UiPath REFramework - The Basics for Beginners (Full Use Case)

[@snigdhasnigdha4483]

I was struggling from last 2 months for learning RE- Framework...I am blessed that I came across your video...thank you for the amazing content sir😊

[@andersjensenorg]

Thanks a lot, Snigdha Snigdha 🤗 Your feedback helps me immensely. You're more than welcome at my Discord, where we're 6000+ RPA developers networking and solving problems: kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@dwaithalovehetwik6259]

Hii snigdha ...if u dont mind can u help on this please .I got little problem Iam not getting for each row in data table in REFdispatcher . It showing me in for each row in data table in workflow not in data table can please help .Thankyou in advance

[@aniketpanari2813]

@@dwaithalovehetwik6259sure I can help you

[@ioanarenard6252]

Congrats for 2022 MVP, Anders! ❤

[@andersjensenorg]

Thanks for all your support, my friend 🙂

[@pradeep5078]

Thanks for clearly explaining the RE Framework concepts. Congrats for 2022 MVP.

[@andersjensenorg]

Thanks for the nice words, Pradeep 😊

[@anilyadavKNL]

Best Video For Re-Frame Work.

[@andersjensenorg]

Thank you very much, Anil 🙌🥳

[@studentofknowladge]

clean and easy to understand. Thanks a lot sir !

[@andersjensenorg]

Much appreciated, student of knowledge. Kind regards, Anders

[@vendettasnares]

Thank you, nice to get my knowledge refreshed before teaching about REFramework 😅

[@andersjensenorg]

My pleasure, you will do great 🙌💯 Kind regards, Anders

[@sundar2955]

Great fan of your Videos., Teaching is an art and you are a Piccaso of it Sir !

[@andersjensenorg]

Thanks a million, appreciated 🙂 Kind regards, Anders

[@yakupkoskalan5321]

It's a really useful video for beginners, I was having a hard time learning until I came across your videos, you explain very simply , I really liked it. I would like to take the course you gave on udemy on this subject. I don't know if my opinion matters, but you did a really good job.

[@andersjensenorg]

Hey Yakup - you opinion matters A LOT - thanks a ton, highly appreciated 🙌😊

[@Vijaykumar-ct6ss]

Wow.... Thanq so much. You explained very well from basics. You have much patience. I will definitely recommend to my friends 💐

[@andersjensenorg]

Hey Vijay. Thanks a lot - your comment really helps me (+ makes me happy) 😀 Kind regards, Anders

[@Venkateshudd]

Same felt

[@Fedgery007]

Such a helpful video! Thank you!

[@andersjensenorg]

Thank you for watching and leaving such a kind comment!

[@AmitPandey-qd8du]

You made an interesting video. Now i am able to understand the RE framework.

[@andersjensenorg]

I'm so glad to hear, thanks a lot 😍

[@AmitPandey-qd8du]

Thank you so much sir.

[@joswadsouza1445]

Thanks for clearly explain and congrats for 2022 MVP 🎉

[@andersjensenorg]

Joswa! You're very welcome and thanks for the nice words 🤗

[@Earnmoney4life]

adding to what i experience is in the REframwork data folder, the config file is missing. This is due to the default filtering of the project folder. Do ensure you click on others, the the config file in xlsx will appear

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@naziraltamar]

Another great tutorial!

[@andersjensenorg]

Thanks a lot, robert dabrowski 🤗 Your feedback helps me immensely. Kind regards, Anders

[@andersjensenorg]

My favorite UiPath Books (KZbin video): kzbin.info/www/bejne/q2nJiKGhi5ihaJY 📚

[@thonysxcvlogs4570]

Hi, I am trying to follow the steps however I encountered an error "Write Line: The given key was not present in the dictionary." in the Write line of "in_TransactionItem. In 55:40

[@andersjensenorg]

Hey Thonys. You try to call a key, that doesn't exist. Please check where you add it (and if you really do it). Kind regards, Anders

[@obadamihaithsrytked9972]

Hello Anders. Can you tell me which extension do you use for pass managing at 23:39 . Thanks

[@andersjensenorg]

Hey Obada. Its Roboform and I recommend it 🙂

[@Eray-qx8tv]

Thank you for your great content :)))

[@andersjensenorg]

Thanks a bunch, @Eray-qx8tv 🤩 I've created a Discord. We're more than 9000+ RPA developers networking and solving problems here: kzbin.info/www/bejne/roipq2CJbpuLfdE You're more than welcome. Kind regards, Anders

[@NicolasDahm]

Hey Anders 1:06 Why do you use a lookup database and just don't use a for each block to go through the database and write the items? Thanks!

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@silvanaescamilla]

Hello Anders. I am truly green when it comes to UiPath, but in a couple of days, you have helped me understand concepts. Do you teach a course in Udemy for beginners? I would like to train in a structured video format. Many thanks.

[@andersjensenorg]

Wow, many thanks, highly appreciated. Kind regards, Anders.

[@sushilbhaskar5500]

Thank you so much for this video 😇 It was great help 💯

[@andersjensenorg]

You're very welcome, Sushil. Thanks a lot for commenting 🙂

[@abdkhayyat5863]

appreciate it, Thank you

[@andersjensenorg]

My pleasure, Abd 🙂

[@lavanyachowdary6395]

Hii Anders . I got little problem Iam not getting for each row in data table in REFdispatcher . It showing me in for each row in data table in workflow not in data table can please help .Thankyou in advance

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 7000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@lavanyachowdary6395]

@@andersjensenorg Thankyou so much Anders will do that

[@andonii46]

Hi Anders! Great video =). One question from here, isn't it a bit unpractical having dispatcher and performer in 2 sepparate packages? I mean, you would need to have 2 git repositories, use 2 config files, convert reusable workflows to libraries in order to avoid mismatches, etc. Am I wrong? Thanks!

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 10,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@andonii46]

@@andersjensenorg no problem Anders, you do a great job! Just pointing it out :) (I am already in that discord channel a while ago, great initiative)

[@mateuszguzek8267]

Hi Anders! Love the videos. Could you make a video about the REFramework using email item queues? without using the orchestrator? (to what do we need to change transactionItems and TransactionData) and what activities to use in the GetTransactionData? many thanks Matt.

[@andersjensenorg]

Hey Mateusz Guzek Thanks for writing. I'm getting more than 50 questions/comments every day and having difficulty answering everyone (I try my best). I've created my UiPath Groups, where we all can post and solve problems or hang out around our favorite tool, UiPath. So you're very welcome. Get the addresses here: kzbin.info/www/bejne/eWfbnnqcerFjbas Have a great day. Kind regards, Anders

[@terrymarr5265]

A bit confused about the data table dtCountries. If it has main scope, why must it be passed as an argument?

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 11,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@nicholaspitti8171]

49:16 full diagram explanation here

[@andersjensenorg]

🙌🙌🙌

[@CNTKR22]

System exception at initialisation: The sheet does not exist at source: UI Path Excel. Please help me out with the error

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 9000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@tikon26]

I get the following error -"Lookup Data Table: Data Table" and it highlights the Lookup data table in the Invoice Process Workflow. IN that lookup table, "Column" & "Column Number" fields are empty. I cross checked, even in this tutprial you have left them empty. Could you please help in debugging this?

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 11,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@amirfcb]

is tha possible to write Dispatcher in REFramework?

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 7000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@IvorLongarrow]

I don't know if it's me who missed it, but I lost a lot of time because I did not understand that everytime I want to to launch the ReFramework, if I want to find transactions, I have to relaunch the dispatcher. Otherwise the system says there are no more transaction to be processed because we have used theme to Test with the Write Line to Output. Anyway thanks for the video. But if you can clarify on this it would be helpful.

[@andersjensenorg]

Hey Francesco Carlea Thanks for writing. I'm getting more than 50 questions/comments every day and having difficulty answering everyone (I try my best). I've created my UiPath Groups, where we all can post and solve problems or hang out around our favorite tool, UiPath. So you're very welcome. Get the addresses here: kzbin.info/www/bejne/eWfbnnqcerFjbas Have a great day. Kind regards, Anders

[@joseantoniogonzalezalcanta1748]

Hi Anders! I like your videos. i got a little problem that u may be able to help me with The REF procees stop in Throw: The countries... Thanks in advance

[@andersjensenorg]

Thanks a lot 😊 Did you surround it with a Try Catch?

[@joseantoniogonzalezalcanta1748]

@@andersjensenorg I have it exactly like in the video

[@andersjensenorg]

@@joseantoniogonzalezalcanta1748 Weird 😫 Can you please try to post it on my Discord? The link is in the description 😊

[@joseantoniogonzalezalcanta1748]

@@andersjensenorg Thank you very much for your attention, I know what my mistake is, I was debugging the file, not running it.

[@mrnock2]

@@joseantoniogonzalezalcanta1748 Gracias Jose Antonio por poner la solución en este hilo, en lugar de tener que ir a otra parte a buscar la respuesta, como en los libros esos de 'si quieres la solución, vete a la página xxx' 🙂. Me ha ocurrido lo mismo y realmente, no sabía cómo solucionarlo ya que le doy por defecto al 'Debug File'. Una cosa más que he aprendido... Un saludo y happy automation! // Thanks Jose Antonio for posting the solution onto this thread, instead of having to go to another place to find the solution, such as those books like 'if you want to get the solution, go to page xxx' 🙂. I have faced the same problem and honestly, I had no idea about how to fix it because I used to click 'Debug File' button by default. Another new thing that I have learned. Greetings and happy automation!

[@andresalvarez4482]

To create a Dispatcher using the reframword we dont need to use select the reframework as you did at the beggining iog the performer part?

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 8000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@roger9677]

Hi Anders, I got an error “Write Range: Object reference not set to an instance of an object. I can’t find dtCountries in listed arguments. I guess this might be the root cause. But I don’t know how to fix it.

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 9000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@alvarorivas9429]

Hi Anders, i got a little problem that u may be able to help me with. So when i use a Get Asset activity to get the path for the read range i get an error "Illegal characters in path" that i dont get if i just type the exact same path into the variable directly. I made sure with a write line that the Get Asset activity is taking the path correctly and it is so I dont understand why im getting such error. Thanks in advance

[@alvarorivas9429]

So in case anyone is as dumb as myself the problem was that i was introducing in orchestrator the path with the inverted commas included and that was exactly the problem, also i found out that since in the asset whatever u put in is a string if u need to add a variable inside u can put {0} to later replace it inside uipath. Example: x = whatever variable u wanna use Asset = Documents\{0}_Result str_FinalResult = String.Format(AssetName, x) This would give us at the end that str_FinalResult = Documents\x_Result Also if u want to add more than one you can use more numbers like {1} and just add whatever u want to replace it with after another comma.

[@andersjensenorg]

Hey Alvaro. I love that you come back and post the solution. Thanks a lot 😊

[@alvarorivas9429]

@@andersjensenorg Thank you for your tutorials, they are helping me a lot!

[@loveisforfree]

You are the best

[@andersjensenorg]

Thanks a lot, Mariana 🤗

[@sandeepbhaskar3762]

Hello Anders, while running this workflow, I'm getting an error as "System exception.Could not determine the browser tab on which to navigate. at Source: Go To URL", Could you please help me to troubleshoot it?? Thanks and Regards.

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 5800+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@uipathautomation7904]

Hello Can you provide a demo class regarding Re Framework

[@andersjensenorg]

It's what I do in the video? 😊

[@kirankiran-bf3ow]

hi ......Anders could u make it a video on 5 to 6 excel files into merging in all one excel file

[@andersjensenorg]

Hey kiran kiran Thanks for writing. I'm getting more than 50 questions/comments every day and having difficulty answering everyone (I try my best). I've created my UiPath Groups, where we all can post and solve problems or hang out around our favorite tool, UiPath. So you're very welcome. Get the addresses here: kzbin.info/www/bejne/eWfbnnqcerFjbas Have a great day. Kind regards, Anders

[@noturcandies]

how do I enter data into multiple rows? the video tutor only entered data into 1 row. thnks🙏

[@andersjensenorg]

Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 10,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): kzbin.info/www/bejne/roipq2CJbpuLfdE Kind regards, Anders

[@ronaldello97]

My Get Asset does not look the same as yours. Why?

[@andersjensenorg]

Hey FeelNoWays Thanks for writing. I'm getting more than 50 questions/comments every day and having difficulty answering everyone (I try my best). I've created my UiPath Groups, where we all can post and solve problems or hang out around our favorite tool, UiPath. So you're very welcome. Get the addresses here: kzbin.info/www/bejne/eWfbnnqcerFjbas Have a great day. Kind regards, Anders

[@jaysizmir9432]

How about having multiple files in input :D

[@andersjensenorg]

Hey jays. Do you mean the Excel? Kind regards, Anders

[@jaysizmir9432]

@@andersjensenorg Yes, like multiple excel files in inpit, when every line of each excel file is a transaction :D

[@HM-ir3rp]

54:04

[@yurdanuryusuf961]

Can you add Turkish subtitles?

[@andersjensenorg]

Unfortunately not 😔😔

[@1332por2]

🥰🥰🥰🥰🥰🥰

[@andersjensenorg]

😍😍

[@r.ismail7025]

I love your videos you help us very much thank u very much 🤍🤍🤍🤍🤍🤍

[@andersjensenorg]

Thank you so much for letting me know 😍😍😍