Kingbolen BM580 Battery Tester Review

[@ВикторКийко-у8е]

Здравствуйте. Вы знаете,как сделать калибровку по напряжению?

[@watdahel]

This does not have calibration

[@real123]

BTW, It can record multiple test, Just hold the top and bottom arrows at the same time and it will record a screen shot to the internal memory. Then connect it with your USB cable to a PC and download all the screens shots. Hope this helps.

[@AquinoSamuel]

Mine, I can only save 3 screenshots of the screen, although the specifications state that you can record 10 screenshots. Mine can't record more than 3, and if I insist it overwrites images 1, 2 and 3 respectively. Does yours also have this problem?

[@real123]

@@AquinoSamuel mine only 3

[@AquinoSamuel]

@@real123 , The user manual states that the device takes up to 10 screenshots of the screen. It must be a bug. I went to the Kingbolen website but there is no firmware update for this device

[@inomakaru]

When connect it to a PC with the USB cable "Ref Volt is fault" appears on the BM580 Screen.

[@AquinoSamuel]

Mine, I can only save 3 screenshots of the screen, although the specifications state that you can record 10 screenshots. Mine can't record more than 3, and if I insist it overwrites images 1, 2 and 3 respectively. Does yours also have this problem?

[@watdahel]

I think it can record 10 battery tests not screenshots. What's your firmware version?

[@makaveli2tt]

Helpful review. Thanks for sharing.

[@watdahel]

Glad it was helpful!

[@hamidizadi]

If the multimeter section isn't accurate from the start then maybe all your other results will be skewed, such as cranking voltage drop test, running engine voltage test with and without load. But it does have a lot of features that other battery testers don't have. Don't know if it's worth it given the DC voltage inaccuracy.

[@watdahel]

Ya they still haven't updated the firmware after reporting the problem. I would look for another tester.

[@hamidizadi]

Thanks for the quick reply. So I guess you aren't too happy with the BM580 & BM800 units. I've also looked into the foxwell bt705 and topdon bt200. The topdon reviews also show inaccurate results, the foxwell seems good but expensive and it has no ripple test feature. It's tough to find a decent one.@@watdahel

[@ralpholeni433]

ATTENTION ! AS CLEARLY STATED IN THE OWNER'S MANUAL, 12 volt batteries less than 30 amps cannot be measured with this device! So it is not suitable for motorcycles!!!