K24 swapped insight

  Рет қаралды 943

Not A Mechanic

Not A Mechanic

Күн бұрын

Just a brief update in the insight with some new upgrades.

Пікірлер: 20
@djtraintxk
@djtraintxk 4 жыл бұрын
I need to know everything about this build
@streetkingspnw
@streetkingspnw 5 жыл бұрын
Hey I just acquired a 01 silver manual insight. And have my k20z3 full swap out of my old 06 civic si. I have original engine harness and ecu and also have a 02-04 rsx engine harness and kpro. I’m lost on wiring for engine harness to connect to dash and lost on what axles to get. If you could help out that would be amazing!!!
@SwS_Motorsports
@SwS_Motorsports 5 жыл бұрын
Join k swaped insights on FB. I have diagrams and manuals on there. Tons of resources
@mrhyspeed8769
@mrhyspeed8769 5 жыл бұрын
Aayyyyeee another KILLsight build!!!
@marshallcox134
@marshallcox134 4 жыл бұрын
The goat!
@RobotHouse888
@RobotHouse888 5 жыл бұрын
Is that a Prius? Lol love you bro. Still looks great.
@cnrdlynch
@cnrdlynch 4 жыл бұрын
Is it possible to run a factory k20 fuel rail with the factory insight fuel lines? Or do you have to buy an aftermarket fuel rail and pressure regulator?
@SwS_Motorsports
@SwS_Motorsports 4 жыл бұрын
Depends on which insight. Autos use a returnless system, just switch to a fuel pump from a tsx, and it's a bolt in. The manual transmission insights use a return style fuel system in which case you can use an aftermarket fuel pressure regulator with the stock k series rail . Just place a T between the pump and regulator. Its what I did for almost 2 years.
@latenttweet
@latenttweet 4 жыл бұрын
Is it for sale
@itsjussjerry
@itsjussjerry 4 жыл бұрын
Custom AC lines?
@SwS_Motorsports
@SwS_Motorsports 4 жыл бұрын
Only 1, and it was extended 2" and the fitting rotated ~90°
@kirby408
@kirby408 5 жыл бұрын
Is that upper strut bar homemade?
@SwS_Motorsports
@SwS_Motorsports 5 жыл бұрын
Nope, factory, but ya, it definitely looks that way lol
@kirby408
@kirby408 5 жыл бұрын
Cant seem to find one for mine
@SwS_Motorsports
@SwS_Motorsports 5 жыл бұрын
@@kirby408 To my knowledge there is not a single company who makes strut tower braces for the 1st Gen. Honda insight
@kirby408
@kirby408 5 жыл бұрын
Yea i have to get one fabricated
@AmericanLandscapeRestoration
@AmericanLandscapeRestoration 11 ай бұрын
What Mounts did you use?!?!?!
@SwS_Motorsports
@SwS_Motorsports 11 ай бұрын
I used innovative motorsports, but I had to cut them up and re make them because they fit like shit. Hasport makes a nice set that fits MUCH better
@AmericanLandscapeRestoration
@AmericanLandscapeRestoration 6 ай бұрын
@@SwS_Motorsports I just looked doesnt seem like Hasport sells them anymore :(
@SwS_Motorsports
@SwS_Motorsports 6 ай бұрын
@@AmericanLandscapeRestoration that is heartbreaking. For the right price, I could design some and make them for you😅
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
Idle Hands & A Tormek!
29:57
This Old Tony
Рет қаралды 287 М.
Dropped A Valve At 4000HP
17:02
Tom Bailey
Рет қаралды 76 М.
SwS Q&A
15:10
Not A Mechanic
Рет қаралды 45
Brilliant DIY Bearing Puller from Recycled Gears - Genius Hack!
6:52
Inventive Mech DIY Lab
Рет қаралды 60