Kiev 88 shutter knob and speeds - part 1

  Рет қаралды 1,819

Exaquir

Exaquir

Күн бұрын

instructions on the right position of the speed knob

Пікірлер: 5
@clairewinters7182
@clairewinters7182 Жыл бұрын
Hello! I was hoping you could help me! I'm doing a CLA of my Kiev 88, following the guide by Steve Ash. It says in the guide there is a gear with a one-way-clutch that should **never** be lubricated, and I can't seem to figure out which one it is. Do you know? Thank you!
@Exaquir
@Exaquir Жыл бұрын
The big winding knob connects to two gears that run the gears of the film magazine. The first gear should be connected to a little hook that prevents it from turning in the opposite direction. Never models have a one way spring underneath the gear, thats why Steve disrecommends lubrication.The other big gear with the cut that connects to the magazine can be lubricated with a drop of watch or clock oil. The big gear also contains a 'lock' that clicks in place when the shutter is wound, providing second protection for the gears 'unwinding'. Good luck with the CLA. :)
@clairewinters7182
@clairewinters7182 Жыл бұрын
@@Exaquir Thank you so much, I hope it works out well too! So the one-way-clutch is actually a spring, and should be along the side wall of the camera, not along the floor?
@martenvonk7873
@martenvonk7873 Жыл бұрын
Hi, Volgens mij kan ik u adresseren in het Nederlands. Ik heb zes weken geleden een Kiev 88 gekocht, welke een probleem heeft met de sluitergordijnen bij bepaalde sluitertijden. Na wat zoek erk kwam ik uw video tegen en vroeg ik mij af of u de tijd en expertise heeft om mij te helpen om een oplossing voor dit probleem te vinden. Alvast hartelijk dank!
@Exaquir
@Exaquir Жыл бұрын
Dag Marten, bedankt voor je reactie. Het lukt me niet om ern privé bericht te sturen via KZbin. Je kan me vinden op het analoog foto forum als Mschekkerman. Als je me daar een bericht stuurt kan ik je de nodige adressen en adviezen geven.
Custom Transformer Shatters All Voltage Records (ft. 3D Printing Nerd)
21:23
This mother's baby is too unreliable.
00:13
FUNNY XIAOTING 666
Рет қаралды 38 МЛН
My Daughter's Dumplings Are Filled With Coins #funny #cute #comedy
00:18
Funny daughter's daily life
Рет қаралды 31 МЛН
Стойкость Фёдора поразила всех!
00:58
МИНУС БАЛЛ
Рет қаралды 7 МЛН
Don't look down on anyone#devil  #lilith  #funny  #shorts
00:12
Devil Lilith
Рет қаралды 46 МЛН
Kiev 88
7:17
Before Digital
Рет қаралды 3,3 М.
КИЕВ 88, САЛЮТ - С (сборка механизма)
17:15
Have you ever seen soldering THIS close?
9:53
Robert Feranec
Рет қаралды 549 М.
We shot a YouTube video about film formats on 35mm film
22:27
Stand-up Maths
Рет қаралды 590 М.
MP3 CDs: a hybrid "format" that never existed, yet was surprisingly common
34:18
Technology Connections
Рет қаралды 671 М.
Honey, I Shrunk the Steam Engine
18:07
Chronova Engineering
Рет қаралды 307 М.
Kiev 88 winding gear position - Part 2
3:12
Exaquir
Рет қаралды 704
This mother's baby is too unreliable.
00:13
FUNNY XIAOTING 666
Рет қаралды 38 МЛН