The Mystery Braid - How It’s Made - Leather Craft

[@KingdomGloryLeather]

What is the Gospel? 👉 kzbin.info/www/bejne/gZ6ui32uaqafjbs 👈

[@martinstults9419]

First time I've seen a basket weave stamp used like that. Very creative, as usual.

[@KingdomGloryLeather]

Thanks !

[@Lorddanielrushton371]

I just found your channel. What a great video. And your explanation of how to make the weave was excellent. Chuck Dorsett would have been proud of your explanation.

[@KingdomGloryLeather]

Thank you.

[@epiphgd4302]

This is excellent. Thanks for making.

[@KingdomGloryLeather]

Thank you very much!

[@orion19117]

Every time I see your videos they always give me a boost to try new things with leather work or recreate what you’ve done! Great video!

[@KingdomGloryLeather]

That is awesome. Thank you 🙏

[@lenpeeters4498]

As always, excellent craftmanship, great explanation and entertaining. Huge fan

[@KingdomGloryLeather]

Thank you very much! Thanks for watching.

[@amandamountainsong6080]

Love the pattern idea 👍

[@ofozdemir]

Thumbs up. Great video.thanks

[@KingdomGloryLeather]

Thank you.

[@darladevries7401]

Beautiful!!

[@danieltabarcea5792]

May Lord bless you and jeep You! Awsome ministry!

[@KingdomGloryLeather]

Thank you.

[@danieltabarcea5792]

Hello. What lather do you use for this bracelet? I tried to make one and I couldn't make the tool marks to haine the dark volour in the undyed leateh.

[@Busyzebracrafter]

That looks amazing 🙌

[@KingdomGloryLeather]

Thanks.

[@thesoodster1880]

Great video. Thank you for sharing

[@kcg3927]

Love the mystery knot. Great video and design.

[@KingdomGloryLeather]

Thank you very much!

[@lcatt236]

Amazing work!😍

[@KingdomGloryLeather]

Thank you! 😄

[@mirtaferrari4675]

EXTRAORDINARY THE WAY THAT YOU EXPLAINED👏👏.GREETINGS FROM ARGENTINA 💙⚪💙👋

[@KingdomGloryLeather]

Thank you very much!

[@mrblue1356]

Going to attempt this, Thank you for the video and inspiration

[@KingdomGloryLeather]

Thanks for watching.

[@mjmcinnesincanada]

Amazeballs!❤

[@KingdomGloryLeather]

Thanks 🙏

[@mylifehardstylzz4020]

Amazing sir

[@KingdomGloryLeather]

Thank you very much!

[@danielwieman9341]

Excellent How it's made!! God Bless :)

[@Luis-dr2io]

Bacán!!! Gracias!

[@jenpatterson8309]

Beautiful ❤ thank you

[@KingdomGloryLeather]

Thank you very much!

[@emilyralte6107]

Best satisfying video ...

[@KingdomGloryLeather]

Thanks 🤗

[@wyattbussard9558]

Hey could you make a video of you making a tooled hunting knife sheath? I’d really enjoy seeing that.

[@KingdomGloryLeather]

That would be a good project.

[@runzeiglerun1]

Great video! Thank you!

[@KingdomGloryLeather]

Thank you

[@SportvanTilburg]

Hi there thanks 4 the inspirational video. 1 question. What is the thickness of the leather in the video. Keep on the good work.

[@KingdomGloryLeather]

Thank you. I think it was around 4 to 5 oz.

[@samanthamillett5343]

What weight leather do you usually use to make your bracelets?

[@tankermanjake]

Would it be feasible to put a backing on it? I’m sure it would be a ton of extra work with stitching everything but I wonder if it would feel better to wear

[@mypintofview]

I liked this video so much, so I made myself the exact same bracelet. The toughest thing was the braiding….😅😎

[@KingdomGloryLeather]

Awesome!

[@robsarchery9679]

Very nice.What is the thickness of the leather.

[@KingdomGloryLeather]

I would need to find it and check. Probably 1.5 to 2mm thick.

[@gr8whytz29]

This is a GREAT CHANNEL.. ❤

[@KingdomGloryLeather]

Thank you.

[@sanjulsanju192]

Big fan form India

[@VladimirDorl]

Крутая работа!!!⚜️👍

[@tommylafon3262]

Can you burnish the edges and dye them as well? If so, at what point would you suggest doing that, pre-braid or post-braid?

[@KingdomGloryLeather]

I’m sure you can. Most definitely pre-braid.

[@jameswilliams4566]

Can you let me know how wide that is? Plus the measurements for the 2 dots below the 1 for the snaps and how far in did you come in from the edge for the 2 lines cut Thank you so much.

[@PeterDeLaurier]

What a great video! Thanks. One question and sorry if it's in the video. The start of you cut lines appear to be a centimeter down from the snap mark. Is that correct?

[@KingdomGloryLeather]

Sound about right. There is no exact measurement.

[@JohnTomasella]

How did the dye not coat the stamping?

[@KingdomGloryLeather]

Gotta move fast across the surface with thin coats.

[@jenniferbauman4802]

Good video. God bless. From Glenn CATT in Massachusetts.

[@KingdomGloryLeather]

Thanks for watching.

[@trappedinroom1014]

Beautiful…really lovely and hopefully I’ll make one (someday)! Do you mind me asking what was that black board made of, that you pulled out to do your punch cutting on? Cheers 💕👍🏻🙂

[@KingdomGloryLeather]

Thanks. I believe it is called a poundo board. From Weaver Leather Supply.

[@trappedinroom1014]

@@KingdomGloryLeather Awesome, and thanks for getting back to me. 😘😁👍🏻

[@SerDerpALot2015]

What if i cut then dye so the edges are the same color?

[@KingdomGloryLeather]

That should be fine.

[@jamiejohnson9520]

How long does it take after you get it down ?

[@ОксанаРадковская-ц6ф]

Красота!!👏👌

[@samuelgolden4648]

One question. Why no finish work on the edge of each inner band?

[@KingdomGloryLeather]

Rustic look.

[@AshasymoConrad]

How many Oz is the leather you used? I'm still trying to get better at knowing what thicknesses are best for different projects

[@KingdomGloryLeather]

Should be around 4 oz. From what I can remember.

[@AshasymoConrad]

@@KingdomGloryLeather thank you!

[@juliangonzales2916]

Saludos muy bien👍👍👍

[@ccmarshall1094]

I bought a mystery braid bracelet (not from you), but it appears uneven. Like 1 side got an extra twist or braid. Is it possible to "unbraid" it and start over?

[@KingdomGloryLeather]

That should be possible

[@ccmarshall1094]

Is there anything special I need to do for the "untwist"? I'm almost afraid it will become just one huge, major cluster-eff or knot, lol THANK YOU for your reply and help!!!

[@seanditch4419]

How do you measure the size correctly?

[@KingdomGloryLeather]

Usually the snap length is 1” longer than the measured wrist size.

[@seanditch4419]

@@KingdomGloryLeather Brilliant thank you

[@pemj7360]

Great video and nice wrist band . But you could have slowed the pleating down a bit

[@aki-no-watari]

最高です！

[@KingdomGloryLeather]

Thank you.

[@xaviero1412]

How did u prevent the snap button become rusty because of sweat and water ? Nice tutorial by the way.....👍👍👍

[@KingdomGloryLeather]

Buy quality hardware to help prevent rust. Thanks for watching!

[@xaviero1412]

A stainless button maybe? When the button become rust, the leather itself easily broke around that rusty button.

[@Norsesailing]

What is d price

[@KingdomGloryLeather]

Sorry I am currently not selling.

[@ВераМосягина-ы2в]

💕💕💕💕💕👏👏👏👍👍👍👍

[@АлександрБогомолов-я3м]

🤟👍

[@kfr93]

🇹🇷👍💯👍💯👍💯👍🇹🇷

[@lazymom4292]

Ещё б было подписано, чем кожа всё время обрататывалась.

[@christianstone799]

Your steps are wrong. Mine keeps coming undone and I am following your steps exactly.

[@dontwerry]

He literally braids the bracelet in front of a camera from start to finish. His should also become undone if what you say were true.