Kärcher Window Vac Repair / How to Open / Karcher Battery Replacement

[@CMCdiy]

Here you can see the products which i used in this video Lithium battery 18650 s.click.aliexpress.com/e/DYGUf6ne Battery Charger Module With Protection Dual Functions s.click.aliexpress.com/e/_DE7...

[@barbsaddison6000]

Brilliant video of how to replace the battery in the Karcher. Thank you very much for your help!

[@rickdeheide2127]

Thanks so much. It worked in 10 seconds, after struggling for over an hour first. Keep up the good work

[@CMCdiy]

Thank you. If you like my channel, please Like ,Subscribe and Share if possible🤗😉

[@briancandler4024]

Fantasic video, many thanks! My WV2 died completely but now running as new. I used a Samsung 25R 18650 (2500mAh) Li ion battery with solder tags from battery101. The tags needed trimming slightly to fit into the slots.

[@CMCdiy]

hi. I'm glad you managed to fix it. The Samsung 25R 18650 battery is very good It's a sin to throw away items that you can restore.

[@ianwhitelaw921]

Great information thanks so much

[@22tomthebomb]

Another brilliant video. I like how you direct us to the replacent parts as well. What size screw driver to take out screws please?

[@anthonygatfield6416]

T8 Torx. A long 100mm bit will be fine.

[@gerigesquiere66]

Fantastic. A great help ! Many thanks.

[@EricCoates-l2k]

Can a faulty switch be replaced

[@shyraman7862]

Hello! Can you tell me where the + and minus charging sockets are, I want to use another charger, because the original one was lost

[@debbiestringer9335]

Tried this fix but couldn’t get the battery soldered correctly. Would you consider doing a fix service? Already bought the new battery.

[@stuarty23]

Hi, great video. I took my vac apart and there seems to be a green lubricant/gel type substance around the seals and on the PCB. Is this normal do you know?

[@Алексей-ф3ш4ь]

похоже окислы . отмой их и просуши

[@72armania]

@@Алексей-ф3ш4ь здравствуйте, аккумулятор 18650 подойдёт для замены?

[@Mario14792]

The new battery that you install, is more powerful, lasts longer? Do you know if this possibility exists? A battery that lasts much longer than the original one that does not last at all charged, I await your answer, greetings.

[@jaimematosmontano6999]

Que destornillador usa para quitar los tornillos??

[@danilie6742]

Torx T9

[@dancosta2270]

I would like to know the name of the small engine

[@johnferguson9515]

Is that superglue? Water got inside mine and the fan keeps lifting, runs fine with no load but as soon as I reassemble it the same happens again. Thanks.

[@PeterWheeldon]

Excellent Video. Mine had a very stiff motor. Bit of light lube oil on the motor shaft with a few spins and it was back in business. Not sure how long for though as it appears moisture has found it's way inside.

[@Gaz888]

Spot on mine was a seized motor, quick spray of contact cleaner then silicone lube job done

[@electronic7979]

Nice repair video

[@CMCdiy]

thanks. I'm glad you're with me on every video

[@strollos123]

Not charging though is it?

[@EZflyer75]

I did repair my WV5. The flat flex cable was slightly damaged and corroded. Ordered a new one from Aliexpress.

[@moniquemorillon3920]

Quel tournevis pour pouvoir démonter? Merci

[@DominikZsille]

how to connect TP4056 with ON/OFF button?

[@holidayfootprints4151]

Mine is a mains charger but not working ...does it need battery changing ?

[@caparn100]

Is it a 18650 battery with tabs?

[@CMCdiy]

yes it is 18650

[@caparn100]

@@CMCdiy thanks

[@hiddenhorsham]

Hi, great video and I am just about to order a new battery. I could not see on the battery you removed that it had solder tags but the new one does. So do I need to buy a battery with solder tags? I love being able to fix things like this :)

[@CMCdiy]

yes you need to buy a battery with solder tags' Thanks for watching my video

[@peterbotherway9399]

Go to the end of the video for the quick fix first. A bit of 4mm conduit wire works a treat

[@moniquemorillon3920]

quel genre de tournevis utilisez vous pour démonter l'appareil, sachant qu'un plat ou cruciforme ne conviennent pas. Merci

[@anthonygreen8754]

Le tournevis est un Torx T8

[@roydavidson3685]

My sprayer unit has a blocked nozzle. How can I clear it?

[@inokentiy_potapuch]

Thanks!Like such videos, when somebody saves me my device)Cant understand how dissassemble this black bottom thing)

[@johnferguson9515]

Use a screwdriver to prise out the black just above the charging socket, you will unclip it. then you have to so the same at each side, closer to the back. slide a screwdriver in and wiggle towards the back.

[@peterwest4996]

what all these videos forget / don't show is all the gunk you encounter when taking them apart

[@ssalahed]

Thanks man

[@CMCdiy]

You're welcome!

[@paddyp.9720]

Awasome to the max. THX

[@passaroborboletas5734]

O meu eu preciso do motorzinho mais não consigo achar para comprar

[@vitalhygiene3546]

The battery doesn't come out you've pre done this. My battery is fixed to the metal contact and cannot come out without breaking the contacts and re soldering. This cannot be done the way your showing. I've tried it today.

[@loveyourfreetimenow3270]

Nice!

[@CMCdiy]

thank you very much for your support

[@loveyourfreetimenow3270]

@@CMCdiy You are a constant inspiration to me !

[@chrisday8038]

Great

[@CMCdiy]

Thanks a lot

[@VITALIITIGERv_10ro]

Hello! Nice video! Like from friend!!!)))

[@CMCdiy]

Thank you 🤗

[@marjoleinvanderveldt6078]

OMG not easy to complete take it ALL apart just to replace the battery!

[@ianfieldsend3812]

Ha so you have taken this apart and put a battery in that falls out when you take it bits, reassembled and then taken apart again and then replaced with rhe correct battery with fixed tabs...bit misleading

[@snawbadde2371]

Come on guys, 28500 views and only 247 likes?

[@Angeldust771]

Where can I buy a new battery? I am from Germany

[@CMCdiy]

hi in the description you will find a link where you can buy

[@Katinaspi]

😇😇😇