Kidde Carbon Monoxide Alarm Review

[@joank4971]

You told me exactly what I needed to do. It was actually easy, but the User's Guide was overwhelming to me. I appreciate your help so much. Thank you.

[@musicspinner]

Also, the user guide isn't totally clear.

[@billcherry5852]

You did an exceptionally good job explaining how this darned thing open, plus how to set the thing up and read. Thanks. Kidde owes you a BIG CHECK!

[@A.C-i2d]

I am getting a dot with a "0" appearing every 0:60. Also when I plug it into the wall without the battery I get nothing. Can you tell me the problem if you know.

[@BrettHondow]

I was hoping to find out why mine screams like a 5 alarm fire whe I plugged it in for the first time. Nothing in the manual for that...

[@mimisaleh5182]

SAME IT WAS SO LOUD

[@stacy6291]

Mine did that at 4:30AM this morning, and read gas! I didn't know whether to be concerned or not, grabbed both cat, put them in a cage and called 911. It was a false alarm! But I also wonder, because earlier during the night I woke up feeling nauseous with an upset stomach for no apparent reason

[@Firebash9]

@@stacy6291are you alive those are symptoms of carbon monoxide poisoning

[@MrSigh]

4:47 I just bought the same model. In the User’s Guide under section 6 Peak Level Memory, it says “Although the Peak Level feature WILL display levels below 30 PPM, these levels will not result in an alarm no matter how long the device is exposed to these levels.”

[@sarkahajna2958]

Thank you for helping me how to open the battery compartment, could not figure it out without your video.

[@hoofaa17]

I ordered this model from amazon after I saw that they should be replaced every 10 years and ours was 22 years old.

[@kellygoodlad2143]

What does it mean if you press TEST and it flashes and then beeps 4 times and displays 232? But once it stops it says 0?

[@neelycarbone]

Mine did the same at 214 but its been plugged in for 2 hours now and remains at 0. Should I be worried?

[@Chironex_Fleckeri]

It's fine. It's an absolutely moronic design choice - For paranoid people like me, anyway . Just had to change the batteries on mine. It gave "Lb" "code. The unit is excellent but yeah, very bad choice of reading out a test display number on something we touch once every 5 years. So when you press TEST on this model, it runs through a sequence: 1) 888 (chirp) 2) 2xx (chirp chirp chirp) delay... 2xx (chirp chirp chirp) 3) 888 4) returns to standby The manual says "this is not an actual reading"... it's just simulating one. Again, I'm angry that they'd even do this

[@icemancometh8679]

This comment helped me the most because I could compare it to what mine was doing when I couldn't figure out what it was doing, ha ha.

[@tribulationprepper787]

HAVING TO PLUG IT IN IS A NON STARTER FOR those who will need to monitor emergency heat sources during a winter blackout. Is there a high quality battery operated unit available?

[@paulinewoods375]

I have a Kidde carbon monoxide alarm ( model 10LLCO). It definitely saved me a few years ago. It has now come to its end of life , bleeping every 30 seconds or so. I have just ordered a new one so need to wait on delivery but I cannot stop the existing alarm from bleeping. There is no silence button. If I hold down the Test/Reset button it stops gor a short time and restarts again. Cant listen to this for the next few days or I will be ready for the funny farm 😅. Would definitely recommend having an alarm. I accidentally forgot about my dinner cooking away in the oven, kitchen door was closed. I was in another room , the irony was I was checking out new kitchens online. Hear bleeping but knew it was not my smoke alarm which is in a different location in my house. I thought it was the tv program until I happened to change channels. Came out to find my kitchen totally full of smoke. Could not even see the main cooker switch on the wall to switch it off, had to feel my way along the wall. Any ideas how to stop this alarm bleeping ( it has a fixed battery so cannot remove it)

[@josecolon6584]

My I run my generator outside .with a fan on goes up to 31 it's that ok?

[@emberN]

Haha! THANKS SO MUCH! we bought ours over amazon. we haven't tested it yet BUT NOW WE KNOW HOW! we were too worried about beeping and stuff because we are just renting. This video still helped us get over that sound and how to test it and such. Thanks so much!

[@patridomino9036]

It should be mounted FIVE FEET above the floor. Most outlets are about 1 foot above ground. [CO is slightly lighter than normal air mix, according to experts, contrary to current myths that it is heavier. ]

[@Zincink]

Yes, that is what the firemen told us.

[@ranger178]

it does not matter it will go off anywhere the gas stirs around in air they say put it at 5 feet so you can see it and because that is where you breath mine goes off for someone bumping a gas knob on stove all the time with real low levels in next room away from kitchen. but mine detects flammable gas and CO

[@dawnbowersferrara]

Thank you! I have this one for years and love it. It started beeping and I didn't know why. I replaced the battery inside and it is perfect again!

[@redleo2991]

Thank you so much for posting this! I could not figure out how to remove the back of the alarm to install the batteries. Watched your video and it was so simple. Plus you mentioned that the alarm will sound when the battery is installed. Good to know, as that would have made me jump if I hadn't expected it. Again, thank you!

[@Entropian2012]

I have a plug that is in the center of a wall would that be fine to place or does it need to be close to the top or bottom?

[@justahuman4862]

You ever reviewed kiddie firex gas + carbon monoxide alarm?

[@chloeanastassiadis9530]

Thank you so much I went through so many videos hoping someone would show how to replace the battery! That was super clear and helpful!! Also fun demo 😊

[@Fredengle]

why did you not read the directions?

[@crazybutler8765]

I'm having a bit of struggle with this, but what's the difference between 4 beeps and 4 bips? With 4 beeps, does the detector start beeping?

[@crazybutler8765]

I just woke up this morning so I'm a little slow, I apologize about that 😅

[@GC-jk6zd]

I’ve always heard you should put a carbon monoxide detector down in a low outlet and a smoke detector up higher because c. monoxide gas stays lower and smoke goes higher. That’s why combo smoke, carbon Monoxide units don’t make a lot of sense. Is this true? Thank you for the video… you helped me figure out where to put the 9 V battery LOL

[@dylanrendon5097]

Contrary to popular belief, Carbon monoxide isn't lighter nor heavier than air, it will actually spread among existing air, therefore technically you could put these detectors on the ceiling or down on an outlet. Now what I don't know is if Carbon monoxide follows the whole, hot air rises and cold air sinks rule. But since it does spread among air I would assume it doesn't, or at least not very well. But that's what I've learned.

[@jellyfishedx]

I checked the highest reading and it was 105. Not sure when that happened. But, I decided to test mine. I stuck it directly on the the gas stove burner with the gas on but no flame. I left it for 1 minute. I can smell the gas but this thing stayed at 0 the whole time. I think with it on the stove and it going right into the detector it would Alarm. I checked the highest reading and it was still at 105. My testing could be flawed but I'm having little faith in this CM detector now.

[@vsxtir]

are you okay now?

[@dylanrendon5097]

These detectors aren't ment to detect propane, methane or natural gas. Not this type anyway. It can only detect Carbon monoxide. They do sell duel Gas and Carbon monoxide alarms but I recommend the kidde nighthawk version as the first alert versions gas sensor doesn't seem to work

[@karenconstantine334]

Where do you place the detector

[@Deangelo21530]

Here is a good way to test it out. Try using a lighter. Press down on the lighter without igniting it, then It will release butane gas.

[@mando074]

This a great video, thanks. Can you do a follow up video to see how it's doing after 5 years? Also, is it better to place it higher than the outlet? I've heard that it is but just want to confirm.

[@kempoutzzz]

What levels/min is not good for human in a car?

[@socorroceniceros175]

Just bought one and really hard to slide back down

[@kiranakhtar1952]

Thank you so much . Such a great and easy explanation and the demo👏👍🏽. The user guide was a little overwhelming.

[@darkfarie94]

Will it make an alarm sound if you try to remove it from the wall?

[@dylanrendon5097]

It's not supposed to unless it has a low battery

[@gwenfaison8070]

Thanks for the easy steps to open the back panel. Great video

[@CollinEichinger0221]

Is there a way to link this to kidde smoke detectors. That way when the carbon monoxide detector goes off, the smoke detectors upstairs beep too?

[@75FordDangerRanger]

Collin Eichinger no

[@katkaae9534]

Have had this same CO / GAS detector for 3 years. Tonight all of a sudden it went off saying gas. Theres no gas smell at all. I had just shut off my tea water on my 3 year old gas stove. When does that battery need replaced? And how do I replace it?

[@ItsXxgrandproxx]

Kat Kaae CO DOESNT HAVE A SMEL

[@zzzzzzzjsjyue2175]

@@ItsXxgrandproxxlmao

[@dylanrendon5097]

We had a similar incident a few months ago, only it was just before bedtime. We ended up having to replace it as it continued to go off ever after replacing the battery and cleaning it.

[@rashaqqsellassetheproet5397]

I don't usually leave comments but I have to. First of all, you are funny as😂..video is thorough, very informative and useful. Useful 👌

[@villa_8053]

Is it fine if in like a year the peak number is only 17 but usually sits on 0?

[@kathrynforester2676]

Very confusing instructions. 2 of us read the manual several times and still confused. Brand new out of the package and the "low battery" voice came on. We figured it would take time for the battery to charge so listened to the voice for a while then decided that wasn't it. Re-read the manual. Holding the 'test/hush' button did nothing. The only thing that made that annoying voice stop was pressing the button in the back. Very unclear instructions. This stopped the nagging message but we are still unsure if this just turned of the nag forever or if this is what we were supposed to do. We also didn't hear any message about the "Hush" being active. The manual calls the back button "Deactivation/Discharge Switch" which had us believing that the low battery nag was deactivated, which we wouldn't want close to the end of the life of the unit. Totally horrible manual; needs to be rewritten more clearly! Very frustrating and still don't know for sure that the unit is working as it is meant to.

[@Misty610]

Need would have got the battery door off w/o your help. Almost wasn't strong enough anyway!

[@EpicReviewGuys]

Glad I could help!

[@heatherbailey-hill9141]

I just actually tested mine and I use the cigarette and mine came up with 12 so I guess it does show under 30.

[@eddyhaze8239]

mine is not even 8 years and is showing end of life beep ?

[@MyVapeBlewUp]

Faulty ^

[@catrinalynne]

It's a law in new York to have a carbon monoxide detector in the house or apartment. I've always had one. very good to have indeed. also I've used a pet seat belt before they are great!

[@EpicReviewGuys]

+Catrina Lynne Not required here in Austin, but a really good idea.

[@boss_diamondz1783]

Mine is so scary cause when we had a black out it kept on beeping for 1 minute everytime and it's so loud I was close to the alarm cause my bedroom is close

[@felz4468]

Catrina Lynne has

[@tribulationprepper787]

The corrupt NY Governor's son-in-law probably started selling these things just as the law that forces you to get one was enacted.

[@nellfields9659]

How do you reset it after a power outage

[@fiddlefaddle1]

sorry that no one responded. If you're still not sure, push the test/ reset button and hold it down for 5 to 8 seconds. The display will reset to 0.

[@ethanmacias7287]

I have that Carbon Monoxide Alarm in my collection

[@cibrostacun]

I bought 2 of these after 1 week of use both show 214 Lb flashing and beep every 10-15second,just weird to me!!!!!

[@SpottedDino]

Will you do a Lazer Bond product test?

[@EpicReviewGuys]

+TheAnaquintero Yes, I have it here- just need to do the video.

[@Markandrewk]

My Detector which is the same in this video is reading at 28 which under 30

[@a2theb46]

Your video was very helpful

[@gregorygeorge1094]

How is the battery life? Does anyone know if it has to be plugged in?

[@germeister6917]

Gregory George this model will show Lb 'low battery' & must be plugged in. Its power plug is removable and has an extension cord so that it may be set up higher.

[@HawkinsWX]

My detector has three straight lines going across what does that mean

[@denisecizek7620]

I have the 3 lines too. what is it

[@winnifaulring2945]

First class presentation.

[@vincenzollamas]

thanks! great helpful review

[@kasparovthegodofwar]

I put mine in the exhaust of my car and it still read 0 WTF?

[@jc8067]

I got the cheapest version. I tried close to my stove and worked instantly. I tried with a burned piece of paper it didn’t work. I’m okey with that, cause I already have a smock detector.

[@Trainman0401]

Hold it near the exhaust from a car and watch the numbers jump!

[@rossacohen314]

Great video, Parris! An idea. . . Put the carbon monoxide detector near the exhaust pipe of a car and see what happens. Also, where are the girls and Rainy Day Dreamers?

[@EpicReviewGuys]

+Ross Cohen I tried that- held it right in the exhaust for 30 seconds- but nothing. Cars these days really do pollute less!

[@josephmose8975]

+EpicReviewGuys I held this same model against a tail pipe and it read 487 and no alarm

[@reggiedwyer1461]

Thankyou for the video , so you just plug it in the outlet and it's ready to go

[@nickfanzo]

The batteries on these things always seem to die in the middle of the night and scare the hell out of you while you’re asleep.

[@ChaoticKev107]

is it a probably when you press test and it says 226 and then goes to 0

[@uypham1108]

Chaotic Kev I have the same issue. When I press test/reset, it show 213 on the screen. Then it come back to 0. I don't even know how it's gonna be...

[@Stemmer94]

Kev.5 x Any time you push the Test/Reset button the alarm will go through a series of test numbers that are programmed into the unit to test the internal diagnostics of the unit. This will start with a 888 reading, then display numbers usually in the 200 range, then back to 888, and lastly to zero. These are not actual readings, so you do not be alarmed or take action. The Peak Level reading is just a memory. At one point the unit was exposed to something that caused the reading. It could have been a substance that was sprayed too close to the unit, paint fumes, or actual carbon monoxide that caused the reading.

[@neelycarbone]

This was exactly my question! Just bought mine tonight and test says 288 then 214. But screen sits at zero for 2 hours. I am relieved to read this! Thank you!

[@elodiehawkins1285]

@@neelycarbone me too!

[@michaelclatecki8157]

what happen to the other guy who used to help you with other videos?

[@EpicReviewGuys]

+mike latecki That's my brother. He went on to KZbin fame and fortune as an ecig reviewer.

[@conservativeamber1216]

Many of these Carbon monoxide detectors give up False readings which is very Annoying.. Near the Gas Furnace is the best place to Plug it in.

[@spcraleigheas]

i hate this thing. i have it and my sisters stupid dog ran into it twice and broke it. then it sat in my dads office for a while. then i was just playing in my room ( my dads office is at the end of the hallway where my bedroom is. then it started beeping randomly.

[@phagusandjiet4872]

CO right ?

[@EpicReviewGuys]

+phagu sandjiet Yes.

[@musicspinner]

Thx. 👍

[@svddwd]

I think we should put it in kitchen to detect any gas leak even though the instructions say not to.

[@zanarothbloodfin7874]

Very Epic review! thanks.

[@EpicReviewGuys]

Thanks!

[@user-yk5lv8iw8x]

@Starts at 1:22

[@icemancometh8679]

Alright, everyone here should post their high reading - mine was 79!

[@deneenbutler4283]

Whew thank you I need to see how open the back😂

[@3schnauzies]

Need one with a ten year battery

[@TheRemnant8]

I clicked on peak level button and nothing happened

[@issabalderas9884]

Exactly what I needed

[@tribulationprepper787]

HAVING TO PLUG IT IN IS A NON STARTER FOR those who will need to monitor emergency heat sources during a winter blackout. Is there a high quality battery operated unit available?

[@JY-tq4ir]

i'm using this one, thank you

[@speakingtonganwiththetutuu8421]

Thanks

[@hunnygirldubstreet]

Thank you!!!

[@shirleymills3566]

Great video

[@candulagirl7817]

TY for your video! Wanted to replace a battery on my Kidde carb. mon. device but only could after I saw your demonstration!

[@kevinavasquez16]

Thank you really helped

[@coleantrobius8427]

Mines only hit 11

[@EpicReviewGuys]

That seems like a good thing.

[@kvvijay]

Nice video. good useful review

[@kymarah]

Soda has lots of carbonmanocsid

[@luccacerminaro8003]

Hey I have this at my house

[@onursar1751]

hi

[@ranger178]

that thing is crap it alarms when ten years old to tell you it needs to be replaced rather than just putting a light or something on display saying to replace it I will buy one only if it is not going to be stupid again.

[@diegoestebandagatti4150]

I bought one in canadian tire, I'm gonna return it.

[@Silly-g]

I have these in my house

[@Silly-g]

But it has a “explosive gas alarm”

[@littlemonster1556]

what does it do? why do we need one in are house?

[@robinhood4640]

@@littlemonster1556 They are for going beep beep beep when you least expect it for annoying your neigbours and stopping you from having an afternnoon nap.

[@victorzuniga7200]

Hi

[@stevearle]

Anyone else think these moronic, overpriced, complicated, user-unfriendly products are ripe for another company erasing them from our collective memory with an alarm that simply needs a new 9 volt every year and we actually look forward to this now 30 second chore?!?

[@Airbus_A.320]

Well then again kidde is not a very dependable brand. You’re better off its first alert

[@bambamcam1758]

or they just faimly

[@iangreenberg5101]

I have a smoke detector close by I might have a situation with hahahahaha

[@OnTheCodeOfficial]

No he didn't see his shadow I swear not be rude ;3

[@EpicReviewGuys]

+Mrfight You are right. I watched it live and I saw his shadow- so I assumed he did, too!

[@OnTheCodeOfficial]

Alright I don't wanna start a fight I been subbed to your channel for a long time and I don't wanna be rude to you I'll just agree ;3

[@EpicReviewGuys]

No really, I was sure I saw a shadow and I didn't wait to hear the proclamation of the guys dressed all fancy. So I am agreeing with you.

[@OnTheCodeOfficial]

Oh ok I was scared at the moment there Sir I have a Channel my self but my editing is just insanely horrifying

[@phagusandjiet4872]

+Mrfight so what happened ?

[@OnTheCodeOfficial]

Alright I don't wanna start a fight with someone so awesome like you. I just agree you we're right I was wrong ok?

[@timherwig9709]

Unless you have the strength of a Gorilla it's virtually impossible to get to the battery. What a piece of poorly designed, user unfriendly junk.

[@channelnolongerused9610]

3rd

[@htown6527]

first