DAYTIME BrightLites Ford Edge LED DRL Kit Installation-Unedited

Unedited version of the full installation of our DAYTIME BrightLites LED daytime running light kit. EDGE-2v3.

[@caseyalexander1705]

Thank you. Appears to be a straight forward install.

[@feariefearie9974]

nice product, fits in my 13 edge SEL nicely. lights look great, my right turn signal did not function but my left did. After I cut some zip ties I must have bumped something and now neither turn signals in my DRLs are functioning. I can live without them and will look into it at a better time, I must not have a good connection on some of the wires. Also started to hear clicking in my fuse box when I used the turn signal, when the turn signals worked on the DRLs. Used fuse #90, will switch it to #92 when I look at all that later

[@kc300c]

The most likely cause is that the turn signal trigger wire is not making a good connection to the vehicle turn signal wire. We stand by our products. Be sure to contact us on our website should this remedy not work for you. We will be sure to get you all fixed up.

[@feariefearie9974]

@@kc300c I was thinking that. thank you. my left turn signal is working again on its own, I'll look into the passenger signal

[@kc300c]

⁠Great. Let me know how it turns out or if you need any further assistance.

[@user-eq1ig4cg8v]

Hola, quería preguntarte porque al hacer la conexión de la Luz de giro parpadea como flasheo la luz Ambar, la luz blanca si funciona perfectamente

[@kc300c]

Please send us an email at [e-mail]. We can help you through this email.

[@mygt8a4re]

Have you would you ever consider just having the brighter white led's without the amber lights and without all the added wiring and connections and using the ford factory plug to power the bright white LEDs? A true plug and play for those that want to remain using the factory park lamp switch and not mess with any wiring? I would purchase RIGHT NOW. Thx

[@kc300c]

Hi Justin, You can easily disable the turn signal function by not connecting the turn signal trigger wires in our wire harness. Now the lights will only have the bright white LED DRL function. Our DRL LED lighting system requires too much power to just use the stock factory accent light plugs.

[@mygt8a4re]

@Dan Smith Thank you Dan. Appreciate the response!

[@alfredo042295]

I install it the same way and they work òk but the white ones keep blinking when I drive my car

[@alfredo042295]

This lights are blinking when I driving suppose to be like this or something wrong I install it the way you show in the video

[@kc300c]

No. The white LEDs should not blink. Please go to our DriveBright.com website and send us a message telling us about this problem and providing the name and email address from the original order.

[@alfredo042295]

I have this fog lights in my ford edge but after I install the led head lights the fog lights start blinking should I put resistors on the led head lights to resolve the probleme

[@kc300c]

Just need a little clarification, you have our Edge DRL Kit installed on your Edge. When you put in our new LED headlight replacement bulbs, our DRL lamps started to blink? Are the white or amber LEDs blinking? It may be easier to call or email me. Phone is 913-304-0720. Email is [e-mail]

[@pspaduzzi]

Where did you get the parking light? I see its an LED light? do you sell them?

[@Drpebble]

The headlight plug for the 2013 Taurus sho is different do you know what wire I'm supposed to tap?

[@kc300c]

Most people do not use the headlight dimming function. They choose to have the DRLs at full brightness at night. But if you want to use that dimming function, the white wire connects to the Brown/Blue wire in the headlight power wire harness located under and to the rear for the headlight housing.

[@Drpebble]

@@kc300c ok thank youre right I'm not gonna use the dimming function

[@clutch2827]

18:00 Doh!

[@OceanViewPR-b7i]

Where can I buy your product?

[@kc300c]

www.DriveBright.com

[@hadenlacavera2672]

My hazards work but not my blinkers any solutions?

[@kc300c]

Hi Haden, please send us an email at [e-mail]. We don't look at KZbin very often. Email will be much faster.

[@chemamtz4995]

Como puedo hacer una coneccion que ensiendan con los faros principales

[@kc300c]

the scene with the headlight connection is at 14 minutes, 36 seconds in the video

[@chemamtz4995]

Gracias ya ise esa instalación que solo prenden de dia, pero lo que busco es que las drl prendan de noche también con las luces principales bajas y quisiera saber si me pudiera a yudar con eso?

[@kc300c]

@@chemamtz4995 the wiring instructions that came with the DRL kit shows how to connect the headlight dimming wire, so the DRLs will dim when you turn on your headlights. If you have any other questions, please go to our support page on DriveBright.com and send us a message. It will be much more timely than going through KZbin messages.

[@brendanduke4797]

Fuse space for a 2013 Taurus sho?

[@kc300c]

#90 or #92

[@Drpebble]

Thank you I got it

[@jcason6295]

Why does my input/power side have a blue wire

[@kc300c]

That is the courtesy light trigger wire. It goes to the parking light power wire. (Should be the middle of the three wires going to your turn signal bulb in your headlight. This courtesy light wire allows our DRL lights to turn on and off with your key fob, just like the stock accent lights.

[@jcason6295]

@@kc300c Which fuse space do I use on a 2017 taurus limited

[@kc300c]

@@jcason6295 It is either fuse slot 90 or 92. Must be an ignition circuit that is only energized when the key is in the on position.

[@jcason6295]

@@kc300c Got it working thanks for all your help. I'll email you some pictures for the website

[@justincase1778]

Poor audio.