current, and at a distance (I heard a welder term it "fly fishing the weld in" if you fish, its a good description. And a shame, 3 minutes of tuition and every one of these welds would be a mile neater.

[@rockyj2008]

LOL!

[@K9River]

There's not a cave in the world that can match the beautiful, crystalline structure known as booger welds.

[@richardwarfield7386]

welding a fuel line - Darwin award material right there

[@danstubbs5032]

WOW 😳 terrifying that we're sharing the road with these death mobiles.

[@coldlakealta4043]

amen

[@davidbarnsley8486]

Now all we need is a spray foam fixes everything episode 😂😂

[@AaronPowellvox]

I don’t understand how so many people can be so clueless these days with all information on any subject on the internet. We used to have to go to the library for this information and it was hard to find.

[@1pcfred]

I've seen people using stop and go welding on the Internet. Done right it works. Done wrong you get what we're seeing here.

[@jamesharmer9293]

It's amazing that these people are still alive.

[@DirectCurrent4u]

$70 bucks via Amazon and You Too can be a Welder!🤣

[@petermontoya1796]

At least take a course at your local community college.

[@roberth7691]

Wouldn't matter if it was a $5000 Miller!

[@Raymo2u]

I have a $130 Chicago electric and it's really decent at it's job...the machine is only as good as the person using it

[@ChevTecGroup]

At least watch some youtube videos...

[@narancs5]

Buy it together with the grinder to get the pro package.

[@JerGol]

Amazing but that Lincoln navigator broken before ever being delivered was one of the most amazing. The fact that people did this welding stepped back and looked at their work and decided it was good enough is just stunning.

[@corey6393]

Some of these folks welding up exhaust systems should switch to making metal art porcupines. Pretty sure that is where their talent lies.

[@chrismorris2137]

Get chills by looking into a crystal ball & see these customers in the future working with their welders on an electric car, god forbid 😮‍💨

[@davidp2888]

Tried fixing a fuel leak with a welder. 💥

[@janb.2025]

I welded several fuel tanks in my life, but always turned off the ignition before 😉

[@JohnLeePedimore]

The three stages of welding. 1. Pecker Weld 2. Booger Weld 3. Hornet's Nest

[@izmark671]

It's easy to turn on a mig welder. Pretty fireworks too.

[@justinblake7355]

Got to love those hairy FCAW welds. Like a Chia Pet.

[@Matticus289]

Thank goodness we now have spray foam to handle these kinds of repairs

[@ashleyking6743]

I had never welded before and I bought a welder just for the sake of wanting to have a go. Even with no experience I have never done a weld as bad as some of those. Not even sure how it’s possible lol.

[@Rev.RatsRides]

This was excellent!! Structural booger welds 😂🤣😂🤣 your the best!!!

[@davidmitchell7183]

7:25 That is pretty good aluminum mig welding if you ask me.

[@Projectmetalworkshop]

Fr it looks great

[@84gssteve]

I'm no certified welder, but I have been welding equipment, rock crawlers and trailers up for 30 years with good results. We all have to learn with practice, and I didn't know what I was doing in the beginning either........that said, I cannot for the life of me understand how so many people can lay down that much wire without stopping and asking themselves, "Should I stop and try something different?" I mean, have they never seen a proper weld before?.....do they not put together that this looks NOTHING like what it should?.....Baffling!

[@weekendstuff]

Fascinating "repairs" you have there.

[@frankwilson1776]

They drive among us. Greatest pro-seatbelt video ever.

[@martindenny8642]

No good if seat belt mountings are rusted through

[@TechDove]

I am absolutely blown away by some of these popcorn welds. Holy hell

[@flyboy2610]

"Here, Bubba, hold my beer while I weld this fuel line!" 🎆

[@sachadee.6104]

LOL

[@DG_427]

0:38, I wasn't ready for that.

[@ElectroTree01]

These people must be exhausting more time and money than it takes to have someone do it correctly.(mainly the welded exhaust clips)

[@davidjones332]

Exactly. They could probably have bought new parts and bolted them on faster and more cheaply than buggering around for hours trying to weld them.

[@KOSMOS1701A]

i love it when a customer comes in saying "another shop" did terrible work

[@Valks-22]

The worst one are the cheap ones, what's the thought process behind trying to DIY fix a leak on a fuel line or a tie rod with a welder...

[@355east3]

One good thing I can say is the people who took the time to build up thise masses of Weld definitely have lots of patience

[@Paulie1232]

From foam to JB weld...what's next Zip Ties

[@MrSaywutnow]

Flex tape?

[@hpower8311]

Flex tape!

[@fders938]

Zip ties stuck in a JB-welded piece of metal covered with spray foam + customer declines repairs and drives off.

[@MattBrownbill]

Bailing twine? The farmer's favourite. Well it is here in the UK.

[@petermontoya1796]

Duct tape ?? Super glue ?? Chewing gum ??

[@SimonUdd]

First time I ever welded something was plates over old oil fill holes made by the previous owner. They were not especially good but comparing to these welds I should be proud

[@patrickpelletier9298]

how much does JB weld cost compared to an oil filter?

[@Stephen-ro5jc]

Looks like the standard 2-tube kit is about $10. They may have gone through more than one package 😀

[@patrickpelletier9298]

@@Stephen-ro5jc I just went with a random big truck (assuming oil filters are bigger for bigger engines, i might be wrong), and it's around 8 for an oil filter.....

[@Chris-bg8mk]

The welding on that cracked rim doesn’t look too bad! 👀

[@bassthunder819]

...when i watch these videos ..all i do is laugh....wow.....

[@DrakeN-ow1im]

I shudder in fear that one of these abominations might be sharing a road with me.

[@jimkavalier2831]

Once in high school, we went to the modern art museum in Chicago, several of these fine exhibits should be on display there!

[@Hat_Uncle]

JB Weld dissolves in petroleum, like gasoline and oil. LOL

[@maksimperepelitza6289]

A hedgehog or porcupine exhaust system is definitely a must have on Mad Max cars.

[@TheStuffMade]

Some of those exhaust welds 😲 did they try to weld without gas but not using flux core wire?

[@1pcfred]

Some of it looked that way.

[@CamiloSantana]

I always thought I was an adequate welder... but compared to these guys, I am god!

[@gkindustrialmachine1]

$150 Harbor freight wire feed welder ... everyone thinks they can weld now.

[@Silverhornet81]

I bought one of those about 8 years ago, I had never welded anything prior. My first welds looked professional compared to those lol

[@gkindustrialmachine1]

@@Silverhornet81 yeah, those are in a different class... wire feed to high I think

[@1pcfred]

Step 1 of welding is get a welder. There's a couple other steps too though.

[@1pcfred]

@@gkindustrialmachine1 bad ground, too far stick out, too low setting, stop and go, no prep, etc. etc. Basically everything you can do wrong they did wrong.

[@Silverhornet81]

Maybe whoever does those welds learned by watching those "cold weld" videos? So many questions though. How long did that take them? At any point did any of them say "these welds dont look like other welds i've seen"? Youd have to get the wire stuck and cut it off after every hit. I would get aggravated after the wire sticks ONCE.. those have to be 100s or 1000s of times.

[@Wbfuhn]

I tried using JB weld on a hole where the transmission oil line goes on a 2 core radiator. I put enough to fill the gap on the threads of the line. Waited a day and then started the vehicle only for transmission fluid to leak out through the gap. My solution that worked was wrapping plumbers fuel grade tape over the threads and then thread it in. No leaks and it held. I sold the vehicle with the parts that came with the vehicle.

[@bluesmoke8714]

the trick to getting a seal with jb weld, is you must clean the surfaces before you weld, Gunk Dunk Degreaser works best.

[@bigdatapimp]

The welding seen here, makes my sh t welds look downright beautiful...😂

[@drumminggoose444]

I don’t claim to be the best welder but I think I can do better

[@1pcfred]

I've done some popcorn welds but at least mine flowed together.

[@sachadee.6104]

I think secretly a lot of viewers are mediocre welders hoping to see very bad welds to feel better about their own work. (I do)😉

[@BobPagani]

Every video on this channel makes me laugh out loud at least once.

[@LegendaryFenrir]

These people need to find better "friends" that actually know how to weld 😂

[@soaringvulture]

People that know how to weld charge money for it. That puts a stop to things right there.

[@Matthew_Removeafterwashing]

​@@soaringvulturewhy would someone even have a welder if he have no clue what a welding is?

[@rjskillz92]

Mary Bonham, who developed JB Weld with her husband in the 1960s in Sulphur Springs, Texas, recently passed away. RIP to an icon.

[@jaxxonbalboa3243]

I'm a self taught welder but even when I had no clue what I was doing my welds were pretty compared to the chaos I saw here. I wouldn't even know how these welds were done.

[@1pcfred]

I have a fair idea of what they were doing wrong to get that result. They just never formed a puddle and ran a bead. So there was no fusion taking place. They just kept sticking snot balls to the work. Basically a lot of weld splatter. Weld splatter isn't welding.

[@dont-want-no-wrench]

@@1pcfred oh, isnt it just like using a hot glue gun?

[@1pcfred]

@@dont-want-no-wrench welding isn't like gluing because the weld bead melts the parent material. Everything turning into liquid presents some unique challenges.

[@markedwards4879]

It amazes me that people who can do these things can hold down a normal job.

[@deepinmind83]

The fuel line?! The F***ING FUEL LINE?!?!?!