How to do an F30 M SPORT CONVERSION | Front Bumper! The BEST F30 Mod??

[@sakii11]

Bro you are the only one on youtube who gives such a good step by step instrucion videos!! You dont hide anything! Good job !! Keep up the good work!

[@Mrmikeloc24]

Some things to be aware of when doing this project: 1. The brackets and plastic pieces that snap into the back side of the bumper may be difficult after getting the bumper painted. Try to remove any excess paint from the clips before you try to snap in the fog brackets. It will make your life a lot easier. 2. Have a can of penetrating lubricant on hand because many of the screws will be seized, and some of the screws have red loctite on them. You can’t use heat on those bolts to loosen the red loctite because the screws go into thin plastic and you don’t want to heat that up at all. 3. Have a bunch of extra fasteners on hand because you may find you’re missing some when you start taking things apart. 4. Be prepared for this job to take a full day. Don’t rush any aspects of this or you’ll regret it. It took me and a buddy 8hrs to do this and we’re both mechanically inclined. Aligning the bumper, the headlights, and making sure all of the gaps are as close to factory as possible will be the final stage and will take a while. We spent a full hour making sure the panels lined up and that the gaps between the panels looked factory. The end result looks awesome, but just know this isn’t exactly easy or fast. Good luck brothas!

[@pynacl6798]

Already have M Sport but watched it anyways. Your filming, editing, audio & attention to detail are perfect man, keep it coming!

[@cubeman95]

Thank you so much for this understandable DIY video! I just did the install today and it turned out great, and I don't think I could have done it without this. Hardest parts were definitely clipping in the fog light grates and the intercooler shroud.

[@pinoyboy123]

big fan from TX here! you guys really make me want to get an F30! have an e92 right now and looking to upgrade. Keep up the great work! I wish I still lived in Jersey. haha

[@Goose619]

Eric Huliganga same

[@TheDarkForce187]

From my two years of being subscribed, I just want to thank you from the bottom of my heart for this video 😂

[@sttm1283]

13:41 damn i was wondering today when checking in on all the spares i had for the bumper what that was for. manage to ruin some part of my frontbumper a week ago. had to go watch a few clips again to know what i was doing when repairing :D. as always. your videos are very informative.

[@luizy95]

Iv been looking to get the m sport conversion but it seems that no one makes it with the side camera view. Any help on finding one

[@ef20syxalag]

Hey! Could you please do videos on M brake conversion as well as a halogen to xenon/LED headlight conversion? Thank you! Awesome videos, been following for months! :)

[@Steveindajeep]

Second that. M Sport brakes please! You can even do my car im near Allentown lol

[@04corvetteguy]

already planning on doing this mod. Already have the side skirts ready to install! Next is the steering wheel and LSD, to make my own ZHP - X Drive. If BMW won't build it, then I will have Bryan build it!

[@ShowMeWhatINeedToKnow]

@3:40 -- Some 328i cars have duct work to an aux cooler, as well.

[@francescosaadeh357]

Cliff is sooooo happyyy

[@KiesMotorsports]

😁

[@francescosaadeh357]

@@KiesMotorsports I loveeee your channel one of the best out there if not the best!!

[@matwatson6230]

BBS wheels look amazing 😍😍😍

[@christopheraltamiramo8810]

Hey quick question do you need new air ducts and inter cooler for the m sport or can you use the stock base model ones?

[@Kronoz411]

X2

[@schmidtty6896]

Yes to air ducts, no to the intercooler but you do need a new intercooler shroud.

[@hannialtousy6111]

you need new air ducts, but the intercooler is the same but dont worry about that part because the kit from Kies comes with all the necessary components you need for the conversion

[@killakan987]

can you also make a video of a front bumper install with pdc. I am really curious on how that process goes of removing the old sensors and putting them into the new one with the brackets.

[@hermanshelton3660]

I love your content. You do really good work. I just don't see enough difference in the M Sport parts to make it worth the money. You did an excellent job of showing how to do the conversion none the less.

[@tlbern7710]

You make it look so easy

[@NN-qb5ru]

great , detailed, well explained content and day by day improving. thanks!

[@m.performance]

11:05 kevin de brune after finsihing his match ( bro looks like de broone)

[@_freak_gamer_]

Finally the video I was waiting the most 😍

[@msumzam]

I love Kies Motorsport. I wish you had a short in South Africa.

[@zafert85]

So you are using the C shaped metal at 13:32 because you opted out of going for the M Front Fender Liner Extension right? Because the M version of the Front Fender Liner Extension, goes a little up under the air duct, while the Non M Front Fender Liner Extension that you kept on the car goes straight

[@aussierobertson]

Awesome job Brian you guys always do a great job on these vehicles.

[@ryan-dl7pi]

Next video please do a m sport brake conversion!!🙏🙏🙏

[@Dogeyess]

The steering wheel is a must

[@Progamer8012]

the air ducts from 8:05, do they have to be removed? also the one from 8:55? i only have the msport bumper and not sure if i really need these airducts to be replaced. All i have to do is remove that lower brace to have my msportbumper installed?

[@lameahhnig]

did you figure this out, i have the same problem rn?

[@stevenrodriguez1615]

Is there any of these bumpers that have the spaces for the parking sensors?

[@reggiefigueroa5263]

Are all the air duct and shroud parts absolutely necessary for install or are they just for preventative maintenance measures while under there? I purchased a bumper but it did not come with any air ducts or shrouds just cover

[@brandongonzalez6429]

update?

[@kamaldeep_328i3]

I needed the answer to this question to

[@MrTiago2002]

Hello, anyone got an update on this? Thanks

[@528hrtz]

Can I put this bumper on my BMW 320i f30? Does it fit ? Any extras needed for fitment ?

[@deanlopez-brown7973]

Good in depth video....thanks

[@josephzmuda6397]

Also does the kit sold on your website include everything shown in the video?

[@azalusmuraz9524]

Do you need the intercooler strout?

[@rafaeljimenez312]

I was wondering the same thing. I have all the other pieces to it except for the freaking shroud!!! UGHHH

[@lameahhnig]

@@rafaeljimenez312 did you figure out if you need the shroud or not?

[@MrTiago2002]

Hello, anyone got an update on this?

[@josephzmuda6397]

Do you need the new intercooler shroud?

[@lameahhnig]

did you figure it out, im having the same question?

[@MrTiago2002]

Hello, anyone got an answer for this?

[@stackmorefetti]

What kind of power drill should I get to do this install?? A power wrench drill or regular power drill works??

[@dehxyy]

Just bought a used msport bumper, is it necessary to install a new intercooler shroud and new air ducts?

[@confinez555]

Dehxy no. Not necessary if the parts is not damaged it shud be able to fit unless its not oem bcuz the fittings wont b perfect

[@soyodhialam5083]

Can those air ducts be installed after bumper has been put on? Asking as my parts arrived late and I didn't have them on hand when the garage were assembling. Many thanks

[@emilygarcia8702]

Do I need to change the Intercooler shroud?

[@slickt954]

Do I have to buy the assembly? Can I just buy the front bumper cover ?

[@thadoggfatha.]

Hey I know this is long after your video is posted but my kit did not come with the lower support adapter or the spacer. The person I got it from also said the sport line shroud and the m sport shroud is the same ! I’m installing it tomorrow and would like your input. thanks!

[@MrTiago2002]

Hey, hope all is good, did the sport line shroud fit?

[@innickwetrust2]

about to do a conversion right now, did you have to change the shrouds or did the sportline intercooler shroud fit with the m sport bumper

[@Wollopingsage95]

Would the bumper conversion be different for a f30 that has parking sensors?

[@seanchantaracharat9303]

Some of the aftermarket front bumpers have markings on the back of the bumper for the PDC holes for you to drill them out.

[@KiesMotorsports]

We have them with and without PDC :)

[@matildam8732]

Kies Motorsports hi where are you guys located am in nyc would like to change my 440i 2019 front bumper to a m sport looks one

[@AwesomeBro6]

If you were to do a fog light delete what would you do with the fog light wires

[@skillz1855]

How's the fitment on your G30 M5 front bumper, especially where the fender meets the bumper and under the headlights. Does it fit like factory

[@aj2188]

Hello, for the 335i is the same procedure? I know it has an extra radiator on the left side of the bumper...are the new airducts passing next to that extra radiator? Please can you let me know..that's the only thing which i can't seem to find an answer to...and the only thing that keeps me to Dyi-ing this....Thanks, much appreciated!

[@rohitsproduction8556]

Do you keep the stock crash bar when installing it or do you need to change it to install the bumper?? Like is it a must to install a new crash foam bar to fit the msport bumper?? Nobody is making it clear

[@ngyuentru8117]

what kind of lift are you using?

[@kirkcampbell9276]

Hello can’t you please tell me the part number for the front center lower air duct for M sport package.please and thanks

[@RecklezzVeiwer]

I got my m3 style bumper but the headlight washer covers don’t have that clip to hold it down so it just falls off?

[@dedatec]

What's the brand of that elevator friend?

[@Jay_Tsunami_]

Both of the air duct shrouds look the same. I need to order a new one but how do I know it’s the right one?

[@Sw3ggo]

If I have the VRSF intercooler and I took out that shroud in front of the intercooler will that have any interference with this bumper?

[@AntonyK_]

What’s the bolt size for that metal brace? I’m trying to put the stock bumper back in.

[@krisagcaoili8095]

Mine have cameras on the side of the front bumper do yalls m4 conversion kit come with the holes for em

[@victore.4377]

What about when you have front sensors and turn signals

[@sggjose]

I recently had to change the underbelly panel. I'm missing the plastic clips or inserts that attach the bottom of the bumper to the adapter that holds the front part of the panel. Can't find a part number for it. Can you guys help?

[@snipin2nirvana331]

so it is possible to buy a frontbumper with PDC and SRA for a Car without PDC and SRA ?

[@djchuckdee12]

So I have a 328i, I just bought a used msport bumper that does not come with any air ducts. I can take off my old air ducts? I don’t track the car. And can I use my old intercooler shroud. Thanks in advance

[@Mortenstergaard1978]

Do i need new foglight mount? Or do i use the old ones?

[@95Goldfish]

The only thing I don’t like that it comes with a hole for headlight washers even though you don’t have it. Yea it comes with the covers but it would be better if it didn’t have it.

[@TonyJelev]

What is the part number for the new air ducts and the straut

[@confinez555]

Can i know the equipment for removing the bumper the screw that u have? what is it called? im trying to do a little diy for my f30

[@TheSundaeDrive]

I made it in a video 😍 🔥 😂

[@GIXXER404]

I have a 2013 bmw 335i m sport but the bumper dont have fogliht i want to khow how i can convert my bumper whit fogliht

[@cyrickelegado721]

I bought a kit without the spacer that goes beneath.. is that necessary?

[@aleksandarbacinski888]

How does it work if you have active cruise control?

[@renzoplays9332]

Would this conversion work on a 320D 2016

[@cramphal2099]

Hey Brian.. question. I did a conversion a few months back but the front PDC seemed to go haywire now. detecting objects when nothing is there only half the time. It's driving me crazy I even bought the Carly app and adapter to see if i can just disable the feature, but there is no option. Any suggestions?

[@DJRanoia]

I can’t believe that guy payed for the carbon fiber intake. That price is crazy 😜

[@Kingnabor]

When will u guys open a shop down here in California!

[@Mike2310x]

Is this the M sport bumper you guys sell from phase one?

[@sKid-jh3pd]

Awesome video! Question for you ... Can I convert a 2012-18 F80 M3 Style Front Bumper into a bmw 330i sedan 2017 front bumper ? Even if the PDC holes don’t match identical ? Thanks in advance!

[@XxS1l3nTxa1Mx]

Will this work on my 2016 bmw 328xi????? I have parking sensors too

[@ShaxComments]

Hi, please help. I have a bmw f21 2014 sport so the bumper is 2011 to 2014 model original. I want to change it and put on m sport 2015 to 2019, or does it have to be a m sport 2011 to 2014 same as my car model type? Please help. Thank you so much

[@kezboy1]

anyone know of any m sport bumpers with the side camera view holes? Any help on finding one would be greatly appreciated. Thanks! or maybe a video on how to make those holes? (sketchy??)

[@435dame2]

Can you make a video for the f36 please? I’m currently filming my own since they isn’t much support on KZbin. Would appreciate it

[@Grindtime_moneymaj]

These do not come painted if I purchase from your your website?

[@eduardocastro705]

will this work on an f34? just using f34 parts obviously?

[@WhoCastro]

Where I get those bumper from

[@colojr1690]

Can you an m sport bumper on a 318 d sport BMW?

[@boyanmonkeyking5816]

The blue lisence plate is a Chinese one which presents Jiangsu Province😬

[@ifran77]

wish i could see this done on a non-msport G30

[@irGuilty]

How much would it cost in total for this conversion for parts and labour

[@Goose619]

Finally!!!

[@WaleedWahidi]

Are the fog light brackets able to be reused from non Msport bumper?

[@KiesMotorsports]

No, but we have versions of the bumper with fog lights that you can purchase! Reach out to our team at [e-mail] and they can help set you up!

[@neightberry]

Do you all sale the front splitter also???

[@KiesMotorsports]

We do! Here's the link! www.kiesmotorsports.com/search?q=F30+Front+Splitter&type=product?aff=14

[@jacobsimmons7554]

Where do I find the Roundel?!

[@mikefetters6674]

Do you sell an m sport front bumper from your website with the headlight washer holes?

[@jayelectic8017]

can you use your stock fogs?

[@monyrithc]

Where can i buy this screw for the bumper to fender?

[@slow.320i2]

does the m3 bumper fit a 2015 BMW 320i?

[@moretti42069]

Can you reuse the old fasteners ?

[@livedreamrec2464]

Does anyone know the size of the screw that holds the fog light bracket ??

[@albertlubin2127]

Is this bumper CAPA certified?

[@drfabianchaman]

I miss the “go ahead”s

[@gustavocapo905]

Is there any shipping to canada ?

[@endlesscatching6548]

Do you have to replace to intercooler shroud and air ducts ?

[@MrTiago2002]

Hello, hope all is good, did you figure this out?

[@lookmancardeatailing5150]

the bumper of 428i is fit to 328i?

[@trihungnbk]

I’d like to buy a front bumper. What color does the bumper come with? Please answer and thank you for your help!

[@NS416]

Hùng Hoàng No colour. It’s primed

[@grease_witherspoon]

what happend to cliffs finger

[@dcorreadani3074]

Plz make videos of a 228i

[@nycgoon891]

Which bmw f30 was it?