Kel-Tec KSG Shotgun disassemble & reassemble

[@New2Kendo]

Finally got a KSG and didnt pay 3x MSRP. Thanks for the video I was having a hard time trying to figure out how it went back together together, your video made it much easier. Now that I have done it I understand how to do it, but I was ablut to loose it for a min

[@OrcsRDorks]

why do people thumb down your KSG vids you're good at showing it off! i bet they're jealous they don't have one!

[@gregorysargeant8479]

Your video saved my life. I just got a KSG 25, I followed the instructions and took it apart. Super simple, cleaned it and went to put it back together....oh my god, putting that bolt back in correctly took me hours. Most of the videos online dont really show the "line" that has to be in the groove for it to go back together. Everyone focuses on the 90 degree turn and magically it reassembles. I struggled to get the bolt to stay in while putting the butt stock back in place.

[@MrShadow1995.]

I can't even do it no matter how many times I try

[@diogenes505]

Thanks for the assembly video. Great detail on getting the bolt in place. Bonus feature! Now I know what those two holes are for at the base of the grip.

[@DJ369-Miami]

hey, you really helped me put it back together again.This gun really needs a slide grip up front to eliminate the chance of any weak stroke.

[@michaelpollock9166]

I just purchased one of these today, glad to see such a well detailed video on disassembly for cleaning

[@eddieimparato]

Appreciate your time and ease of instructions. I feel confident now. Thanks.

[@theARMORYchannel]

ahh you can do it, its good that you learn too. we'd lov to see you do disassemble videos that be great

[@craigroberts6439]

Great video….easier to reinstall bolt if you turn the gun right side up. Thanks for the great tutorial.

[@theARMORYchannel]

np buddy thanks for watchin

[@theARMORYchannel]

were gonna do it again for the people who missed out keep and eye out for the video

[@superpug666]

the shell ejection amazes me! cool vid buddy

[@theARMORYchannel]

thanks buddy your videos on the Ksg is what convinced to to buy it

[@MARSOC44]

Nice vid Pete. Though I'm not a fan of keltec I can appreciate you showing this on your channel. Keep em comin big guy.

[@theARMORYchannel]

its a very durable gun look up the torture tests

[@theARMORYchannel]

thanks Paul you should get one some day

[@caddilacjim]

The ksg is a sweet shotgun,seems pretty easy to take down.Great video Pete.

[@DevilDog78]

It would have been nice, if Kel-Tec had said how to reassemble the bolt carrier. Thanks.

[@smilemoney]

It appeared from the video that the internal parts looked fairly durable. Fairly simple at least for the first layer take down. The whole package was small enough that you were able to get it all on video.. which is one of major features of this design. Still would like to see someone shoot a round of skeet with one these though.

[@oneemptymag]

Great video Pete this will be helpful for me if i can ever find a KSG

[@EvanC8]

thanks for showing the slide release buttons workings.thats nice and simple

[@phantomgh0st37]

Thank you! The bolt and taking the buttstock of the shotgun off was my problem. It acquires more force even with be oiled up. But, runs like a champ! The lining of the teeth is where I had the most difficult time at. I had figure that one out with my gigantic hands. Haha!

[@theARMORYchannel]

thanks im not there biggest fan ether but they did great with this design

[@aaronzx10r]

Put another hundred rounds through mine today, still running strong. Glad yours is dude.

[@theARMORYchannel]

yeah there hitting the thumbs down every time i do a KSG video if they have something to say there gonna have to write it in front of everybody instead of trolling with the ratings button

[@01Trashman1]

I was having a hard time getting the bolt back in. Thanks

[@theARMORYchannel]

anytime these are may favs

[@TheARMSChannel]

Pete, do you like this as much or more than your Benelli?

[@ebomey]

What's the best plastic cleaner?

[@BigDawg0120]

hey pete, I thought the shirt order was going to be on for a while the store now says new orders are closed, are you planning on doing anymore anytime soon?

[@theARMORYchannel]

mine too

[@theARMORYchannel]

hope you get one

[@theARMORYchannel]

the m4? no but there used for different reasons my house is small thats why i like the KSG so much

[@BRADH-xw8sw]

IMPORTANT NOTE FOR RE-ASSEMBLY :- It is possible to reassemble the bolt carrier plate with the long arms that attach to the front stock, UPSIDE DOWN. This will make it impossible to re-insert the bolt itself properly. Sadly it took me some time to figure it out.

[@theARMORYchannel]

it be cool if they made a semi

[@theARMORYchannel]

thank you

[@rickdavid1795]

Thanks That bcg is a challenge sometimes

[@theARMORYchannel]

sure any movement will help break it in

[@theARMORYchannel]

thanks buddy

[@daleschmidt7157]

I wish mine were as easy to disassemble. Mine is very tight to remove the trigger section. I find I must pull the action back to remove the trigger unit. Even then it is still a little tight.

[@Rogerthat5x5]

It takes down easier than I thought it would! I would like to get my hands on one. What oil are you using?

[@ballistolballs]

Pete do you think "dry raking" it with snap caps would help smooth it out just like firing? THANKS

[@xeroblastx]

Just got the ksg and it does not like snap caps at all. It double loads and hangs up left and right... Many ppl have sent theirs back thinking something is wrong but it isnt... Its the caps

[@l4h4l11]

Guess who just got a double feed with snap caps cause they wanted to make sure it cycles.

[@theARMORYchannel]

[@hazman440]

Wow , very simple ... that's an awesome shotgun !

[@reginaldjohnson1021]

Million dollar question if you had rounds in the chamber how would you take them out

[@SoulSurvivorX2]

Nice job Pete. As for me Mike does all the cleaning around here :)

[@oliviacharltong1188]

How many rounds does this have?

[@mafirearmsafety]

There is a new selector switch for The KSG on KZbin called the FTSS, check it out.

[@donsimons9810]

hammer bar i think keeping me from getting the grip all the way on..

[@rangerpl2636]

Thank you, finally got my KSG back together!!

[@theARMORYchannel]

I dont mind a reasonable amount of thumbs down but when they intentionally come over just to thumb it down screw that or YOU TUBE should show who thumbs down a video and thumbs up a video and im sure it would be more honest of a rating,

[@eagle2032]

Looked like it was gonna be a pain in the cannoli, but very easy looking disassemble.

[@theARMORYchannel]

there tough to find right now

[@randylyons1214]

I'm brand new at shotguns -- and made a dog's breakfast of disassembling and reassembling the gun for the first time. Your video is the fifth one I've watched -- and the first one that clearly explains and shows what's involved in getting the firing pin properly installed. "Thank You" is insufficient for responding to your video!!

[@generalarmamentcompany]

That shotgun is crazy badass lol I love it!

[@2430c]

Thank you for the demo.

[@maniacmatt1782]

I am having trouble with my KSG. rounds won't come out of the mag tube. They are hanging on the cartridge catch no matter how hard I rack it. The shells never drop on to the lifter. They extract just fine. Do you know any Gunsmiths in the Philly area that are familiar with the KSG that could fix this problem? The other issue is this is a used gun. Keltec doesn't honor the warranty for a 2nd owner even though the manufacture date is March 2016.

[@RasDaRadarMan]

Does anyone have any tips on taking the KSG- 25 apart. Its mostly the same but something about the unscrewing the tubes with the quarters is different

[@jeremiahking2058]

I've put about 500 rounds through my KSG absolutely love the shotgun.

[@MrTopwaterjunky]

Interesting vid Pete! Thumbs up!!

[@JinkxSoldga]

great close up/dissembly vid!!

[@508Mango]

Thanks for the great video Pete.

[@dravenparise2499]

Thanks! For the life of me I couldn’t figure out how to put my bolt back in. You helped a great deal.

[@lifted0422]

PETE, the next video in the series should be the ksg vs a regular pump shotgun shooting 15 rounds side by side see which one is faster. get one of the other guys working at the range to run the other gun and you can run the ksg. This will shut up all the troll haters.

[@benjibanks7894]

I bought my ksg new and noticed I can rack it back without pushing on the release. Is that normal??

[@loutube1000]

Safety off you can

[@theARMORYchannel]

cant wait

[@egrods2]

Good training! Ready for Level 2 Disassembly/Assembly!!

[@jeremywilliams8501]

i cant get thae back off hitting it as hard as posible plz help

[@wilcoxtactical3716]

This is a field strip, not a disassembly video. Disassembly would include removing the magazine tube springs, followers, barrel nut, safety, trigger, hammer, etc.

[@theARMORYchannel]

M PRO 7or Balistol

[@theARMORYchannel]

thanks bro

[@bobbybaumann1985]

ekim did you find out if that's normal

[@theARMORYchannel]

i know the feeling man

[@daleschmidt7157]

My FN P-12 and my Kel Tec KSG are my two Shot Guns of Choice. My KSG would be my favorite carry gun, if it were a carry gun. Darn, no gun is perfect.

[@toma674]

Very cool and easy..Thanks again Pete for helping me with my Ruger on Sunday..I'll keep ya informed of the progress.

[@theARMORYchannel]

thanks T

[@avalon449]

Ratings disabled???

[@theARMORYchannel]

LOL your magic with the hammer

[@theARMORYchannel]

thanks bro, and thanks for everything man

[@tkilgour]

Nice and simple. Thank you sir!

[@BrianCirillo]

Nice vid Pete.

[@theARMORYchannel]

yeah man

[@EvangelineCrimeScene]

Video was very helpful, thank you!

[@Bulwark1911]

Kel-Tec's offering is the best of the bullpups. Though i'm not a fan of Bullpup designs in general, if I was working in tight spaces, i'd have one for sure ! Also you get a much higher rounds count over other modified / shortened shotgun platforms. I'd get one today if it were semi-auto ^.^

[@MyHollowpoint]

The twist and lift up step would cause me to get the hammer out :)

[@trippyhare]

This channel has saved me countless headaches. Much obliged! :D

[@johnsonl337]

Thank you, this a very informative video. I just got a Gen 2 KSG

[@NickiSig]

Great vid Bro-- it's hockey time!

[@deejayimm]

Thank you

[@henrypaine2123]

For the life of me, I can't get that stock to go back on. I've followed all the videos I can find and it will just not go in.

[@theARMORYchannel]

LOL they just try to piss me off and it works!!! so i will not give them the satisfaction they can stick that thumbs down UP THERE ASS! LOL

[@The1curiousgeorge]

Excellent, easy to follow. Thank you.

[@aplong1911]

I love this channel

[@bastichforhire]

Good vid Pete. You should name your ksg ". Troll slayer!"

[@troy9er]

Nice vid, thanks for posting it.

[@tigerrc]

Thanks！Really help！

[@bhutjokolia]

Great trick to put the bolt back in, Thanks

[@irafowlerjr.7492]

big help, thanks

[@samanthanick6580]

Great video. Helped me out a ton. Much appreciated...

[@thomasprosser936]

Would be cool if you would've had the camera closer. I couldn't see shit.