how to make an Rc Glitch Buster And Why you need one

[@shakejones]

Great video+explanation+presentation! Thank you for sharing! Well done mate - NEW SUB 🙏🏻

[@KevinMillard68]

thanks bro

[@SusanMillard]

Thanks for doing the research and fixing the problems with my Traxxas Summit for me using this. 😎👌These little guys actually work! 👍

[@KevinMillard68]

your welcome

[@ronniewilliz153]

Yes they do glitch busters an cap packs for the 6s n 8s bashers is what i use

[@KevinMillard68]

@@ronniewilliz153 :) cool

[@TW39]

Can I put the glitch buster in any receiver channel on a rc car 110scale can i use a 2000uf 10v

[@KevinMillard68]

you haev to use the channel as sudjested in my video and you want more then a 10volt cap other wise you can blowup the cap you can use the min as sudjsted or higher but you cant really go lower in the uf

[@TW39]

@@KevinMillard68 will 12v be ok

[@TW39]

Hi because I'm using a 10v 2200uf on my rc car for a while now servos been stuffing out I don't know if it's because off the glitch buster or to much stress on the servos they heat up I'm thinking it's the stress

[@TW39]

Hi can I use a 16v 3300uf or a 16v 4700uf on my rc car 110scale with a 2s 7.4v lipo batterie will that be ok

[@YesIgen]

So it doesnt matter what Voltage the capacitor have? If my transmitter is rated for 11V max then can i go over 11V with cap? I have pretty fast 30kg brushless servo in my crawler but sometimes it just doesnt work properly and im guessing that one cap on my hobbywing 1080 esc isnt enought.

[@KevinMillard68]

go back and watch the video again so you understand what we are doing here

[@IRFebi]

I have a mn99s rc, with standard esc condition using 7.4v 1200mah battery . i am having the glitching servo problem , can i use 1pcs 10v 2200uf? where should I connect the part, is it after the power supply line to esc or esc before the servo line?

[@KevinMillard68]

follow my video and you good to go but i would go with higher voltage cap/caps

[@IRFebi]

​@@KevinMillard68how much voltage and Capacity you suggest for solving my glitching servo problem? I am using jx pdi-1811mg servo which is running at 4-6 Volt, dont know the requirement current as the Factory didn't write that..

[@nieko3038]

Interesting. Futaba sells 1800uf I saw. There are rc webstores even selling 500uf glitch busters. I have a 1500uf 16v laying around. I want to try that. Local electronic store doesn’t sell the ones I read about. They do sell 2200uf 25v. Don’t know if higher voltage can be used. At least I don’t see them in their website. Having jitters in the servo after installing a gyro.

[@KevinMillard68]

you can use higher voltage its ok

[@nieko3038]

@@KevinMillard68You are fast answering. Thanks. I’ll go get one of those.

[@Hirthirthirt]

I have upgraded my Revo 2.0 to two JX 36kg servos and have zero problems.....they are super strong...could be faster especially since I went with 2 but they are super strong. Would my system still benefit from this circuit? Would it make the steering even more powerful?

[@KevinMillard68]

results vary

[@jujucattys156]

i just spent 4month trying soert my plane out with zohd fc 9gram servos desided try this hay presto worked spent loads on new parts trying figer issue had 2 these in box lol

[@KevinMillard68]

:)

[@AeroStuffFPV]

Can you use multiple glitch busters?

[@KevinMillard68]

nope but you can make a more powerfull one

[@AeroStuffFPV]

@@KevinMillard68 wow alright. why not actually? Many say it's more beneficial.

[@KevinMillard68]

@@AeroStuffFPV you only have so man slots on the reciver to start with , also i have never head of anyone using more then 1 buster you can use 2 if one is on the main battery wires and one in the revicer but it makes no difference if you use 2 of them how ever do what ever you want but one is the normal and its either on thebattery leads or on the reciver in an empty channel thats hows it done ,, its the servo that benifits from the buster if you need to add caps to a motor you use ceramic caps not electrolitic caps.. noting elese needs caps at all so why would you use more then 1 buster if its just ment to benifit the servo more then anything else ..

[@nikolajc7617]

@@KevinMillard68 Where did you hear that you use ceramic capacitor´s for motors???????????????????????

[@RAFERRH]

@@nikolajc7617 yes they always need caps, so emf created by motor does not radiate and interfere with the receiver or servos

[@ayyhmed]

Can i use a 1000uf 16v capacitor? Someone please help

[@KevinMillard68]

as long as your not going past 12 volts then yes.. once you go past 3s aka 12 volts then you have to use a higher voltage cap and they have to be electrolitic capasitors like shown in the video

[@ayyhmed]

@@KevinMillard68 ok so heres my setup. Im using 4 SG90 9gram servos in total on a flysky fsia6 reciever. The BEC on the esc is 5v. I wish to connect the capacitor on an empty channel on the reciever to stop the servos from jittering. Is this possible?

[@KevinMillard68]

@@ayyhmed whats the amps of the bec tho and whats the esc intstalled in and whats the motor or motors draw in amps as well . and what do the servos draw in volts and amps