Kitchen Plumbing : Double Handle Kitchen Faucet Repair

[@Angie-my4gz]

I learn something new every day! My dad was a plumber but passed away before he could teach me all these things. Thank goodness for gentlemen like yourself! Fixed my faucet and saved some much needed cash!

[@HylanderSB]

Thanks Roger! It’s probably been thirty years since I repaired a sink faucet. I just needed to see how the damn thing comes apart. Mine was a little different but not so much that it made it difficult. Your tutorial was perfect.

[@BigLivigVideos]

Thanks buddy! Fixed my faucet in 15 mins, first video in the list when searching "Fix my two lever leaky faucet", plumbers and faucet manufactures beware, with videos like this more people are going to be doing it themselves and not just buying new ones! :)

[@bobgarrett7477]

Had an 18 year old model faucet at my beach house. Helped tremendously on repair. Thank you very much.

[@chrisstuart6465]

I looked at a lot of videos - yours was by far the BEST!! Thank you!

[@BobJones-zf6ie]

Roger, you saved my bacon! I have the exact same faucet set and got down to the part for removing the valve insets but mine just wouldn't budge. So I was concerned about pulling too hard...maybe some threads involved but your demo confirmed the valve insets were just jammed and I screwed the top phillips screw back in the top of the inset and pulled on that. Finally after a lot of huffing and puffing the valve insets came out. Much appreciate your video.

[@elizabethpierluisse1905]

great video, had my faucet leaking for 2 months and fixed it in 15 minutes.Dont know why didnt think about it sooner!!!

[@FamilytripsNevents]

I got two free cartridges from Moen under their Lifetime Guarantee but the instructions didn't cover my faucet design while your video did perfectly. Thank-you for sharing!

[@kevinsmith6oh6]

Thank you boss! My stem was built into my handle and all I did was follow your instructions and removed the stem and installed the stem and tightened it up manually then added the handle cover back on last! Like brand new! Thanks for the video! Much help!

[@RibbitHopX]

Thanks! My handles were loose and wobbly, so your awesome video helped me figure out how to get to the screw to tighten it. Fixed. Yay!!!

[@praisegod3768]

Wow, yea - perfect! This is my exact Moen sink, and this morning, I noticed the hot and cold water handles on my kitchen sink (which has only been in my kitchen a couple of years) seem loose and wiggly. I think, thanks to your video, that I can repair this myself!

[@ssksickssk]

Oh my goodness, excellent video. Crud build-up in the gooseneck faucet we have in our kitchen was the problem. Thank you so much.

[@birdman0083]

Roger, Thank you so much for posting this video. It was so helpful. It just so happens that I have this exact Moen faucet and it was leaking like crazy. I saw your video and figured it needed new cartridges model 2412 and did the job myself. Thanks so much again !!!

[@patlane4930]

Great simple explanation! Good job

[@wm437]

Thank you for sharing. This video has helped me a lot.

[@jenb5144]

Thank you so much for this! I was able to replace the faucet stem without any problems. You rock.

[@crubeor1]

Very nice video, saved me a weekend plumbing repair bill!

[@Autofusionchannel]

Didn’t take long to fix at all Thanks a bunch 👍👍

[@sjnichani]

good video roger

[@heyitismyusername]

I have that same faucet. I was ready to replace the cartridges, but upon taking it apart, realized the whole handle had corroded... so have to replace the whole faucet. I was lifting up the whole sink trying to lift off the handle after taking out the screw.

[@daisysweird1361]

What do I do if the part directly under the handle won't come off? 4:00

[@laurab.939]

Great video! Thank you!

[@bernadettepesce773]

Just what I needed!

[@deeann424]

Did you replace just the black rings or the whole cartridge?

[@joshuashuck6976]

Hey roger I kinda feel like you are the bob ross of plumbing 🤣

[@dreamsmyth]

I totally thought the same thing!

[@robira1313]

Why did the leak stop when you didn't replace the gaskets?

[@darincampbell7247]

I get it and I will try this on my sink! Wish me the best!

[@Tomel3a]

Thanks for the tips. Well done.

[@joekind1]

Can the O-rings in the center goose neck be replaced or does the goose neck need to be replaced with the new O-rings already in place?

[@DanDDirges]

When you pulled that thingy out it looked just like mine. When you say if it don't fix leak then replace the faucet. Do you mean the whole sink faucet or just the thing you pulled out with the O rings on it?

[@ramonalvarado5691]

What if the screw head is stuck with sediment?

[@ATebbs1]

I know this says 9 years ago…but I have an older kitchen sink that has these handles with the philips screws. I cannot get the screws out to remove the handle, so they must be rusted in there. How do I get them out?

[@tlt61]

Why did you put the same old O-rings back on the valve?

[@kitty_1960]

I need to know how to fix the faucet part in the center where the water comes out. Mine is leaking both above at the base and below the sink. Any ideas?

[@christopherjoseph4947]

I have notice that most of the repairs I have seen are on the lock off side of the faucet what about the part that swings from sink to sink I have a faucet that is leaking between the spaces,can you help. Thank you.

[@rightbro]

What do i do if i removed caps on top of handles but dont see a screw?

[@Lacronh]

I have a squeaky faucet, but cannot get it apart. Need some advice. I got the handle off, but when I try turning the metal nut above the escutcheon, the whole escutcheon turns, along with the hoses attached beneath the sink. Could not remove the escutcheon, so I aborted the project. Any advice?

[@mrreybaybay]

How do I fix the middle of the faucet if its leaking at the base of the spout same exact faucet?

[@horalesupervato1]

That’s what I’ve been trying to find as well

[@guezcisco]

Can you tell me which moen model# please I have the same one and need parts.

[@mzbeegrier539]

Can somebody help me? My old faucet is shaped the same way; 2 handles, but there are no screws on the handle.....how do i get it off then? Or can you recommend another video to watch?

[@anitaclary3457]

Thank you! I'll pick up some little gaskets and fix that drip.

[@maymarsha9353]

How can I unscrew the rusted? I think I have a old two handle sink and the screws are rusted so how can I unscrew them?

[@rbshort151]

White vinegar frees it up

[@RockAnAhardSpot]

Awesome, is that microwave still working? the 1981 sanyo? Your stove is freaking cool.

[@BOHICA_]

I like the way the tile stops halfway of the electrical outlet. Bad measuring or poor planning?

[@amybrown5135]

He didn't fix or replace anything?

[@Ethelemund]

O-rings

[@sharonsunshine2532]

It would have been nice if the camera person would have zoomed when you were explaining certain things. I needed all the visual help I could get. 😂 😁👍 Thanks anyway 💛

[@noel888]

Usually American Standard or Moen would send you a complete pair of cartridges to replace a leak, with nothing saying about rings. This guy just took off the rings and put them back on again as far as I could tell.

[@joycecharlton455]

I'm trying to change kitchen faucet from two handles to one

[@mjt9560]

This faucet is the moen banbury, model 87399. Here is the link: www.moen.com/support/Banbury/Banbury_Chrome_twohandle_high_arc_kitchen_faucet/87399

[@jdusa12]

Roger is there anyway you could tell me what model and series number this faucet is. I have the same one and need to buy replacement parts . Thank you!

[@xenazon9731]

I think I found it on Moen's site. If I'm right, it's Model: CA87876... (discontinued). It's a Lexie Chrome Two-Handle High Arc Kitchen Faucet. Check the photo at: www.moen.com/support/Lexie/Lexie_Chrome_twohandle_high_arc_kitchen_faucet/CA87876 to make sure it's the right model. (Hope that helps.)

[@usaearthling]

Thank you, Roger, my husband is gonna have to take me out for steak tonight.

[@fionafresh8435]

Thanks.

[@micuzzu]

Can't stop staring at the terribly recessed outlet plates

[@willybee3056]

Hear is something that you may need to know.. THE CAPS ON THE TOP OF THE HANDLES MAY NEED TO BE SCREWED OFF,,, mine did... now I have even less hair...😲

[@paulnormandin5267]

If he is a Home Repair guy then I really hope this isn't his house. Apart from the grunge around the faucet, look at both electrical outlets. Really smart to have them out like that, especially around water... what could go wrong? Also, look at the big coil on the stove in front. The metal bowl/ring is missing. That is what stops chucks of shit from ending up under the heating elements and on top of the oven.

[@rdyapo]

Nice.

[@noel888]

I don't get it...what did he repair? He removed the 2 "O" rings and replaced them again and that fixed the leak? i thought he would have at least replaced those old rings with new ones.

[@benshomshor4822]

+Anthony You are correct, but I trust that if was doing a repair, rather than a quick "how to" demo, he would have replaced them with new "O" rings. Also, might as well do the other one at the same time.

[@larryjoseph9864]

You dont need to buy a whole new faucet if the stem repair didn't work ,, you can just replace the water stem with a new water stem

[@micuzzu]

Two--handle sink also known as a faucet

[@geoffbowers7226]

I have a faucet that has no visible way to take the handles off. There are no scews no nuts

[@alyssakelley7418]

Okay, I'm putting on pants an wll try and fix my leak, haha thanks

[@pn3940]

Would be nice to describe the problem first before repairing.

[@cletusspucklerstablejeaniu1059]

Apparently, cleaning the calcium build up and the black crud is out of the question.

[@JeannetteKohlhaas]

Looks simple, I'm following the directions, but water still doesn't come out,.,.,

[@mohdalhmoud3548]

Roger, why did you stopped filming when you took the cartrage off and when you put it back, the most important thing, the rest anyone can do it!!!

[@RICHARDITIO]

Don't use pliers on bright or finished parts!

[@swinn1967]

Your diverter valve is bad. It needs to be replaced.

[@davidborch213]

good video, but some one needs to learn how to install electrical boxes

[@541dose7]

Helpful....

[@f.demascio1857]

Its's not a sink. It's a faucet.

[@pavelsamusenko4868]

F De Mascio

[@TheLegendarySuperSaiyanBroly]

😎👍🏻

[@giobikefans]

No more wet bacon!

[@JoeNathan42420]

Let me get this straight.. all you did was pull it out take the seals off, look at it an put it back together? This should be ez

[@clifflee3620]

Must be a slum lord rental. Terrible tile work, outlet covers not tight to the wall. Lick it Stick it work !

[@preracer8144]

U must live in Beverly Hills?