3M Command Jumbo Utility Hook

Рет қаралды 49,053

Күн бұрын

Пікірлер: 38

@denzamarie1 Ай бұрын

Sweetheart I am so glad you made this video. I was stuck and did not know how to proceed. Your video helped me tremendously. Than you ❤

@chelastrayer7433 3 жыл бұрын

TKU for your presentation; it has been very helpful; without you showing the steps to install the command hook, I would have been afraid to pull it off and then place it back on. I am sure most people felt this way.

@maxnguyen3503 4 жыл бұрын

Everyone gangsta until you have to look up how to hang a hook.

@hhqh2007 6 жыл бұрын

Very good job of showing how to install the Jumbo hook. I was struggling until I saw this. Thanks, Kev.

@Ray-es2zj 6 жыл бұрын

Good job, I think you will find that the Command hooks hold on very well, especially when you take the time to do it right like you did, great job. The first test hooks are over 20 years old and still going strong.

@ohikennedy 4 жыл бұрын

I like that this actually shows all the steps you need to go through, INCLUDING those "Waaait a minute, what the....?!?" moments. ;-D (FWIW I really don't see why they tell you to separate the adhesive strips then stick them on side-by-side; other vids say to peel the backing off 2 tabs as a unit & it works just as well.) Thanks for saving my project after the back of the package got defaced so the instructions are illegible!

@gen3703 6 жыл бұрын

Thank you for this video! Was wondering how the thing would pull up and off. Glad I found this!

@tcb0515 3 жыл бұрын

Great video. Thank you so much. I have the older nickel hooks, and mine don't have backs, and so far I can't seem to make them work again in a new location. I'm going to see if I can find the older instructions but yours are awesome for the newer ones.

@karynramona5446 5 жыл бұрын

Thank you for this! Took your time and was helpful for me.

@laureldreinking 8 ай бұрын

I followed your example, and I was able to put the hooks up appropriately. Thank you!

@KevCentral 8 ай бұрын

Mine is still going strong 💪

@laureldreinking 8 ай бұрын

I affixed two of the jumbo hooks to my wall to hold my iPad when I’m not using it.@@KevCentral

@jen0718 Жыл бұрын

Thank you!! Just installed one in my shower for a shower rack.

@danabugtong8342 5 жыл бұрын

Thank you for your detailed tutorial! Worth the 9 minutes lol

@John-ph8rq 3 ай бұрын

Thanks for the instruction!

@Sarumanthewhite888 10 ай бұрын

Thank you sir 🙏🏻🙏🏻🙏🏻

@S4Daves 3 жыл бұрын

Why do the instructions make it seem way more harder than it looks

@AppyKumari 3 жыл бұрын

Is it still working fine? Did it ever break?

@KevCentral 3 жыл бұрын

Nope. Still in action holding up a folding step stool

@Mindsetolympics 5 жыл бұрын

3M is genius

@armughanaymen3916 3 жыл бұрын

Is this hook wide enough to hold a curtain rod? These are the only large ones available in my country

@KevCentral 3 жыл бұрын

How far off the wall does it sit with the ends on the curtain rod?

@valerieblackthorn13 3 жыл бұрын

Can it be used to hold curtain's rods?

@KevCentral 3 жыл бұрын

I don’t know what the humidity from a bathroom would do to adhesion

@MBoyer-ng6ok 4 ай бұрын

And what no one seems to tell you: do not install up under an edge or lip as it needs to slide up to release! It is tempting to push up against the ledge of a counter or shelf to get straight or lined up, but then you cannot slide it off for the 30 second part or for removal. So 3M.. Add in ALL CAPS BOLD--INSTALL SO IT HAS SPACE ABOVE/BELOW TO SLIDE OFF. DO NOT INSTALL FLUSH to shelf, lip, ceiling, etc...Nothing about a suitable site for the hanger on the back of my product.... So you can't get the 30 sec push or ever remove...