Large Butterfly Appliquer Using Mylar - By Kreative Kiwi

Get the design here:
www.kreativeki...
Please read the important information given below for using Mylar without any fuss or dramas.
I will show you how to make this beautiful butterfly using iridescent mylar sheets that will give it that beautiful shimmery look. It is made in 3 easy hoopings all in the hoop so no difficult lining up or guess work to do. Anyone of any level of machine embroidery experience can make this.
Tips for using mylar:
You might need to tighten you tension a little bit when stitching mylar. If your tension is too loose it your needle will catch in the thread and tangle as it stitches. I tweaked mine from 0 to +2.
Only place tape outside of the design area because the sticky will lift off the iridescent coating when you pull off the tape.
Take care when you remove your tape or you pull on it, not to tear it in unwanted places.
Where can you buy Mylar?
amazon.com sell it in a pack of 10 sheets - 18" x 30".
Please share my subscription link on your social media networks.
/ @kayscutz
SIMTHREAD DISCOUNT CODE
My embroidery thread is Simthread I use it in 99% of my stitch along videos and they have kindly given me this code for you to get a 5% discount on all their threads from their Amazon.com store. Valid until the 8th February 2021.
Sorry unfortunately the discount code given below wont work on Amazon.co.uk but I will have some for you soon.
Simthreads Amazon Store: amzn.to/38j2YHQ
Use code NLWUXFGG at the checkout. Enjoy!
MY SUPPLIES
My fabrics and batting (I use Vilene High Loft Volume Fleece 295) are from the Remnant House in the UK:
www.remnanthou...
I can’t live without my sharp stabby tool as I call it, is a clay sculpting tool. I bought it in my local craft shop. Amazon do sell them as part of a clay sculpting set but not individually.
All my other supplies are from Amazon including my large squizzors. They are actually aquarium precision pinch action scissors.
I use H2O gone FSL water soluble stabilizer or Brothread cut away stabilizer for my stitch outs.
Happy stitching!
Hoop sizes
4x4 inch - 100 x 100 mm
5x7 inch - 130 x 180 mm
6x10 inch - 160 x 260 mm
8x8 inch - 200 x 200 mm
8x10 inch - 200 x 260 mm
8x12 inch - 200 x 300 mm

[@TheGroats]

love love this butterfly. Great instruction as always!

[@KaysCutz]

Thank you, happy stitching. 😊

[@2847Katie]

Absolutely stunning!!

[@watchingfirs]

Very clearly presented. Thank you.

[@KaysCutz]

You are welcome! Thanks for watching.

[@DianeMcFarlaneim4bids]

better late then never just a great teacher and lover that accent and I am definately going to try this one thank you

[@KaysCutz]

Thank you pleased you found this helpful. Thanks for watching. Happy stitching

[@brendawootenporter]

I LOVE butterflies and this one is AWESOME!! I love your site as well. I may have enough courage to try using mylar after seeing this video! thanks

[@KaysCutz]

Thank you I am pleased this vid has given you the courage to try mylar. It isn't difficult and once you try it you will be hooked. Happy stitching

[@eileentutt5530]

I have used mylar before but never had anything as nice as that to use it on thanks you tips are always good

[@KaysCutz]

You're welcome pleased you enjoyed it. Happy stitching.

[@ginnyturcotte4385]

I have never used Mylar but I am going to give it a try. Another great video.l have learned so much from watching you.

[@KaysCutz]

You're welcome Ginny pleased you enjoyed it. I hope you give it a try. Happy stitching.

[@GooglingMom]

Beautiful! I have not worked with mylar, either. Thank you, Kay, for the extra info on this. Your videos give me the encouragement - and courage - to try something new. Thank you!

[@KaysCutz]

You must try it Margaret it so rewarding to make something special with something new. Happy stitching.

[@lietteleclair2606]

Love it thank you

[@tanyaellis5433]

I have just bought some Mylar only the clear to start with coz I really didnt know how to use it. However, thank you Kay because after watching your video I can try it now xx

[@KaysCutz]

Glad it was helpful to you! You will love it and then want to do more and more. The first step of growing confidence is always the hardest. Happy stitching.

[@maryanndunham4457]

Gorgeous butterfly, Kay. Love the effect the Mylar gives. I'm another who has never used Mylar. Thank you again for another fabulous SAL. Angel Huggers!!

[@KaysCutz]

Thanks Mary, mylar does give a lovely iridescent effect,.

[@gailhardock826]

Love the video and some really good tips on working with mylar - thank you Kay!

[@KaysCutz]

You are so welcome! Happy stitching.

[@judierenfrow8073]

I have several designs of yours. They all stitch out beautifully. Thank you for this mylar lesson. Beautiful.

[@KaysCutz]

Hi Judie, I am pleased this video helped you. This design isn't mine it is Heather Duff's, she is the owner of Kreative Kiwi. I will pass your comments on to her.

[@judierenfrow8073]

Kays Cutz Thank you for passing on my comments. And thank you again for the demonstration.

[@bettymalone8444]

Thank you...I enjoy all of your videos.....your videos have helped me so very much.

[@KaysCutz]

Hi Betty pleased you find them useful. Thanks for watching and happy stitching.

[@patdipietro1469]

Love the effect of the Mylar. This is definitely on my to do list. Thanks so much for all your SALs

[@KaysCutz]

You are welcome you must give it a try, Mylar is stunning especially when it glistens in the sun.

[@Jacelyn5440]

Thanks, Kay! I was going to ask where I might find the Mylar. Our craft and hobby shops here don't seem to carry it. I see you have answered it already! Thanks!

[@KaysCutz]

If you search for mylar or florists iridescent cellophane and put your country letters next to it EG: florists iridescent cellophane UK or florists iridescent cellophane US, you should find loads. I usually get mine on Amazon.

[@pamelasherman1314]

Beautiful. With your help, I think I can do this.

[@KaysCutz]

Sure you can do it, have a go you wont be disappointed with the results of your efforts, it isnt difficult honestly. Happy stitching.

[@22motherduck]

Can I use Mylar for all of your designs please I use a lot of your in the hoop projects

[@KaysCutz]

Hi Dorothy you can use mylar anywhere that there is quilting that would create a net over the top of it. If the quilting is too wide it wont work as it would tear over time. I hope this helps. Happy stitching.

[@MamaBirbRnW]

Thank you for your video. You're so adorable!

[@KaysCutz]

Awww thank you and thanks for watching. Happy stitching.

[@lesliepalenica4276]

Really like the effect with the mylar!!!!! Turned out beautiful. I do have a question about attaching the antenna's, how did you attach yours?

[@KaysCutz]

Hi Leslie thank you and thanks for watching. I used stitched them on from the back by hand.

[@lesliepalenica4276]

@@KaysCutz Thanks you for your quick reply !!!!!!!!!!

[@Peteskis]

Lovely work. I purchased a different design yesterday. I was looking to purchase this one but I cannot seem to find the coloured foil like "Mylar" anywhere. Any chance of a link please? Uk if possible

[@KaysCutz]

Hi Pete sure here is a link to Amazon.com as I am not sure where you are but if you are not in the US if you look on your Amazon and do a search irridencent cellophane it should come up. Happy stitching. www.amazon.com/s?k=irridecent+cellophane&ref=nb_sb_noss_2

[@privateinformation784]

Sew Creative!! Question: could we use Mylar on the back too for a more see through effect?

[@KaysCutz]

You can but make sure it is secured properly so that it doesnt scrunch up when the hoop drags over the machine. I like to make sure the tape sticks to the plastic of the hoop as it is more secure. Happy stitching

[@lamtony829]

Good idea design, l like it.

[@KaysCutz]

Thanks Iam pleased you like it.

[@awasney48]

Hi I love your videos they are so well explained ,could you please do one on the large fairy appliques or the Faith Angel.Thank you so much

[@KaysCutz]

Hi Angelique thanks for watching pleased you enjoy them. I will add your request to my list.

[@alisonheath7638]

Made by butterfly, delighted with how it turned out, how do you attach the pipe cleaners ?

[@KaysCutz]

I stitch mine on but you can use hot glue too if you wanted. Thanks for watching.

[@Pherine1]

Love the Mylar, I cant seem to find out where to buy it?

[@KaysCutz]

Gorgeous effect isnt it? I get mine from Amazon. Search Mylas and also iridecsent florists cellophane. Happy stitching.

[@janicejeffs3377]

Can u please show how to use scan n cut for precutting fabrics that were going to be using in our chosen design I have a brother scan n cut but it just sits in my room unused .....help .....

[@KaysCutz]

Hi Jancie, I am sorry I cant help you as I dont own a scan and cut. Very sorry, if I had one I would.

[@14bogota]

beautifull thanks!!

[@KaysCutz]

You're welcome thanks for watching.

[@remington6363]

A lot of steps but very beautiful . I will have to make this . Thank you

[@KaysCutz]

Apart from the sating stitching the rest goes really quickly. Do make it you wont regret it. Happy stitching.

[@faithnichols7466]

Hello Kay! Where did you purchase the Mylar? Thank you for the wonderful tutorial!

[@KaysCutz]

I can't remember where I got mine but Amazon sell it www.amazon.com/Mylar-Sheets-Sheet-Pack-Opal/dp/B00RGY30AU

[@faithnichols7466]

@@KaysCutz Thank you for the quick reply! Hope you have a wonderful Day!

[@KaysCutz]

Your're welcome. Happy stitching. Do put a pick on Kreative Kiwis Facebook group we would love to see your makes

[@alisonheath7638]

no worries, just read, you stitch them on

[@KaysCutz]

You can hot glue too but I prefer to stitch it on.

[@theresamg2012]

Beautiful!!!! Can I do this on a repositional hoop.? My machine is only 4x4. TIA. Have a good day.

[@KaysCutz]

Hi Theresa this butterfly is designed to be made in 3 hoopings rather than a repositional, so no it can't be done on a 4x4 repositional hoop as the wings each need a 5x7 hoop.

[@traceyfinch2615]

Do you ever use the magnetic hoops?

[@KaysCutz]

Hi Tracey, I do and I love it. Do you?

[@traceyfinch2615]

@@KaysCutz thank you for any my question. yes I have a few of them, just wasn’t sure if they are good for these type of embroidery

[@photographybyday]

Is the Mylar you used made for embroidery or is it just regular stuff you get at the store. Also, I have heard the design has to be made for mylar

[@KaysCutz]

Hi Delia. Thanks for watching. The regular stuff. Yes a design does have to be digitized for mylar and this one is. Stay safe and happy stitching.

[@lucycherry6311]

Hi can I ask what machine are you using x

[@KaysCutz]

Hi Lucy. I am using a Brother Innovis V3. Happy stitching.

[@sherrymaylee9714]

What do you do with all the excess WSS?

[@KaysCutz]

I recycle what I can I have made a video on how I go about it. I hope this help you recycle yours. kzbin.info/www/bejne/n2rPgolml6aVeM0

[@annadale4618]

Hi what sewing machine are you using please. X

[@KaysCutz]

Hi Anna I am not using a sewing machine, it's an embroidery machine. It is a Brother Innovis V3 with the 8x12 upgrade.

[@14bogota]

😍😍😍🙃

[@KaysCutz]

Pleased you enjoyed it.