Perfecting Sublimation Tumblers with the Go2Craft Auto Rotating Tumbler Press! Is it worth It to Get

[@redspartanred]

The reason the mug isn’t sublimating correctly is that the handle needs to be positioned against the black rubber knob, in the opposite direction. I've seen other KZbinrs make the same mistake, and once they adjusted the mug placement, their sublimations turned out perfectly. I hope this helps. By the way, that tumbler looks fantastic! I enjoy your videos-keep up the great work.

[@katrinasgracefulcreations3711]

Yeah someone else mentioned that as well. I put it in the groove. My bad. 😆

[@donzellcooper]

The Betty boop design looks beautiful. You did an amazing job and thanks for sharing.

[@katrinasgracefulcreations3711]

Thank you so much. Thanks for watching.

[@nahnisjourney1406]

I trim the extra paper evenly with the edge of my tumblers also. I don’t have an auto press, but I press my tumblers at 385 for 90 seconds, then turn and press for an extra 30 seconds. I knew your tumbler would be good at that temperature. You’ll get a perfect press every time. I’m so glad I finally figured out what works for me. Please Don’t dip a hot mug into cold or cool water because it could break. Use room temperature water. Next time, after taping, put pressure on the tape on the bottom of the tumbler by pressing it on the table, making sure to press out those ghostly air pockets. I know you’re tired of getting the ghosting spots on your beautiful tumblers. Good Taping is the key. I used to hate taping tumblers before I figured out that I needed to trim away the excess paper at the top and bottom of my tumblers, and to press the air pockets out from between the paper and the tumbler. Now, it doesn’t bother me at all. I use the gold stretchy tape and pull it tightly around the top and bottle of the tumbler, and down the seam with my fingernail or a spoon. 🥄 whatever works best. Lastly, I don’t use my heat resistant gloves because I twist the butcher paper at the end of tumbler, making sure to use a piece of paper that’s long enough to create a handle for me to use to turn and remove the tumbler from my press. Then I place it on the silicone mat in front of a fan to quickly cool it down. Tuck the other end of butcher paper into the open end of the tumbler so that it doesn’t slip out of the butcher paper when you remove it from the press. You should be able to ease your tumbler down into the auto press without dropping it, and safely remove it. I accidentally learned that one. 😂 You have taught me and so many others SO much about crafting. Thank you! 🙏🏽 I hope you will try my tips. Best wishes!!! 23:01

[@cynthiaflowers9687]

Great job I enjoy watching you.

[@donzellcooper]

Good afternoon Katrina. I’m glad you’re eye feeling better. Here watching.

[@katrinasgracefulcreations3711]

Thank you. Appreciate it 🙏🏽

[@kelli-baggettlewis8694]

Love it. I need the new heat tumbler

[@gamersroomauthority]

Hi where to get the designs is a specific app or page whit the specific size for each tumbler or mug thanks enjoy watching your videos

[@samanthawhite3500]

Absolutely gorgeous!

[@katrinasgracefulcreations3711]

Thank you! 😊

[@rhondathomas6773]

Hello Katrina, I have this tumbler press, I love it, I haven’t done any mugs inside it yet. I love your Betty Boop Tumbler.

[@katrinasgracefulcreations3711]

Thank you. Yeah I’m thinking it’s a no for mugs

[@rhondathomas6773]

@@katrinasgracefulcreations3711 I use my Htv tumbler press and Cricut mug press. I do 3mugs at once. I haven’t had any issues. I’m still learning From You, Delonda, Patrice. Other crafters. Y’all Are Awesome. Have a Wonderful Day.

[@TheReneex]

I love Betty Boop and the process is quite impressive!

[@judibbb]

That is so beautiful now I may have a new hobby for the past two years it's been diamond paintings .

[@katrinasgracefulcreations3711]

I keep hearing about that

[@niqa2000]

Love the video. I'm thinking about getting one even though I don't really need it. I'm thinking 🤔. And yes Brooklyn in the house. I'm from Brooklyn too born and raised. Lived just about all parts of Brooklyn. I love me Brooklyn. I want to leave but I can't.

[@pauletteryans7150]

Brooklyn girl! Push the to the other side.

[@georgeb9651]

I like how you unbox and then demonstrate

[@katrinasgracefulcreations3711]

Thank you so much. I hate when people unbox and don’t demonstrate

[@lorettastreet1192]

Beautiful I like it!!

[@jessiegibson9023]

Good video thanks tumblr looks good ❤

[@katrinasgracefulcreations3711]

Thank you!

[@ladyMizellcre8tionzs]

Hello Katrina, although I don’t have that tumbler press I do have 2 others and I tried a mug in the tumbler press to see how it would come out but before I did I ordered silicone wraps from Amazon they come 3 to a pack and are 3 different sizes it helps to make the mug tighter in the tumbler press. I used that and the mug came out perfect. The name of the product is SUBLIMATION TUMBLERS WRAP FOR CRICUT MUG PRESS. Purchased from Amazon. I did use it in my Cricut tumbler press but have not tested it out in my other 2 tumbler presses yet. I hope that helps you. The tumbler was 🔥 girl I love me some Betty boop !!!

[@katrinasgracefulcreations3711]

I actually have some silicone mug wraps I have shown them in my channel before. Thanks. I was told I placed the handle in the wrong position

[@ShawnaFarnese]

Would you use this for large orders? Also love your vibe!

[@katrinasgracefulcreations3711]

I use my big oven for large orders. I have a video showing that

[@KWANTlZE]

is this better than my heater oven ???

[@djrobertwheeler7300]

I was just looking at that

[@katrinasgracefulcreations3711]

Right on time. For you

[@la-vieborde2496]

Very nice

[@katrinasgracefulcreations3711]

Thank you

[@juan2617]

Hey Katrina, hope that everything is well. Love all the contacts that you’re content that you’re doing and stuff like that Katrina when you’ve embroidered on your 3 machines for your 2 head and then one head machine have you done camping bag and if so, what is the biggest amount that you’ve done so far as far as quantity and how much you charge for a candle size curiosity I have 100 canvas bag that I’m doing for the master of the blind and I’m doing the design one in the back at 7 inches in the two pockets 4 inches eat

[@katrinasgracefulcreations3711]

Sorry I haven’t done camping bags yet just measure the space where you want to embroider

[@juan2617]

Have you done tote bags with pockets?

[@katrinasgracefulcreations3711]

No

[@deborahm7121]

I want to purchase this tumbler press but I watched different videos and the mugs and frosted mugs did not sublimate. Correct settings and all but the mugs on this machine don’t turn out right. I’m sure it will turn out as you continue to use the press great job on the tumbler I love!

[@MakingwithMarilyn]

I LOVE how the Betty Boop tumbler turned out.

[@katrinasgracefulcreations3711]

Thank you

[@preciouspeaces]

TFS

[@RachaelStevens-o7m]

Did you let the machine heat up for the mug before you put it in

[@katrinasgracefulcreations3711]

The machine was heated. I just did the tumbler handle was in the wrong spot…weird.

[@DianaPerez-dn3wj]

Brooklyn grip! 😂😂

[@nahnisjourney1406]

Hey, Katrina!!!😊

[@katrinasgracefulcreations3711]

Hey hey 👋🏽

[@Kelli_D.]

The coffee mugs handle has to be up against the black tab on the side of the opening. I did a mug using the sheet that came with the machine sublimated perfectly. I hate youtube, but it doesn't let us post images on our comments

[@petrag.4092]

❤❤❤

[@emilianozapata7690]

@katrinasgracefulcreations If I buy this Go2Craft Auto Rotating Tumbler Press, can I use a regular epson printer to printout the sheets to apply to the tumblers. . . or do I need to get a sublimation printer??? Maybe you have already covered this in a prior video???

[@katrinasgracefulcreations3711]

Yes I have sublimation please refer to any sublimation video or my epson video. You can only use sublimation ink for sublimation

[@LanceMcGrew]

Another $300 toy? Probably need to put a scrap mug on bottom and your fresh mug stacked on top so the heat clamp closes more evenly (parallel). Otherwise the clamping pressure is uneven.

[@katrinasgracefulcreations3711]

I was told I put the handle on the wrong side.

[@la-vieborde2496]

That's a shame that the mug didn't sublimate. Tumbler chefs kiss

[@katrinasgracefulcreations3711]

Yeah not sure what happened….messed up my nice mug ugh