Kenmore Washer Won't Spin And Makes Noise

[@catasus01]

Fast Eddy, I’ve been battling with my Kenmore washing machine for months trying to get rid of the noise, after replacing the splutch kit it wasn’t long before the noise came back. Watching your video helped sooooo much, I want to let others know that using the blue lock tight and if possible using the impact driver makes all the difference. Thank you for your guidance, I’ve given you a big thumbs up and subscribed to your videos. Scott

[@grahamhunt4511]

Thanks about to embark on repairs and think that was the problem pulley trashed appreciate your directions 👍❤️

[@raulcontes5533]

OVER THE TOP!!!!!!!!!FROM PUERTO RICO!!!!!!

[@timvo4675]

How do you that kind a part to make to order? Please tell me thanks

[@johnsneed5827]

Okay I caught the last part of the video where you describe the white beveled piece is pull in to allow the machine to actuate. I maybe saying in reverse. My question is when I am placing the pulling back on, do push it in until it pushes the white bevel piece in. Please assist.

[@Fasteddiesinhomerepair]

Pulley needs to be tight to the center shaft

[@chabaliss]

I have a kenmore 90 series washer the water fills up and drains but it doesn't spin. What could be wrong with it? Trying to fix it myself I took it apart and checked the coupler but it's fine.

[@neils1029]

How do I disable the temp. Control so o can get pure hot water?

[@Fasteddiesinhomerepair]

You can't it will cause an error

[@paulwatkins2601]

My washer is different to this one, but nevertheless I watched and learned for future refence very informative thanks for making this video.

[@Grace-xn2om]

I have the exact same washer that makes that irritating grinding sound and has stopped spinning and draining. Before ordering this kit, somebody else mentioned a motor coupler. Where would that be on this particular machine?

[@Fasteddiesinhomerepair]

no coupler on this model this is probably your problem

[@Grace-xn2om]

@@Fasteddiesinhomerepair Thank you sooo much. After looking under the washer I could see the teeth were really worn, and the piece was cracked or broken. Don't know about how to do a recalibration though.

[@michaelvaldez9925]

just want to say thanks for the walk through bud

[@goodvibeztv]

Hey can you tell me the model number of that part because my washing machine is giving me the same problem

[@Tata-iu3fy]

What is the model number for this?

[@MW-sv1dp]

Where do you order these parts at?

[@amo23_99]

So I got a kenmore series 100. And it sounds like beads are at the bottom when it starts spinning. I'm trying to find a video of how to take it apart. But I literally do not know what I'm doing at all. Help please sir

[@carlosthomas4468]

Mines acts like its spinning and draining then the clothes still be soaked. My fiance load it worked second it didn't. First started last week. Bout to dry the second load how long it takes. But smart white load it drained drained. Tryna jump on it before it gets worse.

[@savonyacouncil2167]

I need to know what cubic feet is this particular washer? Is it 3.5 or 4.2 etc

[@velmar25]

My washer only washes and after it stops completely can you please help me with what I would have to do to it. Thank you

[@ScantPear]

16:40 hold it right there boy DO NOT RE INSTALL THAT GUARD ALL THAT DOES IS CAUSE PROBLEMS

[@12321Silent]

Nice vid. You know the part number for the assembly kit?

[@duaneafields]

the model number for this washer is w10468331 White. You can search from there.

[@mrbrianf]

Should the tub (this exact model) be so free moving that it easily bumps outer walls just moving it with my hand? The 4 corner support rods all are attached and appear to be intact. I am going to turn it over tomorrow to look closely why mine is not spinning. Ilayed it over and the tub lays directly on outer walls. Seems too loose to me. Seems to stall and wont churn or spin.

[@Fasteddiesinhomerepair]

You must likely have a drain issue first off yes it's supposed to be loose like that in other words will be able to move around inside the outer casing and I would pull the error codes before I would do anything

[@youngpunkspillingbeeronmys8822]

Do you have part numbers for the fix at the 5 minute mark?

[@robertakerman3570]

Eddie has a bit of comedy in this vid.

[@Vegan4Everything]

Where do I go to get these parts? I tried searching online for Kenmore washer drive assembly parts, but I'm not finding anything that looks like what you replaced.

[@Vegan4Everything]

Nevermind, I found it. They call it a "splutch cam kit".

[@Al_Z.Heimer]

@@Vegan4Everything Got a link, I don't see anything... I mean I see splutch cam kits, but not for this model that is in the video.

[@raulbermudez7757]

my challenge is when doing heavy load it wont drain or go to spin and hood remains unlock. however when i put a very light load it works fine. could it be the pump is somewhat clogged and wont drain water fast enough?

[@Fasteddiesinhomerepair]

Check error codes

[@DanWebster]

I know a lot more now than I did, great video. Keep up the good work, I do appliance work myself have a few videos. Mainly on older stuff, retired now. Subbed, need to check out your videos. PawPaw

[@yvettelane2154]

i have this same washer and it will not spin after i do a wash it will spin if i put it on drain and spin any ideas thanks

[@damesters12]

Same here...what was the issue?

[@sweetpkatie]

Did you ever find the solution to this problem?

[@lexnomi]

What is the name to that part? I have a Kenmore 110.25132411

[@willieelumper508]

I have a similair washer doing the same thing..However my belt is still on and I also lifted the bottem and everything seems in tact..There is manual mode that I went into but still wouldnt spin..

[@Fasteddiesinhomerepair]

The Belkin still Beyond and the pulley not be in place for it to drive

[@Fasteddiesinhomerepair]

And going to Diagnostics and check your error codes

[@MargaritaMartinez-pq8tv]

Me podría decir cómo abro mi lavadora se fue la luz y se quedó con el seguro no la puedo abrir

[@Fasteddiesinhomerepair]

not sure u may have to break the lock

[@rogergodin6443]

Nice video new part has steel inserts ,thanks works great

[@NicoleF061]

May I ask where you found your kit and what exactly is it called?

[@gabrielruiz2033]

i have same washer, mine, the lights lids wont work except sense, so i cant get an error code, i did the calibration cause it didnt do nothing, now it takes water, drop a bit, then do some noice, then get more water, but not spinning, after a few minutes it just drain the water and do nothing more, what could it be

[@NappiMusicVideos]

ever get a solution;?

[@alisalauzon6454]

That's exactly it.I just bought it used. Got 1 load done lol..It sounds just like this.whats The part called,maybe you will soon say!

[@ScantPear]

Alisa Lauzon it's a splutch

[@normanyoung4957]

Tried everything and unable to get it to high speed, clothes still comes out wet, what am I missing.

[@johnhiskings8328]

your washer has too much lint build up in the back fix it soon because it is a fire hazard .

[@Kookamungawerewolf]

john hiskings DRYERS build up lint,washers don’t.

[@Wheelman_dt]

What was the fix I’m not getting high speed spin? Mines spins but not fast where clothes dry. They comes out little wet still

[@damesters12]

What eas the fix?

[@andrewvorobyev8275]

@@Wheelman_dt might have bad start cap or actuator

[@michaelbrown-ho4th]

This nice gentleman helped me a ton!!! But he breathes like a walrus. Lol 😂

[@philipallen3146]

Thanks for the video - it really helped so we knew what to order and what to expect. Seems to be working better now. Worth a $60 investment for these parts :)

[@JohnJones-uh6oi]

¥°#5*)

[@JohnJones-uh6oi]

/=#8_*:)

[@janatono]

i have the same exact washer and right now, I`m having a problem whit, but before i order this part i want to make sure if this is my problem,,, my washer loads up water and washes , i can hear movement but when it comes to spin and drain stops and does not move any more and there's nothing i can do,,will this solve my problem if i changed this part?? please any advice will be good, thanks, hope you can help me

[@ozzie89956]

Have the same washer. Was ur Problem fixed? Thanks.

[@damesters12]

Same problem, hpw did you fix it?

[@NicoleF061]

What is this kit called?? I need it!

[@willpresley8963]

Splutch

[@dexmoore674]

3-14-19 Part can be found at SearsParts direct website. PN is W10721967 (waher drive pulley kit) $29 USD.....Link: www.searspartsdirect.com/part-number/W10006382/0026/110.html?modelNumber=11021102010&categoryName=Residential%20Washers&brandName=KENMORE

[@jamiediseker9232]

My Kenmore washer 100 series won't power on no problem with breaker no problem with Outlet please help

[@Fasteddiesinhomerepair]

I don't know you need an OHM meter to do some voltage checks

[@erikbjorkquist5284]

i have the exact same washer and when this video was almost over and I got a chance to hear the washer work.. is it supposed to sound like that?.. mine makes the same noise and I swear there's something wrong with it.

[@Fasteddiesinhomerepair]

what noise ?the out of balance /the whining of the motor/or grinding of the pump

[@klevy941]

Eddie, I have been helping my neighbor with daily household chores due to an injury of hers. she has this exact washer mdl. 110.21102013 and it has been making this awful noise for over 3 months (she has mostly one load a week) in the spin cycle. it sounds like something hits the wall but finishes the cycle.. Yesterday after I loaded and started the washer I noticed the tub was off to one side and slumped down in a big way that I could see the tub cover was cracked and torn. I stopped and drained the washer. I want to help her out with this if I can. I have taken my washer apart and fixed it, also fixed parts on our two vehicles with youtube help. With out taking her washer apart do you think you could say what may have caused the derail and what parts are now on the list to be replaced?

[@Fasteddiesinhomerepair]

Karol Levy sounds like the struts are bad

[@magstabrown5780]

I have an LG with similar problems now it has stopped agitating and spinning.

[@ashg4045]

Mine wouldn't agitate or spin. I replaced the agitator dogs and got a clutch kit and replaced those parts.

[@chadgrant4552]

mine don,t seem to be spining out i tryed to do the codes and nothing comes up i put it on its side turned belt every thing seems connected anyone got any ideas/

[@normanyoung4957]

My washer was not ringing out the clothes, they came out wet. I replaced the actuator but it still spins slow, what could be the problem

[@4130stampede]

Norman Young buy a new water pump, we did on amazon around 20 dollars.

[@rfranco379]

I also replaced the actuator.. seemed like it washed, but it leaves clothes soaked still..im guessing there's a spinning issue here to dry clothes a bit

[@chrisangelich7750]

Do you have the part number for the kit? I have the exact same washer and the same thing happened. I put it back together and it’s working for now but would like to fix it properly.

[@NicoleF061]

Did you ever find the kit? I'm looking for one.

[@rockfordian23]

Whirlpool W10721967 Washer Drive Pulley & Cam Kit

[@kennethshaffer2107]

Kenmore 80 series spins and drains but acts like its trying to engage wash cycle .agitator stops with a lowd pop and grinding .it will run a full wash cycle but Rince cycle is loud and scarry lol

[@kennethshaffer2107]

Suggestions?

[@anthonyburnette3037]

My washer gets on the rinse cycle and then stops. It is a Kenmore washing machine. and then the green light flashes.

[@Fasteddiesinhomerepair]

You need to put into Diagnostics I have another video that shows that

[@bigdaddy4975]

After you do a repair on that washer like that you need to recalibrate it.

[@Al_Z.Heimer]

Recalibrate what? Is it always necessary? kzbin.info/www/bejne/jYvPnHpmnKyLfLM&ab_channel=SearsPartsDirect

[@MC-mh2ju]

Throw that garbage in the trash and buy an old-school DIRECT DRIVE WASHER.

[@Al_Z.Heimer]

Old school...I don't think so. The direct drive came later. They each have their advantages. On the direct drive, it's the coupler you have to replace. Almost the same process...they used cheap plastic on original parts, but replacements came with metal inserts.

[@MargaritaMartinez-pq8tv]

Por favor ayudeme

[@Jaylen-q6d]

Racer 20:00

[@Fasteddiesinhomerepair]

?

[@johnjohnson7256]

What's the name of that part

[@Fasteddiesinhomerepair]

splutch or splutch kit

[@paulaarieh7692]

It starts. Some water comes in. Red light goes on then disappears just green light stays on but stops cycle with barely any water and doesn’t continue Kenmore 1102513241

[@zac7062]

61 Minutes To Wash

[@73superglide62]

Lol

[@drekelley2352]

Put electrical tape on you channel lock teeth

[@americanpatriot5836]

Appliances today are junk

[@johnnguyen8339]

poor vidio!!!