KING of HexBeams! The VHQ Hexbeam at Hamcation 2023

In this video, I'm going to show you the VHQ Hexbeam, the King of Hexbeams! This antenna is amazing and is built to last in almost any weather or storm. This video will demonstrate the differences between this Hexbeam antenna and other brands on the market.
If you're interested in antennas or want to see what the VHQ Hexbeam is all about, then watch this video and don't miss out on the chance to pick up some amazing signals with this amazing antenna!
Website - hr2.li/vhqhex
★★★Support This Channel and Help Spread the Word about Ham Radio★★★
👉Email List sign-up - hamradio2.com/e...
👉Text Messaging sign-up hamradio2.com/t...
👉Shop Our Sponsors and Coupons: www.livefromth...
✅PATREON: hr2.li/7xziu
✅Shop our Products: www.shop.hamrad...
✅Shop our Amazon Store: www.amazon.com...
Commissions can be earned on Affiliate Links
📻 Shop Our Sponsors 📻
R&L Electronics - www.randl.com
Buy Two Way Radios - hr2.li/7q211
💯Bridgecom Systems - hr2.li/qpfgp
FlexRadio - flexradio.com
BaofengTech - baofengtech.com
-----------------------------------------------------------------------------
Mail: 2150 W. Northwest Highway STE114-1163, Grapevine TX 76051
Thanks for watching!
#Hamradio #kc5hwb #hamcation2023

It's all about the fact that he lives in New England. Our winters can be very hard on antennas; high winds and ice storms take their toll. He designed an antenna to survive New Hampshire weather, which means that it should hold up just about anywhere short of the summit of Mt Washington. (No beam will survive up there, not when those 200 mile an hour wind gusts come along!)

[@wb2rem1]

I have friends that have the VHQ HEX Beam and they are the strongest hex made. How many other antennas have a limited lifetime guarantee. That's why VHQ is king.

[@HamRadio2]

Indeed

[@Thomas-ZET]

Specs look really good, sounds like a buy once and done

[@n9bc296]

I agree.

[@n3ljs399]

Very nice antenna well built.

[@davidray4128]

Nice. If my NA4RR comes down I will buy this. So far the NA4RR has handled 2 good storms and 120kms of wind with no issue. It was only $600 though.....

[@HamRadio2]

I have an NA4RR also, those are well built

[@n9bc296]

My NA4RR held up to many WI winters. The only thing was that the center post did have a lean to it after some 50+ winds slapped it.

[@davidray4128]

@@n9bc296 Seems like the weak point is that abs pipe insulater at bottom of center post. Wish is was solid.VE3WF

[@n9bc296]

@@davidray4128 The weak point on mine was the wall thickness of the center post.

[@davidray4128]

@@n9bc296 As luck would have it, mine failed yesterday. Insulator on post broke and antenna is now destroyed. Hard to believe we were just talking about this.

[@n9bc296]

I have one coming my way.

[@HamRadio2]

Nice!

[@rickjones6414]

Military-Grade is the way to build, wow! ..Meanwhile I'm looking for performance KZbins on this Hex to see a real Ham's with DX contacts, but haven't found anything yet.

[@HamRadio2]

It's fairly new but I'll be making some videos

[@rmonsipapa]

Great to see someone is actually addressing the need for better quality materials... I'd always be willing to pay more for an item that is better built. Buy once and forget about it!

[@HamRadio2]

Yes, agreed. It's sad that more people don't think this way

[@lmy5pence481]

I agree, just sad it dose not reach the 80M band as well, was contemplating one, currently running with a 5,2 &3 element Jagi

[@CC-hk6vy]

Fantastic antenna! De WO8USA🇺🇸🇺🇸🇺🇸

[@KY4TRK]

Nice Antenna he has. Grate job Jason

[@HamRadio2]

Thanks

[@RamiyaAhamed-d1v]

Hernandez Brenda Rodriguez Melissa Rodriguez Kenneth

[@arildoaparecidocosta5729]

A melhor de tudo os tempos parabéns guerreiro bazuka Foz do Iguaçu PR Brasil 🇧🇷🇧🇷

[@HamRadio2]

Obrigado por assistir

[@hrhkenneth428]

For years, a 40 meter kit has been tried and fails, both physically and there often are interactions, especially with 15 meters as you would suspect anyway. The work-arounds have never stood the test of time, or I would have one. Not going to waste my time on a 40 meter add-on as I have put up phased dipoles for 40m. See my set-up on QRZ

[@andrewfiertek5937]

Didn’t you get one at Hamcation to bring home to have K8MRD build for you?

[@HamRadio2]

No

[@josephdone2713]

Will be anxious to see deployment time and how many people are needed to do it. Looks great and sturdy!

[@HamRadio2]

He had one in his booth on display and he said it took him about an hour to build by himself

[@n9bc296]

My last hex beam took just over an hr or so. Installing it on the tower that took a bit since my tower does not tilt. I plan on renting a man lift this time.

[@fourshow11]

@@HamRadio2 I doesn't take long, everything is done when you get it. No fuss, put it together and use it. The only thing to do is make sure you bend the "S" hooks when you are installing them. Take an extra day to paint the fiberglass poles, it is recommended.

[@bigchew3149]

I Want One..

[@millzee]

Sitting on the fence too long for this one and the price increased. I really like this HEX. Set it and forget it. Will there be a discount code becomming available?

[@dawn4833]

Hello, I recently acquired a 45 ft tower and I am researching the beams and the step IRs and just wondering if you could do a video talking about these bigger type rotatable antennas.

[@HamRadio2]

I might have something like that soon but it's hard to make a video without the antenna to test and use

[@josephconover8059]

I use BlueSky Military type crank up mast 46 feet I believe this is to heavy for my setup Joe KA2ZSD Alaska But I love ❤️ have one

[@pyromateinc.6336]

$100 off at Hamvention

[@HamRadio2]

Awesome, I'm planning another interview with him at Hamvention

[@BrendaTaylor-p3v]

Lopez Amy Williams Ruth Lewis Karen

[@arkyump]

The SP7IDX was by far better made than that. It used machined aluminum block for the holders. Unfortunately he died during the Covid and the company closed.

[@HamRadio2]

That's one I've not heard of. Hard to believe it is "much better" though. I'll look it up.

[@benjaminpauza159]

1100 lbs and only deflected .001" ?

[@HamRadio2]

No and no

[@saltire546]

Great antenna and so well made just a pity they look like a uk washing line holder (whirly gig).

[@HamRadio2]

Like all Hexbeams?

[@Screamingtut]

Jason, I still say the BuddiHex is better. Also, Jason up here in Oregon at the beginning of October this year our club is having an ARRL Convention hope you are coming. It is going to be at the Fairgrounds here in Klamath Falls, OR

[@HamRadio2]

The Buddihex is better for portable ops, which is also what it is made for. This one is made to put up and leave, and will withstand higher winds and more extreme weather than the Buddihex

[@lizzyfan1986]

If you are going to pay that much for a hex beam, you might as well go for JK Navassa 5

[@andy2E0JIU]

Looks great but think he missed a trick as overpricing tends to put people off but wish him luck

[@HamRadio2]

"overpricing" is subjective. People who understand quality don't mind paying for it

[@ThinKkBIGG]

1650$ ouch!!!

[@HamRadio2]

There's cheaper options available that will be damaged in storms and you'll have to purchase again, if that's acceptable to you.

[@Factory400]

I could build the same thing for about $4,000 or so in my own factory. Seems like a bargain if you are looking for this type of antenna and don't want to buy another one ever again. If you build it yourself.....count on building a few, doing mods regularly, then re-building it after you discover an un-realized flaw.

[@HamRadio2]

@@Factory400 Well said.

[@BIGD4VES]

Not as good as the G3TXQ and everyone else’s copied it really

[@HamRadio2]

Incorrect

[@lizzyfan1986]

They are well built but very overpriced, IMHO..if you are gonna shell out that much money, you are better off picking up a JK Navassa 5

[@stevest.martin3940]

Do they have a 40 Meter kit for this antenna ? Or can I use another manufacturers 40meter kit on this kit?

[@HamRadio2]

No, they don't have one. Unsure if others will work