KENWORTH T680 Sleeper Tour

This is an in stock Kenworth T680 with the 76" tall sleeper. We carry these units in stock all the time with either X15 cummins, Paccar MX-13, manual or automated transmissions. If you're interested in complete details and specs contact me below:
Andy The Kenworth Guy
[e-mail]
204-293-9180
To ensure you don't miss out on future videos subscribe to my channel.
www.youtube.com...
To see my full new & used inventory visit my web page:
www.thekenworthguy.com
Check me out on the social sites:
Facebook: / thekenworthguy
Twitter: / thekenworthguy
Instagram: / thekenworthguy
Snapchat: / thekenworthguy
Tumblr: / thekenworthguy
Other web pages to visit:
www.customtruck.ca
www.kenworth.com

[@alphahypetrucksocialmediaa7115]

Hell of an intro Andy! Great Videos! They get better and better.

[@AndyTheKenworthGuy]

Right on! Thanks for watching !!

[@KenworthofRichfield]

We do similar specs here in the states for a stock truck also. Some slight differences, but overall, it's a truck that works really well for a ton of different applications. Well done and thanks for the tour!

[@AndyTheKenworthGuy]

You bet Josh! Great truck for OTR!

[@shahid55s52]

Helped lowering the top bed. Thanks

[@rosswieloch1115]

The T680 with the full sleeper is my favourite truck.

[@AndyTheKenworthGuy]

Sure is a nice one. Thanks for watching Ross.

[@prettylittlephotons]

Love how stream lined the trailer brake is. 👌

[@timgragg5466]

I'll be getting one but it will have the X15 cummins!

[@AndyTheKenworthGuy]

Nice!!

[@talan2298]

Ok this is good information. This way I know.

[@Tropicanax7x]

Ok thanks but where is the dang latch for the lower bunk storage😂

[@briankoch5927]

Thank you for the tour Andy

[@AndyTheKenworthGuy]

You’re welcome Brian

[@wesleyrose1824]

I like that truck especially the seat swivels around like It did

[@AndyTheKenworthGuy]

Awesome! Thanks for watching Wesley!!

[@prettylittlephotons]

Pure gorgeousness!

[@graciebradbury6730]

Hi Andy I'm watching one of your videos and at the bottom of it it says stop the Kenworth guys store from spring and that's something I would never do is someday I would like maybe I would like to go back to driving a truck because I retired from it in 2006 because the company I was working for was my father's and I did a lot of traveling for him in that Kenworth that I had back then and it was a wonderful truck and I covered the whole United States in Canada numerous times and even went to Alaska for him six times but whoever's got that written at the bottom of your video it just somebody trying to steal your business but they would never get me because I like what you show on these videos well anyway if you want to know my name it's Al Bradbury and I've been watching your videos for a long time now and I like each one of them you have a good evening and sometime soon I'll text you again if you want to

[@johngoss367]

Hey Andy the Kenworth guy, could you please give me the mattress dimensions of a 2016 T680 with the 76" dbl bunk. Both mattress' please.. thank you 👍👍

[@AndyTheKenworthGuy]

42x80

[@anthonyallende9544]

Ryan Reynolds second career job😂😂😂

[@CONJUNTORON]

I'm in a 2018 T680. How do the bunk speakers turn on? There's no switch to turn them on. Thanks.

[@AndyTheKenworthGuy]

If they were ordered on the truck they are connected to the main radio. They should work.

[@mypersonalopinion5363]

Sometimes there is a button in the sleeper ti turn them in and off in case you running tea.s or have someone in the back sleeping. That's how it is in freightliner. I thought mine had a loose wire until I figured out

[@vovasig4517]

Hi Andy,nice vids,very informativ.It's a piti american stile trucks are not fit to Europe.As a trucker I can say it would not be possible to enter into 90% of log yards here.Greatings from Portugal.😉👍

[@AndyTheKenworthGuy]

Cool! Thanks for watching Vova

[@bankergeorge]

Cummins all the way

[@MrCord45]

How much is the current price of a 2019 T680 and will it pull a fifth wheel toy hauler

[@AndyTheKenworthGuy]

Set up properly it will tow a 5th wheel toy hauler. Pricing will be determined by options but likely in the $170-200k Canadian funds

[@martinflawless675]

Hey Andy I’m looking to buy a kenworth myself where are you located also are you offering customers to buy the truck or lease the truck or your dealership offers both let me know cool video tho

[@AndyTheKenworthGuy]

Hi Martin, thanks for watching the video. I’m located out of Winnipeg Manitoba which is in Canada. I’m only able to sell trucks to Canadian customers. Let me know if you’re interested in taking a look and I would be happy to help. My phone number is 204-293-9180

[@ericcongarcia]

Nice truck !!

[@AndyTheKenworthGuy]

Thanks Eric

[@waynenorbreyjr9371]

Love the T680 and how it's layed out. Not a fan of the color, then again white is probably the primary color that most trucks are painted with.

[@AndyTheKenworthGuy]

White is plain Jane but great truck to put to work almost anywhere. Thanks for watching.

[@waynenorbreyjr9371]

Andy The Kenworth Guy Your exactly right and as always thanks for taking the time to do these videos.

[@riseagainstfb]

Wayne Norbrey, Jr you love the t-700 i guess too..

[@waynenorbreyjr9371]

riseagainstfb I like the T680 way better. The T700 for some reason doesn't look right to me. It's a lil bit too wide for me and it shares some things with the T2000(I think) that I didn't like. The T680 is a much nicer look truck. Not to narrow and too wide.

[@AndyTheKenworthGuy]

The T700 is a T2000 with a new hood, headlights and chassis fairings.

[@josiascruzgomes6525]

Hi, my meme is Josias, l'm Brazilian. Bealtiful truck, l love American truck

[@AndyTheKenworthGuy]

Thanks for watching Josias

[@restless7528]

Nice very good video!

[@AndyTheKenworthGuy]

Thank you!

[@robertgoffjr2450]

Nice truck.

[@AndyTheKenworthGuy]

Thanks for watching Robert!

[@fairarthur]

What's the cost for the new fenders? I want some on my 2015

[@AndyTheKenworthGuy]

You will probably end up spending about $1500-$1800 depending on where you get it done.

[@shoey64]

How Quiet is the truck when running?

[@AndyTheKenworthGuy]

They are very quiet. Not sure the DBA but they are so quiet.

[@shoey64]

Can u get a trailer hand brake in the truck?

[@Jimbobd421]

shoey rocks it’s on the dash now.

[@skywatcher4602]

You didn't show how to lift the bottom bed

[@AndyTheKenworthGuy]

I do in some of the videos. not all though.

[@thesoulreader2578]

I’m in a 2019 Kenworth T680, with the X15, and automatic shifter, double bunk, with a fifth wheel unlock switch.. it’s alright I guess

[@AndyTheKenworthGuy]

Cool. Thanks for watching! I appreciate your service as a driver!

[@sabinennc]

Designed by men for men. I drive one of these right now and HATE it. 1. Worst headlights ever 2. Washer tank sitting up so high and inward I can't fill it. I'm too short at 5'5" 3. weird locations for headlight switch, hard to reach when short 4. Really, I can climb in the upper bank with that 1 little step? Maybe if I was tall I could. 5. Drawer fridge is worthless, even smaller than a freightliner fridge. 6. The storage on top of cabinets is worthless f you're short. Why not have the cabinet go to the ceiling? 7. My mid roof Freightliner had more storage than this condo. Teeny, tiny little storage cubbys. Above front seat and by bed. Big enough for maybe your toothbrush and paste.

[@josiascruzgomes6525]

I'm sorry, but how much does a truck cost?

[@TacticalTrucker]

Josias Cruzgomes $167,678 because I have mines with the Cummins x15 450hp

[@sukhs1317]

How much this model can cost?

[@AndyTheKenworthGuy]

Please email me at [e-mail] for pricing.

[@dustintabor9045]

can you get that truck in automatic transmission can you do a video of it tour of it

[@AndyTheKenworthGuy]

Hi Dutin, We can offer the automatic transmission. I have done videos in the past with the automatic. Thanks for watching.

[@dustintabor9045]

@@AndyTheKenworthGuy can you do one video

[@waynenorbreyjr9371]

dutin tabor Allison, Eaton Fuller Ultra Shift and the Paccar are probably the three most recognized. If I'd had the choice I'd try the Paccar Automated Transmission. Allison is another great choice. They've pretty good transmissions.

[@AndyTheKenworthGuy]

I’ll do one on the paccar automated tranny soon. I have some coming in shortly. Thanks for watching guys.

[@dustintabor9045]

@@AndyTheKenworthGuy thank you dude

[@davewolly3682]

Comeon !!! Why drums in the back ??? The best thing is disc brakes all around.

[@AndyTheKenworthGuy]

Disc all around is a great option!

[@MICKSHRED]

Can yall get new k200s?

[@AndyTheKenworthGuy]

No that’s an Australian deal. Not available in North America.

[@MICKSHRED]

@@AndyTheKenworthGuy why is that?

[@AndyTheKenworthGuy]

No idea. That’s beyond my pay grade.

[@tpjkgj]

Nice video, nice truck.... how much??

[@AndyTheKenworthGuy]

It’s approx $180,000 cnd depending on options

[@tpjkgj]

Thanks

[@AJDeere]

Beautiful truck but not a big fan of Paccar Cummins all the way :P

[@AndyTheKenworthGuy]

Good thing we offer both. Cummins has been a good engine for us!

[@johndavolta3124]

It is unacceptable that it doesn't have a proper ladder to get to the bunk bed. Disappointed

[@johnhull6363]

My wife would be great working as an airbag....Hiring?

[@AndyTheKenworthGuy]

Be nice .

[@mgp-bct7723]

I custom order my truck T-680 2019, and it’s a junk , special the customer service I think is the worst in the world :(( , I have the truck 10 months and I’ve been in the shop almost 4 months :(( , A lot of rattling squeaks and noise and the wind blows true the doors they fixed 3 times the doors and still the winds is blowing true, and they already change it the PDF, oil seals, injector seals , thermostats sales & And a lot softer issues with dashboard with the engine & transmission to, only one problem the KW they can’t fix their own trucks :( the customer service are sucks:((( my advice stay away from KW & Paccar technology :(( shame on a Kenworth & paccar :(

[@crocket1971]

The Paccar MX (Daf MX engine) is know as a reliable engine! Paccar has adapted this engine for the US market! Don't change a good engine!!!

[@JamesDuphay]

Andy sent you an email my friend FYI chat soon.

[@AndyTheKenworthGuy]

Got it! Tanks James!

[@mgp-bct7723]

Paccar is a junky company, I bought 2019 KW T-680, and in 7 months 80,000 miles, I was total all ready 2 months in the shops :( and change anti-freeze seal injectors Seal and oil construction in 25,000 miles consum 3 gallons oil:( and they change the seals and they screwed up my fuel-efficient from eighth and 8.1/2 mpg to 6.1/2 :( they killed there own Engine:( and had a lot a rattling and the wind blows on the truck and there are shops they can fix their own trucks , that’s how rape of , my advice stay away from Paccar Technology

[@riseagainstfb]

More like a t-700.. whatta sham the t-700 came out then this came out and i love the arguement oh .. it doesnt look like a t-700 lmao

[@AndyTheKenworthGuy]

Did you like the T700/T2000?

[@TacticalTrucker]

The t700 Is a very beautiful and flush aerodynamic truck it’s bold and elegant

[@bobbyjackson8671]

stay away from pace car cummins all the way .

[@johnhull6363]

Fridge on floor ugh......never buy it

[@AndyTheKenworthGuy]

Where would you prefer it?

[@johnhull6363]

Up off the floor...countertop...389 like....nothing worse when your pushing 50, arthritis and tired and having to bend over everytime you going to fridge ...it's a fucking nightmare....

[@AndyTheKenworthGuy]

We do have it about 7-8” off the floor. With he drawer style fridge it all come out. Not sure where else we could put it in the current design. Thanks for watching and commenting.

[@johnhull6363]

They are beautiful, well made trucks but that fridge is a deal breaker

[@Jimbobd421]

John Hull that refrigerator is perfect. Love the pull out design. I’m 60.

[@kevinwatson4935]

How much would this machine cost?

[@AndyTheKenworthGuy]

Depends on spec and options. Send me an email and I can discuss with you there. [e-mail]

[@kevinwatson4935]

Andy The Kenworth Guy oh, I'm not in the market. I own PACCAR shares and love the industry, but I have no concept on the prices.

[@AndyTheKenworthGuy]

Gotcha, Ballpark pricing is $165 -$200k Canadian dollars

[@kevinwatson4935]

Andy The Kenworth Guy all things considered, that's a great price for such a complex machine. You in Canada?

[@kevinwatson4935]

Great videos. Enjoy a lot.