Do you have what it takes to get OSPF working???

  Рет қаралды 5,392

Keith Barker - The OG of IT

Keith Barker - The OG of IT

Күн бұрын

Пікірлер: 56
@abelardodiaz6276
@abelardodiaz6276 4 жыл бұрын
Thanks Keith, I used cbt nuggets and watched your youtube videos and streaming, I passed my ccna yesterday with high score. Regards from Peru
@KeithBarker
@KeithBarker 4 жыл бұрын
Congratulations Abelardo!!!
@morganscott5588
@morganscott5588 4 жыл бұрын
Thank you for all of the thought, time, and effort you put into creating these high quality challenging labs!!!
@KeithBarker
@KeithBarker 4 жыл бұрын
My pleasure Morgan!
@jjergo
@jjergo 5 ай бұрын
I did it also included some ip filtering with ACL and dns by name and ip helper for new computer on Vlan 20. Thank you Keith. You’re my inspiration man
@KeithBarker
@KeithBarker 4 ай бұрын
Thank you @jjergo!
@ibrahimbarrie4180
@ibrahimbarrie4180 4 жыл бұрын
Hello Keith. I did the Lab . it was Challenging but a good way to Test our Skills with the OSPF Concept. Some of IssueS with regards to the Lab were Namely: 1, The OSPF neighbour relationship were not formed due to Mismatched Hello -Interval , Ospf Network type. 2, Core Switches Routing not Enabled 3, After configured with correct wild card Mask ( 0.0.0.15) and (0.0..0.255) Ping was Successful to both Servers from PC1 Thank you Keith.
@KeithBarker
@KeithBarker 4 жыл бұрын
Thank you Ibrahim Barrie for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
@akyumurkov
@akyumurkov 4 жыл бұрын
I love that lab. Cool tricks to keep us sharp!
@KeithBarker
@KeithBarker 4 жыл бұрын
Thank you Alexander Kyumurkov for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
@sauvus
@sauvus 4 жыл бұрын
This lab was awesome and fun. Thanks Keith!!
@KeithBarker
@KeithBarker 4 жыл бұрын
Happy to do it, thanks for the feedback Caleb B.
@treygraham5854
@treygraham5854 Жыл бұрын
Keith! You kicked my behind with this one. Lots of great curveballs in there. Took me longer than I would have liked, and had to restart from scratch a couple times, but eventually got it done. This one really pushed me to learn and get outside my comfort zone, and for that I have to say thanks!! 😎
@KeithBarker
@KeithBarker Жыл бұрын
Thank you Trey Graham for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
@alexei4856
@alexei4856 4 жыл бұрын
Thank you Keith. Beautiful lab! Took me 1.5 hours to solve
@KeithBarker
@KeithBarker 4 жыл бұрын
Thank you Alexei for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
@joedavenport6156
@joedavenport6156 4 жыл бұрын
I'l accept your task... Thank Keith - We covered this in our class here in Burbank SOO. I think I can do this... :)
@KeithBarker
@KeithBarker 4 жыл бұрын
Thank you Joe Davenport for taking on this lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
@zosthegoatherd
@zosthegoatherd 2 жыл бұрын
I managed to get through this without too much trouble, though it took me a little bit longer than I would like. Planning on taking the CCNA in the next 2 weeks and I am trying to make sure that I don't let nerves trip me up by taking on as many troubleshooting labs as possible over the next few days...
@KeithBarker
@KeithBarker 2 жыл бұрын
Thank you zosthegoatherd! How did the exam go?
@zosthegoatherd
@zosthegoatherd 2 жыл бұрын
@@KeithBarker I ended up letting nerves get to me and didn't follow my plan for managing time... Didn't even even look at the paperwork, texted my wife that I had failed, then at home got very confused that it said 'Pass'...
@paullagatta3533
@paullagatta3533 4 жыл бұрын
Fantastic Lab - Loved it!
@KeithBarker
@KeithBarker 4 жыл бұрын
Glad you enjoyed it!
@richiemoreno7722
@richiemoreno7722 2 жыл бұрын
A little late to the party, but fantastic lab! Taking ccna this Feb 23, Ive been doing your labs and watching your quizzes the past month for extra practice.
@KeithBarker
@KeithBarker 2 жыл бұрын
Thank you Richie Moreno! Let me know how you did! Best wishes.
@austenskinner5451
@austenskinner5451 2 жыл бұрын
@Keith Barker Is there a video of you walking through the OSPF troubleshooting lab? if there is I can't find it.
@tango12341234
@tango12341234 4 жыл бұрын
Do you have a video that goes over the lab Keith?
@nonegiven
@nonegiven 4 жыл бұрын
Thanks Keith, I tried and failed yesterday but gave it another go this morning and solved it! I had to use show run a few times though and once I had seen an issue I then went and tried to find a correct show command to see if I could find the error in those. It was a toughy! Need to remind myself about vlans.
@KeithBarker
@KeithBarker 4 жыл бұрын
Thank you None Given for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
@prateektanwar1207
@prateektanwar1207 4 жыл бұрын
I am also struggling with the vlan as pc1 is not able to ping anywhere except for the core switches can you help please
@nonegiven
@nonegiven 4 жыл бұрын
@@prateektanwar1207 I can't remember but I would make sure every switch has the plans it needs along with access and trunk ports correctly set up. Possibly also routing? I might have another go later today.
@prateektanwar1207
@prateektanwar1207 4 жыл бұрын
@@nonegiven thanks man it's done I just kept on doing show run it came out the router didnt had any route to get back to the PC so had to add the routes for vlan interfaces thank you for helping :-)
@imcg
@imcg 4 жыл бұрын
Hi Keith, this took me a long time to do, but I did do it :) Very happy. I found drawing out the network map and writing in the IP's helped me focus on the ospf networks I needed. I did have a question regarding part 2. So for part 2, I simply put a 10.16.16.x IP on SW3 and a 10.16.8.x IP on SW2, pointed them to R3 and R2 respectively for their gateway. Is there an alternative that I could have done? Management IPs are always confusing for me, I don't know why.
@magonyamlo5497
@magonyamlo5497 4 жыл бұрын
great videos Keith,this is what I need to pass.THANKS A LOT.
@KeithBarker
@KeithBarker 4 жыл бұрын
You got this!
@swakaable
@swakaable 3 жыл бұрын
Hi Keith, Ollie here. I am trying out one of the ospf labs on your site, OSPF More Tshoot 202-07-17, and I was wondering if you had done a walk through for it? I can't locate in the playlist. Wanted to know what I am doing wrong.
@KeithBarker
@KeithBarker 3 жыл бұрын
Thank you Bob_Om. Feel free to join my Discord server. Lots of people there helping each other out. Each Saturday at 10am Pacific I hold my "Office Hour" where learners can ask questions about the topics they are studying. Mostly focusing on Cisco CCNA 200-301 topics. Feel free to join us there live if you are available. Here is the link ogit.online/Join_OGIT_on_Discord Thanks again Bob_Om!
@swakaable
@swakaable 3 жыл бұрын
@@KeithBarker Thanks Keith I did my exam 2 weeks ago, I passed Thanks to you and the CBT Nuggets team! I just wanted to get some career advice, I am being pulled in different directions. Cyber security, Devops, networking or system audit.
@Doschdj1
@Doschdj1 4 жыл бұрын
Hi Keith, Will you be making a video going through this lab?
@KeithBarker
@KeithBarker 4 жыл бұрын
Thank you for the question Daniel, I may. Did you attempt the lab, and if so do you have any specific questions?
@clxxcv4208
@clxxcv4208 4 жыл бұрын
@@KeithBarker I have some Trouble. With R3. he didnt want to Advertise any one else about his interfaces (10.16.16.0/24) i dont know why... he is in state of BDR, while R1 is a DR. I change the R1 Router-ID because they have the same... btw also Router 2 didnt want to receive from DR/BDR Routes (like he sitting alone with friends but talk with him no one... after few moments later (angry push the FORWARD Button in SImulation Mode) R2(DROTHER) take Routes by OSPF... i probabbly assume Cisco Packet Tracer doesnt work well with ospf. I had the same issue about from 3-to 5 times... everytime i reincarnate the OSPF topology by another way, always some Router dont want to Exchange his route (like a Golumn with little Precious... HELP! Pls. Im gonna take my CCNA in the next month. and OSPF look at me like im DROTHER. :) Also i watch your videos time to times. you doing Great. Thx 4 all what are have you done.
@clxxcv4208
@clxxcv4208 4 жыл бұрын
Everything alright, there is no trouble in cpt, just need it to reboot cpt. A little patient. Joined the discord server also.
@klausgrassmann8647
@klausgrassmann8647 3 жыл бұрын
it would be nice to have a walkthrough video
@Koszification
@Koszification 4 жыл бұрын
Thanks Keith. I'm done with the first part. However I have a question regarding the management Vlan for the switches. I don't see any? :) When we do a "show vlan" on a core switch this is the outcome: 10 PUBLIC 20 PRIVATE 30 VOIP 40 CCTV
@KeithBarker
@KeithBarker 4 жыл бұрын
Thank you for the question Koszification. The short answer is, there aren't any. You will need to create the appropriate SVIs, assign an address from the correct address space, and then set up a default gateway. Great practice of several items. Thanks for the question, and enjoy!!!
@prateektanwar1207
@prateektanwar1207 4 жыл бұрын
Hey Keith, Hope you are doing good this was a great lab almost everything is done the ospf neighbor adjecency came up and servers ccan ping each other and all the routers however the issue I am facing is the pc is not able to ping the g 0/0 int on R1 it can not reach it the g 1/0/3 int of cor e 1 is in vlan 40 however pc 1 is in vlan 10 intervlan routing is enabled i dont know what to do please help regards from INDIA , this wad really a great lab :-)
@KeithBarker
@KeithBarker 4 жыл бұрын
Thank you prateek tanwar for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you! Let's do this. Save the lab at the point your stuck, and send it to me in a DM in discord? Links for discord are in each video, and I will be happy to look at your lab to see where the problem is. See you soon.
@prateektanwar1207
@prateektanwar1207 4 жыл бұрын
@@KeithBarker hey Keith thank you so much , I did it found the problem the router didnt had a route back to the PC so I just had to add it I added the route to all the vlans and it's done it's working now :-) . This was a great lab
@haroldgar12
@haroldgar12 Жыл бұрын
does anyone know if he did a video solution on this lab?
@wally19
@wally19 3 жыл бұрын
Keith, im working on this lab and im stuck trying to access the webpages. Those are the ones i can see from Services? i mean, its just image.html or how can i see the full url? i tried using the ip/image.html but im not sure if im on the right path or i need some extra work like dns config Thank you!
@wally19
@wally19 3 жыл бұрын
well.. now is working lol i think packet tracer needed a bit of time to get things updated.
@Alex-eg9yd
@Alex-eg9yd Жыл бұрын
I am pretty stuck on this one. I have OSPF configured between R1, R2 & R3. Each Router can ping the servers, but I am having trouble getting the VLANs behind R1 to show up in the routing table, thus the packet does not get returned. Can someone help me out?
@KeithBarker
@KeithBarker Жыл бұрын
Hi @Alex-eg9yd! Make sure all the interfaces on R1 are included in OSPF. If you are using a single area (0), and easy way to verify all interfaces are participating is by using the following in ospf router configuration mode: network 0.0.0.0 255.255.255.255 area 0 Then, make sure that R1 is an OSPF neighbor with R2 and R3: show ip ospf neighbors If you have the network statement on all 3 routers, and using the default for timers, you should be set. hope that helps, and happy studies.
@Alex-eg9yd
@Alex-eg9yd Жыл бұрын
@@KeithBarker Hi Keith, First off, thank you for the quick response! Really enjoying these labs! I'm hoping to take my CCNA here soon! Anyhow, right after I left you a comment I was able to figure it out, using two different methods, but none that I'm 100% sure they are correct. My problem is getting the Vlan networks to show up in OSPF after setting the command 0.0.0.0 255.255.255.255 area 0. The way I did it was by configuring Inter-vlan routing on R1 and configuring a sub-interface for each. I also configured port g1/0/3 as a trunk and changed the gateway of the PC to the sub-interface on R1 (10.16.0.5). This works and can access both servers, but I can't ping either of the core loopbacks. That is also my other question, I know this was not part of the task, but how do I make it so PC1 and servers on other networks can ping the core loopbacks as well? Thank you!
@johnmclaughlin9674
@johnmclaughlin9674 3 ай бұрын
I will return just some sidetracking going on
EIGRP Fundamentals | Cisco CCNA 200-301
23:27
Keith Barker - The OG of IT
Рет қаралды 33 М.
Office Hour: OSPF Fundamentals | Cisco CCNA 200-301
29:48
Keith Barker - The OG of IT
Рет қаралды 20 М.
Интересно, какой он был в молодости
01:00
БЕЗУМНЫЙ СПОРТ
Рет қаралды 3,8 МЛН
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 15 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 27 МЛН
MicroNugget: Cisco OSPF Areas & LSA Types Explained | CBT Nuggets
5:28
What is a REST-based API❓ (and why you need to know for the Cisco CCNA)
8:45
Keith Barker - The OG of IT
Рет қаралды 36 М.
Network Basics - What is a network? // FREE CCNA 200-301 course
18:44
David Bombal Tech
Рет қаралды 61 М.
What is OSPF and How Does It Work?
12:07
CBT Nuggets
Рет қаралды 105 М.
Destroy the Barriers -  Use Ansible Today on Your Home Lab | Cisco CCNA 200-301
21:01
Keith Barker - The OG of IT
Рет қаралды 35 М.
Ideas for Working with Your Home Cisco Lab | Cisco CCNA 200-301
16:35
Keith Barker - The OG of IT
Рет қаралды 18 М.
Can you implement a fault-tolerant default gateway???  Try this free Packet Tracer today.
13:05
IP Addresses Explained | Cisco CCNA 200-301
12:51
CertBros
Рет қаралды 456 М.
OSPF Explained | Step by Step
13:50
CertBros
Рет қаралды 967 М.
Интересно, какой он был в молодости
01:00
БЕЗУМНЫЙ СПОРТ
Рет қаралды 3,8 МЛН