Flat Tire, rethreading my studs, and driving on a wrecked stock wheel in my Camaro

[@Standyourground21]

Oh my that face when she started the car priceless and so intoxicating. Finding a young women like this that likes cars this much is hard to find. ❤️❤️

[@hectorortiz8840]

You and Raquel that's gonna be a crazy collab.. yall both love yalls cammed Camaros

[@KaylaRundle]

I am so excited!! Stay Tuned

[@J1Z06]

Between Your car and Raquel's with those cams!!!! both cars sound so awesome! it's awesome seeing You smiling,giggling,glowing! I get it! continue to enjoy!

[@jb6574]

Love the excitement and enthusiasm you have when it comes to your car

[@GQNissanPatrol_TD42]

Hi Kayla! Another amazing video! That little tool you were using to rethread the studs is called a die. A die is used to make eternal threads (male threads), such as bolts and studs. There is another tool called a tap which is used to create internal threads (female threads), such as nuts, inserts or lug nuts used to hold your wheels. Great job by the way Kayla! Please keep up the amazing work! Regards George

[@tonyfierro8642]

Them eyes bluer than california skies baby

[@gmpny3945]

Love your down to earth videos of the joy of owning an American muscle car.

[@KaylaRundle]

Nothing better!!

[@paulm417]

You and this car have been through some serious shit together. I applaud the both of you.

[@johnnyjayy14]

That little thread cleaner looks helpful, never knew there was such thing for that, now I know in case I need to rethread mine

[@victorwilburn3498]

Kayla: Your irrepressible positive attitude is fantastic no matter the pitfalls. I watch your videos and many flashbacks pop in my head. Keep doing your thing and have fun with it.

[@KaylaRundle]

Thank you so much! It’s all you can do, just deal with it and move on

[@victorwilburn3498]

@@KaylaRundle Exactly right. Keep exploring what you want for your car. Along the way the experiences help you to decide what is worthwhile and what your glad is behind you. I am a Dodge guy now, but your Camaro is beautifully tuned and sorted so go smoke those tires every now and then and keep the videos coming. Never tire of your attitude and joy.

[@victorwilburn3498]

Kayla: IF your still running on pump gas, pick up some Lucas ethanol fuel treatment (green bottle) and run some next time you gas up. When/if your injectors get dirty/clogged, it will surge. Try it and I bet it will help clear the surge issue.

[@xdmderp]

So I'm old and have a 13 mustang GT and your young and drive Camaro SS and are quite beautiful I might add but the one thing I love that we both have in common is the HUGE smile our cars put on our face when we hear the sound of that v8 yr awesome and so is yr car drive safe but drive fast.

[@fourbuick]

Her grandma was so sweet!

[@racingguitars]

I just love watching your joy when driving your Camaro !!! I have a 5th gen v6... so I'm a bit jealous of that cammed sound you get !!!🤣

[@Carl_Jr]

I almost felt like I should leave the room so you could have a moment alone. 🤣 👍

[@KaylaRundle]

Yes honestly 😂😂

[@CR3j35_90kid]

Definitely have a new subscriber, love the passion you have for the maro. Love that chop chop too never gets old.

[@scottadkins918]

I really like that butterscotch color. It fits you great.

[@chelsealynn_18]

I can’t wait to see you girly! Super excited for next weekend!

[@KaylaRundle]

I’m sooooo excited!!!

[@sandraherdman3783]

I hate to tell you Kayla,, that aluminum is from your rim,s,,I think you may need longer wheel lugs "lug nuts",,the rim isn't tight against the rotors. Love your videos your so happy all the time

[@Nick.Barnes]

its so awesome to see the pure joy come over you as you started backing out your car, totally been there before, its the best feeling! I'm curious to see how the machine shop is fixing your wheel, hopefully they explain it. have fun on the trip to florida, looking forward to seeing you and Raquel make some content!

[@KaylaRundle]

Thank You so much! I love this car to death, it keeps me going. I'm excited for the collab, stay tuned!!

[@thefitnesslife4988]

Yeah that first drive after not driving for weeks, id be just as excited.

[@Grandamse1]

Hiding from the cop. Love it! 😂 Very loud color. 😆 Had no idea there was a thread chasing tool. Impressive. 👌

[@KaylaRundle]

Thank You! If it works, it works!

[@beeweezee71888]

Phenomenal work keep it up Kayla!

[@AZMTB]

For what it’s worth, studs are like $4 a piece at the dealership. The screenshot you included was for an entire new hub with bearings, hub flange, and the studs which is way overkill. Sucks about the HRE’s getting messed up, they’re awesome!

[@cobra454tim]

At the least Id get fresh lugs IDK...lol you cracked me when you started driving the Camaro that happened to my buddy and his Chevelle when we got it running again with a solid roller cam engine carb that will rev to 7800 !

[@JR007x]

you're my new favorite car channel! i wish my '18 5.0 could meet your amazing SS!

[@KaylaRundle]

Awh thank You so much for watching!

[@ltstrong8368]

Pretty and charismatic... yep she's gonna do good on KZbin lol

[@lennartjohnzon6462]

Nothing beats cubic inches!👍

[@572camaroguy]

LOVE that cam and exhaust !!!

[@meto4604]

Great videos! Love the car. Keep in mind that you can get by running different size tires on the front of a rear wheel car (Camaro SS) but not on the back. 😎👍🏻

[@nicknocturnal652]

Great Fun 🤩 oh and loved the Cactus 🌵 gardens

[@KaylaRundle]

Arizona!!!

[@willygiesbrecht5032]

Kayla you’re amazing love the vids keep em coming

[@MrPdforeman]

Great video! Can't wait for the one with Raquel

[@jeremiahjackson4995]

Love your personality and car.you crack me up 😂😂😂😂😂👍👊✊😂😂

[@gesarge3]

FYI, if you want some serious power supercharge your Chevy Camaro with the Whipple 2.9 L Supercharger. Your car will really be a bad ass then and the guys will be jealous! By the way, your cam lobe sounds incredible!

[@swaller4504]

That sounds so good, I need to do that to my 2009 Impala SS

[@21bkier]

Underrated car

[@ReallyStrongGuy]

A thousand saved is a thousand earned. Great job of being creative and saving a ton of dough.

[@KaylaRundle]

Thank you so much! It works perfectly

[@tbacklun3403]

Dude, your set up is rad 🤘

[@KaylaRundle]

Thank you!

[@marcus330d]

Everytime you can lift up entire side of a car, when you place lifter on the front and lift so high (your lifter is able to do that) untill rear wheel will be also in the air

[@tre57production]

You could always put the Jack in from the rear of car. Great video I subscribed

[@jv3763]

1:19 that AMG Benz in the garage is 👌🏾 too

[@KaylaRundle]

Dangggg you see my secret cars - good eye

[@clarencelawhorn8745]

Good job smart lady keep up the good work love the SS

[@1bad69xss4]

Booger in Nose at 16:15. Sorry I had to. :)) I love your channel. You and your car are awesome!!

[@KaylaRundle]

I know I noticed 🤣 keeping y’all intrigued. Thank you!!

[@1bad69xss4]

@@KaylaRundle 😂🤣 Glad I found your channel. You’re very strong, intelligent, beautiful lady!! Keep up the hard work!! The car is so badass!! Love how mom joins in and encourages everything!❤️❤️

[@blegi1245]

Can we get a tour of the 4runner?

[@tonybastien3692]

Like your video Kayla and the car sounds great.

[@KaylaRundle]

Thank You for watching!

[@paulalvarado5596]

You can also use a wire brush to wire brush the access of threads.

[@marianogalvan3619]

I have 2010 Camaro ss (Ls3). Planning on getting kooks headers. Are they worth the purchase? or should I get other headers. Also how much hp gain after the headers install

[@KaylaRundle]

LOVE Kooks Headers!! Check my other videos for Dyno Sheet results

[@davequige5732]

Safety may not be a concern to you?? But the amount of threads on your lug nuts is very important especially when you have more then the manufactures horsepower rating. The lug nuts will back off in time without full thread engagement.

[@cobra454tim]

What about using the Oem jack that came with the car, I know they suck but most are really small and short .

[@terryreimund9611]

SS camaro doesn't come with a jack. Or a spare!

[@ivanmarkovicxxx]

Lots of people enjoy their cars as much as you, but probably fewer girls feel that way. But hey, good for you! I still feel Gen2 F-bodies look best & handle great...but haven't driven a 5th gen yet to compare (please invite me to drive yours...lol). I'd let you drive my 2nd gen bird...

[@rickmcrae8745]

Not sure if you got those small lift blocks that go under and bolt on the drip rails but you should get a set it would make jacking up a lot easier

[@KaylaRundle]

That would be a good investment. Thanks for the idea!

[@ave_kb1]

18:18 “Is that a camel”😂

[@FarisAlzubi]

Great video Kayla keep it up :)!

[@gesarge3]

Next time put wood blocks under the back tires. Reverse the car onto the wood blocks! Now your car is higher and there is now room for your floor jack! Info, you should also purchase jack pads from Amazon to install at the jack/weld points because the Chevy Camaro doesn’t have a frame. The jack pads will be fastened to your car and will remain attached to the weld point for you and other mechanics to use for jacks or car lifts! These jack pads will prevent undercarriage damage!

[@brucelangefeld6727]

My god....all of you together....oh boy 🤣🤣

[@spydaman2022]

Then drive the Camaro more…! You know you love it so much you can feel it inside… To hell with that four banger Ha Ha Ha … That's what your channel is supposed to be built on… Your Camaro

[@KaylaRundle]

I want to drive it more but it breaks on me to much, 4 banger is more reliable haha

[@jeffyjeff6916]

Watching this just reminded me that I missing a lug nut on my Rx8 😂😬

[@KaylaRundle]

Get that fixed ASAP, don't be in the same position as me

[@jeffyjeff6916]

@@KaylaRundle I did thanks for reminding me lol

[@kevinyost5635]

Where you happy to drive it again. How are you feeling. Do you think you will ever come to Idaho

[@jerrybowers2119]

Wire wheel on an electric or cordless drill clean off aluminum then chase threads with threaading die.

[@Dapowerranger]

Sounds soo good🔥

[@smokeybandit4910]

Wouldn't be a horrible Idea to put some beefy studs on it with the power you are making now plus the R triple eights and clutch drops. Lot of stress going to em.

[@Dealete420]

FYI... the studs press out of the hubs (and in) if you needed to replace them..... BUT you didn't need to do that..Good work!

[@turbo2ltr]

This. Studs are replaceable without replacing the whole hub. They even sell ARP ones.. www.summitracing.com/parts/arp-100-7736/year/2013/make/chevrolet/model/camaro

[@KaylaRundle]

Yes I did my research on this but I would still have to take the entire Hub out to replace the studs. So if I went that far, i'd want to replace it anyways since mine is so rusted. Luckily mine are fine for now, one day i'll replace the entire hubs and studs.

[@turbo2ltr]

@@KaylaRundle Well either way , like JD said, you got it done, quick and cheaply too! Nice work!

[@bigdogstreetperformance6761]

6:17 Don't mess with the mom! She is violent!

[@egrayy9500]

I made sure i watched all of your ads (as much as it hurt)

[@KaylaRundle]

You’re a legend thank you 😂

[@superchevy8844]

Man I love 5th gen Camaro’s but at the same time want a 4th gen

[@jerrybowers2119]

Use automatic transmission fluid thread cutting oil or WD40 to lube die metal on metal bad.

[@MatthewRunaway]

Hey! Great channel! What brand is the spoiler you have on the car?

[@KaylaRundle]

Its the Street Fighter LA Spoiler- Use code KaylaRundle for 10% OFF

[@cliffharris322]

You have a nice car take good care of it

[@KaylaRundle]

Thank you! I try my best

[@cliffharris322]

@@KaylaRundle you doing a good job keep up the good work

[@rickmcrae8745]

What cam are you running..any vids on your cam install

[@KaylaRundle]

I get so many questions about the install... I have very few footage on that install but I could always try to piece it together

[@saggles1]

You are literally the best lol 😂

[@nsxplore]

Can you jack it up via the rear diff?

[@davidkoon2030]

beautiful car lv the videos

[@bbgcars]

YO GURL TURN THE WRENCH THE OPPOSITE WAY WHEN YOU TIGHTEN THE DIE..hehe other than that good work!

[@darrelltburksjr399]

Hey, what are your tire sizes? Front and Rear?

[@mcarlkv53]

Nice color....

[@HaloGTMaster94]

Cool 😎

[@gjrt7573]

Never mind why are using a harbor freight jack? Five cars?????

[@DS-ft6sd]

Beautiful girls that drive hot camaros gotta love it👌.kayla I think you where having a moment at the Starbucks drive thourgh.😉🤭

[@KaylaRundle]

I def have moments with this car haha

[@NorthEastLowrider4lyfe]

Who do y'all think would win in a quarter mile.... Kayla or Raquel 🤔

[@Nitroxdude]

Kayla your amazing.

[@arlocaduco]

Watching every Camaro KZbinr that has a SS cammed and loud makes me want to get it so bad and just leave the v6😂

[@KaylaRundle]

Time to join the real American muscle Side!! Got to hear that V8 CHOP

[@arlocaduco]

@@KaylaRundle yup! I need to join the LS or LT fam! and make my future SS or ZL1 CHOP and extremely loud but not too extreme don’t want to make the neighbors mad😂

[@gjrt7573]

At least it’s real when you use a harbor freight jack.

[@eddiewilson1161]

Should have put a wire wheel and put on a drill and clean all the aluminum residue off studs

[@DT0157]

You look better then my daughter Ivanaka

[@ratcamaro]

You didn't spell your daughter's name correctly.

[@yotagang3705]

Dt your first 3 years👌🏼 then it all went downhill

[@DT0157]

I wouldn’t be Donald if I didn’t misspell

[@carlfalt174]

Make sure you torque your wheels after 40 miles

[@scottbroussard9491]

You need to learn how to shop at Oriellys or autozone you can buy just the studs and not the whole hub assembly

[@marcoantoniocanabravadacos3592]

Você é lindaaaa!!! Eu também tenho um camaro 6.2 V8 2011. You are beautiful!!!

[@KaylaRundle]

Thank you so much!!

[@marcoantoniocanabravadacos3592]

You're welcome

[@ryanparker777]

Did your car come with the Ls3 and not the Lt1?

[@KaylaRundle]

It came with the LS3!

[@mkh3227]

Did Cordes Street tune your car or only Dyno tune it......really not so sure that you should have any cam surge

[@KaylaRundle]

They only Dyno Tuned it

[@johnnyjayy14]

Get some cutoffs so the car won’t be as loud so cops won’t get you, that’s probably why

[@ralphsmallblock4367]

Fuckan ay🤘 what a beast😎

[@donaldbitsinnie8088]

U thee car look good Chevy power 🔥

[@sharikkhan3911]

❤️

[@jmx3v324]

Ngl it be interesting watching ur vids

[@KaylaRundle]

Thank You so much for watching them!!

[@cobra454tim]

Did someone over Torque then?

[@chris91G]

Do you have a name for your Camaro? I know it's a funny question but I'm just curious! 😂🤣

[@KaylaRundle]

No I do not! I just call it ballsack or Maro

[@chris91G]

@@KaylaRundle Ballsack?! 😂🤣

[@thefitnesslife4988]

I had a cop pull me over because I had a tinted license plate cover over my plate. He couldn't get me for speeding or window tint and he still found something.

[@KaylaRundle]

They will literally go after modified cars for no reason... I don't understand

[@dylangoodrich4282]

Good ol die nut always saves the day

[@KaylaRundle]

Seriously such an amazing thing!!

[@NorthPoleRacing]

When I'm in AZ we'll have to collaborate on a photo & video shoot!

[@brainfulify]

Kinda confused about why people are telling you to buy new hubs. Couldn't you just replace the individual studs? They looked totally fine anyway, probably could have got away with just using a little flathead screwdriver to chip the aluminum out of the threads. The wheel looks completely fubared, though.

[@MrCyp200la]

What size cam did you get?