You do a really nice job of presentation--clear and concise!
@MORGANSMaintenance Жыл бұрын
Thank you, I appreciate that 👍
@rickyrecon4067 ай бұрын
I have one. It was ever so slightly out on the line test. I loosened the hex screw on the base, flexed the rule, tightened the screw. Good and square after that. Good enough for woodworking. If you’re setting up tools, you should be using a machinists square anyway.
@MORGANSMaintenance7 ай бұрын
Mine was only slightly off also… and for what I am using it for is fine 👍
@B_COOPER19 күн бұрын
Big box store squares are always overflowing on the hangers at my local hardware store. Out of the im going to guess probably 30 of those empire aluminum try’s that were at the store, not one of them even had a straight rule! They all look like they’ve been sat on. Was disappointing because they had a nice weight and felt like it could be a diamond in the rough had they been accurate
@MORGANSMaintenance19 күн бұрын
@@B_COOPER you never know how people handle things in the shipping process from the manufacturer to the shelf they set it on. People just throw stuff around 😂
@kevinwhite2967 Жыл бұрын
This item was literally in my amazon cart and have been debating about it. Thabks for the vid!
@MORGANSMaintenance Жыл бұрын
👍… it was in my list for awhile for the same reason. Then my buddy showed up and handed me one.
@mawe76709 ай бұрын
I bought it as well, and it is perfectly square...
@MORGANSMaintenance9 ай бұрын
Mine was only slightly off… for what I use it for, it’s not a big issue for me. Appreciate you giving your feedback 👍👍
@brianhall9019 Жыл бұрын
Morning! Check out the Swanson Speed Square Pro (Lowe’s to see in person). It’s been redesigned to mark both sides. It won’t mark the entire long side of a stud, but still faster and more accurate than using the diamonds.
@MORGANSMaintenance Жыл бұрын
Will check it out… I never minded the diamonds till my eyes started getting bad 😂
@brianhall9019 Жыл бұрын
Nice quick video on Lowe’s website
@brianhall9019 Жыл бұрын
And I hear you on the eyes thing. 😂
@MORGANSMaintenance Жыл бұрын
I see what you mean on the Swanson and they make a small trim square which I prefer the size of. I think I’m going to go get one of those today. I really prefer speed squares anyways. You are right it won’t mark 100% the other side, but I’m good with that. I just like having something on both sides so that if I’m at a certain position on a ladder I’m not trying to get to the other side of the stud. I don’t normally frame walls and stand them up. I’m usually doing remodels where there isn’t room for that. I can also make the two marks, slide it, and then fully mark the other if I want to. 3 swipes, but no searching for the diamonds… I’ll take it 😂 Thanks for the suggestion 👍
@brianhall9019 Жыл бұрын
Sounds good my friend.
@1wirey4 ай бұрын
I bought this same square from Amazon and it’s as square as can be. For those that aren’t square, I’m wondering if loosening the hex nut in the corner will allow it to be calibrated?
@MORGANSMaintenance4 ай бұрын
I’m sure you can probably adjust it. Mine was close enough for what I wanted to use it for. That’s the downside to ordering tools like this online. You can check the bunch on the shelf and find you a good one
@tagsmyser4299 Жыл бұрын
try the Savage SVR149 by Swanson. It has what they call a "kickstand" that holds the square on the edge of a board. I picked one up at Lowes and its dead square. It probably won't stand up to the abuse your Milwaukee speed square will but its a good tool
@MORGANSMaintenance Жыл бұрын
👍. Thanks for the suggestion. I will see if my Lowes has it next time I go in there. I don’t remember seeing one.
@IslesPhan25 Жыл бұрын
LOL, I tried to warn you. From my perspective, it's either square or it isn't. I use my squares to not only mark lines but to spot check blades for square (miter saw/table saw). A square out of square only compounds issues elsewhere. As always, thanks for the honest review.
@MORGANSMaintenance Жыл бұрын
I know I didn’t buy it because of the feedback… my buddy who doesn’t watch my videos brought it to me and said he thought it looked like something I would like. I’m going to try cutting it down to 4” long and see if I shave the bottom of the ruler to square it and get to 1-1/2” wide…. Then it will be a layout only square. We will see.
@johnwidell8092 Жыл бұрын
I too prefer to layout both sides of the stud on the face of the plate. I have tried many squares but always come back to an aluminum Stanley framing square. The one side of the blade is exactly 1 1/2". The long blade allows me to mark 2- 2x6 or 2- 2x8 plates. Also the framing square let's me layout 2x12 rim joists. The only drawback is it doesn't fit in your tool apron so I carry a speed square in my apron. When laying out the framing square would never need to be in my a apron anyway. Nothing beats a high quality framing square on the job and knowing how to use it.
@MORGANSMaintenance Жыл бұрын
👍… I build a lot of walls in place in my work, no room to build and stand up. I have had too many times where I change directions and with only marking one side I end up putting a stud on the wrong side of the line somewhere. If I mark both, it helps that not happen. Appreciate your thoughts 👍👍
@joilsondejesus288911 ай бұрын
Do you still have it? Is it really good? The durability? I'm researching a Square to buy I found this model, I'm researching, to see if it's worth it, because it's expensive 😅, I want to use it in marble works, if you can tell me your experience with this square, thank you 🤝
@MORGANSMaintenance11 ай бұрын
I still have it, it’s not a bad square… except that it wasn’t square 😂 It wasn’t off much, just depends on what kind of precision work you do. I probably wouldn’t buy any square unless I could check it out in the store
@three-phase562 Жыл бұрын
Even certified items have a tolerance to them!! Might be good if you know someone with a milling machine, they could probably sort out the width and the squareness for you.
@MORGANSMaintenance Жыл бұрын
I’m going to go to Morgan’s Milling 😂😂.. it seems like the bottom of the ruler is the only part out. I’m going to try and shave down the thickness to 1-1/2” and see if I can true it up at the same time. Also cut down the ruler to about 4”
@Stefan_Kawalec Жыл бұрын
It's like with any door. Either closed or opened. There are no inbetween values. Square or not. Sometimes I buy a really cheap (and I mean really) combination square and square it myself. Usually they have a ruler part made of steel and a "handle" part made of low grade aluminium. So I just shave the handle square on a mitre saw. Usually you need to remove like 0,1 - 0,2 mm (whatever it is in bananas). It takes me about 10 minutes to set up the saw, cut it and then clean. Because a really cheap combi square goes for $6, a really good one goes for $40-100 (I'm talking to you Starrett), doing so is worth my time. And given that squares wear out over time, I prefer it that way. But when it comes to any other squares, they have to be dead accurate. I pay and and I demand accuracy.
@MORGANSMaintenance Жыл бұрын
Yeah I think I’m going to try shaving this one down to 3 1/2” in length and also try squaring it up and getting it to 1-1/2” wide. It seems like it’s only the one side of the ruler that has something out. Those numbers mean nothing to you… 😂😂. But that will work for 2x4 framing for me, which is what I wanted to use this for.
@Stefan_Kawalec Жыл бұрын
@@MORGANSMaintenance When it comes to imperial measurement it's ok, until it goes down to 15/16 or 33/64. Then it's bananas. Not to mention that 2x4 is 1-1/2 x 3-1/2... I know - before milling, after milling and all that stuff, but it's crazy impractical. I always give an example of an American down-to-earth approach towards reality with door handles. In Europe we have a keyhole below the door handle, you have it above. Now imagine trying to open an European door with a key when drunk... That's why I appreciate your solution. And all of sudden there's that imperial measurement shit. Yeah, using some steel cutting saw blade you can make it right and square easily.
@MORGANSMaintenance Жыл бұрын
@@Stefan_Kawalec give it to the ole USA to come up with drunk solutions 😂
@TruckGuyHD92 Жыл бұрын
So I seen a video a while back about this issue with squares like that. In video they talked about taking center punch and punching outside corner to push square in and punching inside corner to plush square out. I know if this will help in this situation. Video was on the 1 pieces large squares (24" I think).
@MORGANSMaintenance Жыл бұрын
I hadn’t ever heard that. This one seems like it is only out on the inside and not the outside… which to me almost means the ruler is not cut correctly. You would think it would be out both ways if it was an “out of square” issue. I’m going to try to shave that side down straight and get to the 1-1/2 at the same time. I’m going to look up what you are talking about though… it would be a good thing to know.
@TruckGuyHD92 Жыл бұрын
@@MORGANSMaintenance kzbin.info/www/bejne/d3zVo4FjbZWCeZI not the same video but same concept. But it might be worth trying before physically machining
@MORGANSMaintenance Жыл бұрын
@@TruckGuyHD92 👍
@donaldjeffries6244 Жыл бұрын
That upper capscrew looks like it may be intended to be used to calibrate for squareness? Why else have a screw instead of a pin?
@brianhall9019 Жыл бұрын
No need, it’s ‘CERTIFIED 90’…😂😂😂
@MORGANSMaintenance Жыл бұрын
😂
@MORGANSMaintenance Жыл бұрын
This one seems to be square on the top of the ruler and not the bottom. I’m going to try shaving the bottom down to 1-1/2” wide and see if I can knock at two things at once
@brianhall9019 Жыл бұрын
@@MORGANSMaintenance try that hex screw first…does it allow for adjustment? I know you want 1 1/2”…but might only need 1 side to adjust.
@MORGANSMaintenance Жыл бұрын
@@brianhall9019 I will see next time I get in the garage… I’ve had “rush” work this weekend
@Michael-kf6bc Жыл бұрын
If you are using it for framing ppfffttttt. a 32nd of an inch means absolutely nothing
@MORGANSMaintenance Жыл бұрын
Yeah I agree, if it was 1-1/2” wide I would be using it for it…. I am probably going to cut it off at 3-1/2”, shave it down to 1-1/2”, and see if I can square it up at the same time. But that’s why I said that little bit off for me doesn’t matter… for some people it may, just depends on what you want to use it for.