K110 blade tracking and equal distance between the blades in 3g mode

[@Dronesenelcielo]

I am a Spanish pilot in mode 2, by the way, thanks for your videos.

[@thonhorm3399]

Thk, Very useful fo beginer.

[@antoniofrance8]

Merci c’est très utile pour les beginer

[@helifan2346]

Glad that you found it useful

[@danialtun5431]

TQ Video. Xk110 2 blade setting XK 123 is 3 blade how to do Mr.

[@helifan2346]

Don’t know as I don’t have one But if you have same radio, play with servo ends and see if that make things better Or go to rcgroups scroll down to mini helicopters and you should see they have a subsection for that particular heli or create an account and ask questions there in that subsection, minihelis

[@danialtun5431]

@@helifan2346 xk 110- xk 123 same radio

[@Dronesenelcielo]

An excellent job, friend, you control it perfectly, that's why I ask you, I just received my K100, but it does not fly, the propellers are good, motors, servos etc, I can't calibrate it, could you help me, friend? Thank you very much for your answer. a hug, like! +

[@helifan2346]

Drones en el Cielo Hola, no sé nada de ese helicóptero No es lo mismo que el k110, usa diferente motor que con el tiempo se desgasta y ya no tiene la misma potencia, es muy dócil y lento, por lo que he leído. Te recomiendo comprar un K110, tiene un motor brushless y más potencia, lo puedes usar en 6g mode o 3g mode y hacerlo dócil a tu gusto Qué es lo que le pasa al tuyo? Las baterías son nuevas? Lo has chocado? Cuantas horas crees que lo has usado? El motor no dura mucho por eso pregunto, es desechable

[@Dronesenelcielo]

@@helifan2346 Hola, compañero, yo tengo un canal de drones y elicópteros, no entiendo mucho, los drones los arreglo de arriba abajo, los monto etc. me lo mandó Banggood para hacer la revisión, no los compro, por eso era tan importante para mí. Es una review que les debo, pero no se eleva, el sistema es el mismo a nivel de mecanismo en el k110 que en el k100, llevo unos años en esto, pero ahí estoy pillado, el tema es que el vuelo es para la review únicamente, puedes pasar a mi canal y verás que no soy de helicópteros y trabajo haciendo reviews con las casas, si me prestas un poco de tiempo, te ayudo en lo que me pidas, un saludo amigo, escribí a much@s canales potentes, el caso es que ya empecé el video y me falta el vuelo para rematarlo, gracias, un abrazo amigo.

[@helifan2346]

Drones en el Cielo Ok, este video te ayudará en eso, síguelo a como le explico, inclusive si no entiendes inglés o si lo entiendes mejor. Checa que tengas las aspas parejas a medio stick.... Si me das tiempo te lo explico más tarde. Mi idea es que a lo mejor tienes pitch negativo, mucho, y por eso no se levanta a volar.... Si le das full throttle, el stick para darle energía al motor y que se eleve, se queda parado nada más? Como si quisiera pegarse al suelo y el motor se oye que que aumenta las revoluciones a como incrementas la velocidad? Muy importante, qué radio estás usando? El que viene con el heli o uno diferente? Si estás usando el que viene con el heli, le cambiaste algunos ajustes en el radio?

[@Dronesenelcielo]

@@helifan2346 Eso es lo que me pasa, Te agradezco un millón de veces tu respuesta, se queda pegado al suelo, llegué a pensar que era la batería que no llega a la tasa de 25c, ya que en la descripción viene una de 250 mah y la mía es de 100, pero debe ser la configuración del RC, si me ayudas cuanto antes, te mando un regalito desde Banggood.

[@Dronesenelcielo]

Muchas gracias por tu atención. Sigo mirando tutos, a ver si pillo algo, no dudes en contactarme si quieres que hagamos algo, muchas gracias amigo!

[@oded_10]

Very understandable video, I have a question? The 6G button rotates the blade down and up?

[@helifan2346]

Oded k I don’t get your question 6g mode, I don’t use it. If you switch between 3 and 6g mode the blade pitch would change as you don’t have same values in those modes therefore you will see that blades go up and down between modes, if that’s your question then, yes

[@oded_10]

@@helifan2346 yes 👌👍,Now I'm sure I understood the replacement, when the helicopter flew on its back.

[@rickydee5352]

Hi Heli Fan...may i ask what size are your tx stick tips (Rockers).....4mm?

[@helifan2346]

Ricky Dee hobbyking.com/en_us/alloy-anti-slip-tx-control-sticks-short-futaba-tx-blue.html?___store=en_us Not the same as mine are old, but they fit, Look it up on the web, Futaba gimbal sticks and extensions

[@rickydee5352]

Thank you Heli Fan....I'll check it out. :)

[@anmwolfrc159]

Check blade tracking, third value on your radio settings should be 50% on both, 3 and 6g mode don't understand

[@helifan2346]

abbie morris , I should be more specific, sorry about that. You have 5 values on pitch curves in your radio, the 3rd value is mid stick in your radio, that’s where you check for blade tracking, that value should be 50 on your pitch curve, that reading is half the travel of the servos on it’s full travel, 50%. Then, this heli fly in 6g and 3g mode, the 50% on your pitch curve in either flight mode should be 50. Some people use different percentage, different results. I don’t fly in 6g mode. Does this clears up your question?

[@anmwolfrc159]

Thank you so much can i use this for xk k120 as well have a bless life my friend

[@helifan2346]

abbie morris yes, you can use same procedure for K120 heli, same radio too. But I would not recommend you to get k120, look up for parts, they seem to be hard to find, specially the boom. If you know how to fly a heli and have all the orientations down and don’t crash that often, then get k120, but as I said before, look up for parts first in any heli that you want to get, seems to me that the manufacturer dropped production of this heli, first sign is stock parts, when there are not many available, that’s a bad sign. I invite to www.rcgroups.com/micro-helis-42/ forum to come and join us.

[@TheDigitalAura]

This is blade pitch, not tracking.

[@helifan2346]

DigitalAura This video was made for some one that didn't know how to set up this heli, it is what you want it to be, it's just a video, that's all. But the main reason of this video is blade tracking on this specific heli, if you think is something else, good! Hope it helps

[@jeanrochat]

This is blade pitch but good video. Blade tracking is height difference between blades while rotor is spinning, leading to blades not being on same plan = vibrations. Usually it’s adjustable by links but not on K110 which have grips to swachplate fixed length plastic links.