Print and Cut Tutorial: Creating Product Labels with a Silhouette Cameo 3

Print and Cut tutorial explaining each setting and showing how to create your own product labels. A tutorial where I show some of the ins and outs of the Silhouette Studio and the Print and cut feature for Cameo 3 users.
A few things even go wrong, and I get to troubleshoot them!
HTVRont Printable Vinyl: amzn.to/3Oq46Q4
Creative Fabrica $4.99 promo link:
www.creativefabrica.com/promo...
Printable vinyl available here:
snippy-sisters.co.za/product/...
I try post as much content as I can on Social Media, so please follow me there!:
letsgetclacking
letsgetclacking
Amazing No Copyright Music Provided by:
▶Soundcloud
@roa_music1031
▶KZbin
→ / roamusic
▶Instagram
→ roa__music
▶Spotify
→ open.spotify.com/artist/1ETpopXATGuq7AFCoQYFtk?si=-scywXT7Q5O8AAC6aagkKw Channel by Kelly Rossouw

[@beckyzayas5749]

Excellent. First person that shows what to look for and how to correct mistakes.in print and cut. Thanks!

[@KellyRossouw]

Thank you! I do plan on doing more in the future - Print and cut is so useful, but can go so wrong so easily! :)

[@k.1475]

Thank you! I purchased my cameo 3 years ago and its so overwhelming sometimes to learn everything. This is so helpful and I am going to try this out this week! Thank youuuu!

[@KellyRossouw]

I know that feeling all too well! There is so much to learn and try, but take it baby steps at a time and enjoy the journey

[@lisahaggard5749]

Wow, thank you! I just recently bought a cameo and am still learning how to use the software. Looking forward to learn more from you.

[@KellyRossouw]

Glad it was helpful! There is so much to learn! I hope you enjoy your journey!

[@Pre.C_King]

Well that said it! Super well explained. Finally found a GOOD tutorial for the cameo 3. Hoping to find more like it on your page, I'm subscribing! Thank you

[@KellyRossouw]

Glad it was helpful!

[@beaunettbaltasar7895]

Thank you so so much for the detailed tutorial. First time and no mistake. Love your Channel, xxx

[@KellyRossouw]

Thank you so much!

[@amandagfox]

This was a great tutorial!! I’m a newbie to Silhouette and trying to master print and cut. So much to learn!!

[@KellyRossouw]

Glad it was helpful!

[@FullaSugga]

I'm subscribing to your channel. I love your style of teaching!! Thanks for this tutorial 💖

[@KellyRossouw]

Thank you so much Fulla! Welcome to the channel

[@grahamhodgson9426]

Excellent presentation skill...explanation, demonstration. Your T- Shirt says it all.

[@KellyRossouw]

Thank you very much! Appreciate it :)

[@karenreeves3958]

Thanks for such a detailed tutorial on making stickers. I always have such a hard time figuring out how to make them the correct size. I love how you colored the different parts of the stickers, especially the text. Would love to see a more detailed tutorial on coloring text or other things. Thanks

[@KellyRossouw]

You are so very welcome! Im thrilled it helped you :) Glad the colouring trick helped! Definitely something I can do in the future :)

[@susanclifton9494]

Thank you . You explained so well .

[@KellyRossouw]

You are so welcome! Hope it helps 😊

[@the3culbstateers]

Thank you!! I haven’t been able to successfully learn how to print and cut on my Silhouette Cameo 3 and because of your VLOG today after 6 years I had a successful Print and cut!! Thank you. I was about to sell this machine. 🎉😂❤

[@KellyRossouw]

I'm so glad!!! Well done on doing the ACTUAL hard part of the job!

[@madameDupoux]

You are a gem. Thank you!

[@KellyRossouw]

Absolutely any time! Happy to help 😘

[@laurabousfield8196]

Oh my goodness. You are a God send. I have a cameo 3 and have battled along for so long. You have enlightened me I am so excited to try doing labels. Thank you so much. Also excited that I can subscribe to a South African.

[@KellyRossouw]

I'm so glad that I could help! Good luck! Yes there aren't many of us saffer craft youtubers 🥰

[@laurabousfield8196]

@@KellyRossouw Yip so much help. I feel a bit of a poop for not figgering it out. Again thank goodness for Ladies like you.

[@KellyRossouw]

@@laurabousfield8196 No not at all! Learn from my mistakes :) You are most welcome - happy to be able to help!

[@gerdacope9331]

Thank you. I got my 1st try right!

[@MsTJPink]

Thank you for that, I needed to learn it so bad!

[@Zeinabeauty]

Love it !! 💫🤍🌹

[@KellyRossouw]

Thank you!!

[@norinemueller4588]

You do such great videos thank you

[@KellyRossouw]

Glad you like them!

[@lindapuente8629]

You have save my life ! I have a cameo 4 plus but I never use it because I don't understand the software. My maker machine will not calibrate and I have an order of stickers that I have to make by this week so I'll follow your tutorial and use my cameo instead.

[@KellyRossouw]

Yes! I highly recommend the Cameo for print and cut over the Cricut - Cricut is amazing at a lot of things, but their print then cut needs some work :)

[@franchiseplaya75]

Thank you so much for this.

[@KellyRossouw]

You are so welcome!

[@FourCornersCustomProducts-4CCP]

Awesome tutorial 👌

[@KellyRossouw]

Thank you! 😍

[@lv-dancer-aerialist]

Love!

[@KellyRossouw]

Thank you!

[@coconutbloodline]

this really helped thanks

[@KellyRossouw]

So happy to hear it helped you! :) Thank you!

[@kingtyhj]

🔥🔥🔥🔥🔥

[@Snoodlezsaid]

Hello. I just came across your video. I somewhat understand the print and cut option but im curious and would hope for some advice if possible. I plan on using my silhouette for full business labels for products (title, ingredients, net wt, etc). Would you say the portrait would be better for this kind of niche or the cameo 3? What is the major difference besides the price, size and cut space availability? Thank you.

[@KellyRossouw]

Hi Lemony! The portrait is a more compact, cheaper version of the silhouette, so you wont have much scalability, and can only cut up to 9inches (I think) - But it is a great starting tool for what you are wanting, eventually you may want to upgrade to the Cameo 4 (3 is only available second hand) - but you can save up to get the 4 once you have a need for it :)

[@AndrewAHayes]

I came over from Fusionsource and enjoyed your video's +1 Subs

[@KellyRossouw]

Thank you so much! Hope you enjoy your stay! :D

[@xxsecretdreamerzxx]

Thanks! I was too close to the gray area so my cut was always off. Didn't know about making the registration mark thicker so its easier to find. I put my paper right at the edge of the mat but it's not finding my reg mark so I made it go out of the sticky part by a little so it doesn't have any other line to get confused by. Have you used the pixscan? I don't know how to make my images brighter on silhouette studio so my cuts are always off.

[@KellyRossouw]

I am so thrilled to hear this video helped you! I havent used the pixscan yet, but I have recently bought one so its definitely on the cards! Is your print and cut still not working properly? or is it the pixscan you are struggling with?

[@xxsecretdreamerzxx]

@@KellyRossouw my print and cut seems to be cutting correctly now. Hopefully it continues. My pixscan still giving a bit of trouble. First it's hard trying to calibrate it, then it's saying it's not matching, then the cut line is not where it's suppose to be. But I was using it at night with my light on so I need to try more when it's brighter.

[@lynnenc]

Can you use a 12x12 Cricut mat with a Silhouette Cameo 3? My mat is messed up and the only mat I seem to be able to find is a Cricut. Does that work? Many thanks!

[@KellyRossouw]

you can, but please note: they are not the same size (outside of the grid), so you will need to cut them down to get them to line up properly, and the mats are thicker, so extended use of these mats may affect your machine negatively :)

[@backyardhobbies2693]

Hey good day.can you show how to save and print the design. And what kind of printer did you use?

[@KellyRossouw]

Hi Amy! I do go through it in another video here: kzbin.info/www/bejne/jHLcpWmtrZyLoNU

[@crowznest]

You have literally saved my life with this tutorial.

[@KellyRossouw]

woop woop! Glad I could help! There is another one coming up soon which is more focused on the print and cut, and less on a project :)

[@crowznest]

@@KellyRossouw awesome. I can't wait

[@rosarenteria931]

When I try to make my own size of my square Silhouette Studio changes the size after I enter my first size. Do I need to turn off a setting?

[@KellyRossouw]

You might need to deselect the Aspect ratio lock (it looks like a little padlock) :)

[@user-qr4fv4oj9s]

❤

[@S.c.a.r.l.e.t.t_andherhorses]

Where do you design your logos / stickers ? I’ve designed some and it’s not tracing

[@KellyRossouw]

I design in Silhouette Studio mostly, Sometimes in Procreate and save as a transparent png :) Have you fiddled with the threshold a bit?

[@faithwiegand420]

What is the biggest design for print and cut ? Thanks

[@KellyRossouw]

As big as you can print! :)

[@MyRudy45]

I’ve tried everything to get my cameo to line up when cutting. I use a lamp and I darken the registration marks with a sharpie but it still isn’t cutting correctly! Any other suggestions?

[@KellyRossouw]

Ah no! Im releasing a new video tomorrow on Print and cut with a few different tips and tricks - maybe that will help?

[@MyRudy45]

@K M I'm not sure how to do that but I definitely will try. Thank you

[@aprilthompsoncortinas8928]

What settings do you use?

[@KellyRossouw]

Depends on the material being used! I use this method to find my cut settings: kzbin.info/www/bejne/qYbSapipedaHr6s

[@nell-joanne92422]

May i ask what your blade number and force for this kind of cut? Thank you

[@KellyRossouw]

Hi there! This I cut at a Blade of 3, Speed of 8, and a force of 15 :)

[@KellyRossouw]

@K M What blade depth are you using?

[@zeecervo]

Thanks, but what settings do you use? :)

[@KellyRossouw]

You are most welcome! each paper type and blade is different, I would suggest testing your cut settings before using them as mine probably wont work for you, you can use this video: kzbin.info/www/bejne/qYbSapipedaHr6s

[@dulf811]

How to stick paper on cutting board..?

[@KellyRossouw]

The cutting mat is sticky, so the paper sticks quite easily :)

[@dulf811]

Showing Registration failed 😞 Please show me the cutting options,

[@KellyRossouw]

☹ Have you tried my other Print and Cut tutorial video?

[@dulf811]

@@KellyRossouw yes madam, thanks a lot now problem solved

[@KellyRossouw]

Thrilled to hear it! Well done!

[@daemmerung19]

And you printed that with a normal printer?

[@KellyRossouw]

yes! A normal Canon Inkjet printer :)

[@crispykartel]

You skipped a step tho!! Did you just "print" your design or did you have to print it first with photoshop? I'm using 8.5 x 11 sticker paper... and what about the bottom stickers? Theres no "greay area" just a small red line but not a square to indicated if I can put sticker image there or not. What settings are you using to cut? I want to be able to cut the whole sheet and then flip it over and make smaller cuts so people can peel off easily instead of trying so hard to take the sticker off the adhesive side. Everytime I print in "Black and white" my ink smears. Id rather not have to keep using clear coat spray.

[@KellyRossouw]

You print directly from Silhouette Studio :) The red line is the edge of the cut area, so make sure all of your designs are inside that red box! :) I have another print and cut video which goes in depth on the print settings: kzbin.info/www/bejne/f3mVkKCdp79poa8

[@crispykartel]

@@KellyRossouw Okay I just watched that video but there are still certain things that you didnt cover. I dont think u covered the actual cut settings you used as well. Help please?

[@KellyRossouw]

@@crispykartel I dont cover cut settings for each project as typically they tend to differ per machine, blade etc. So I have this tutorial which allows you to find your own :) kzbin.info/www/bejne/qYbSapipedaHr6s