Kemei KM-1858 the one with a flash light.

[@billosevics]

I feel like the kemei km 2796 and vgr 003 use the same motor and that vgr 001 and kemei km 1858 use a different motor which is either the same just tuned to higher voltage or speed or a more powerful version of the same motor

[@scizzahands]

Yes they seem very similar

[@jrouse1965]

Love you channel if you get a chance review the Kemei 2351 sharpest line of any trimmer I have got the FX gold got to Saber and I got the Kemei 2293

[@scizzahands]

Thanks 🙏🏼 hmm I’ll have to look into it I was just about to buy another 2293 the silver one .. does the 2351 charge usb-c that’s a big thing for me these days? Thanks for the recommendation 🦾🚌💈

[@mariafil7249]

do you really feel that it cuts that much better than the kemei km 2796.I have heard a lot of people say that :,.Is it really that much noticeable?i mean the horsepower between the two.Don't they have the same motor?

[@scizzahands]

It doesn’t feel anymore powerful same motor I believe …the build feels slightly more solid but the 2796 cuts with two blade options fade and taper that are quick release and easily swapped so to me the 2796 has slight advantage

[@ngoduc4510]

Should i get kemei 1758 or kemei 2796. They both have similar price

[@scizzahands]

2796 is a better option super long battery life and 2 swappable blades

[@jimmymitchell8403]

Can you do a video on the VGR V688????

[@scizzahands]

From my knowledge they will give you a similar cut to a wahl magic clip with a very similar max rpm .. vgr 003 looks to be still superior to it

[@rcruzkarateteam2801]

I've just bought mine and have used it to cut 6 clients. What did you think of the guards that came with it? The 1 guard leaves a huge gap between its teeth and the clipper blade, so it was kinda hard to remove the lines from zero open lever to the next length. I tried using my Wahl Premium guards and they felt loose on the blade. The only guards that felt solid with it where the cheaper green plastic Wahl 0,5 guard. Am I the only one who's felt that?

[@scizzahands]

The guards that come with all these clippers absolutely suck .. Wahl premiums work but on some of mine I had to bend the tabs a little so they wouldn’t rattle.. TPOB XO guards work and gamma magnet guards work

[@tolhildan5023]

I’ve never tried on this clippers but jrl guards(same as tpob play) works best on any clippers and type of blades

[@scizzahands]

@@tolhildan5023 I don’t doubt it thanks for the info 🦾💈🚌

[@marck743]

Hello, Between the vgr 001 and the kemei 1858, which one would you recommend? Does the Kemei 1858 lose power when the battery runs out?

[@scizzahands]

The 001 is the better of the two .. some of the ergonomics aren’t that nice but super solid.. nether one of the them slow down as the battery gets low. They will just shut off at the end of battery 🪫 but both have battery display and excellent battery life.

[@MoustafaMuhammad-d3p]

How is it now after a month from the video. Still using it ? What about your opinion generally, is it the best model ever from Kemei or not ? ( Excluding 2373 )

[@scizzahands]

Still running smooth and quiet.. it is my clipper I use when doing house calls when I do t take the bus .. I like the 2796 better

[@scizzahands]

Feels a little cheap but has some good features

[@MoustafaMuhammad-d3p]

@@scizzahands Which one you meant ? and if you please let me know what the features are

[@scizzahands]

@@MoustafaMuhammad-d3p 2796 it comes with two different blades and the are quick release swappable and the battery is massive it lasts forever.

[@billosevics]

This one must have a brushless motor.I have found out that one thing is true with kemei:if they write something on their box and device then it is true.I don't know the exact name of the motor.But it is a brushless one

[@scizzahands]

I wouldn’t doubt it it’s smooth and quiet

[@DNMBaccus]

Does the tpob blade fit on it?

[@scizzahands]

I know for sure the XO blade does

[@DNMBaccus]

@scizzahands Nice i might try out the clipper. Im using tpob troll right now.

[@billosevics]

Does the blade get hot after running for some time?

[@scizzahands]

I haven’t experienced it getting hot but will get warm faster when on 9000rpms but that’s the case will all clippers.

[@billosevics]

@scizzahands other than kemei km 2373 I feel like this is the best hair clipper kemei has to offer. There is a kemei km 2286 but it's pretty noisy and I feel like, though the reviews say otherwise, it is severely underpowered .I don't feel like this is the case with this hair clipper.in general kemei hits and misses a lot of nails with each of their products,except for this boy.They didn't cut any significant corner and it seems well rounded.

[@scizzahands]

@ it very smooth quiet and powerful.. your absolutely right Kemei quality is hit or miss between the different models this one is a solid machine Forsure

[@zizoaziz6119]

Km2796 or km1858😊😊

[@scizzahands]

2796

[@zizoaziz6119]

@@scizzahands thank

[@mol9812]

Repair KM1858 hair clipper

[@scizzahands]

Repair? It’s not broken