How to Replace Blower Motor Resistor Skoda Roomster Skoda Fabia

How to Replace Blower Motor Resistor Skoda 6Q0959263A
How to replace passenger airbag Skoda
In the film there is a slight mistake, there is a Torx27 but there is supposed to be Torx30.
The thermal fuse is often the cause of the problem. The problem can be caused by a break in the circuit of the resistor. kzbin.info/www/bejne/goaxp62vq9NrgJo
amzn.to/3wULmRi
If you want to thest the blower first, you may chack my other video how to do it: kzbin.info/www/bejne/goaxp62vq9NrgJo
*************************************
- If you enjoy my content and like to support me then I’d be so grateful for a virtual „coffee“. Any amount is welcome and goes a long way to keep me going. Thank you. www.buymeacoffee.com/knemo
- I'd love to hear your thoughts. Please comment, like and let me know what you'd like to see next.
Subscribe for the latest videos:
kzbin.info
Music:
I Am Running with Temporary Success from a Monstrous Vacuum by Chris Zabriskie is licensed under a Creative Commons Attribution licence (creativecommons.org/licenses/by/4.0/)
Source: chriszabriskie.com/honor/
Artist: chriszabriskie.com/
#knemo #blowerMotor #blowerMotorResistor #resistorSkoda #skodaResistor

[@eddiboye]

Worked like a charm on my Roomster 2007. Bought the blower resistor off ebay for 17 dollars. The work itself took med all and all 40 minutes. Had a bit difficulites clicking on the new resistor. Couldnt twist it back fully but nevertheless, it was secured in it´s place. Now alla speeds on the fan are working. Prior to this operation I hade zero effect on level 1 and 2. Thank you so much for this video! Your effort saves a lot of money and time for us all! I take my hat off for you Sir!

[@k-nemo]

Thanks a lot for your comment

[@MrNarcisducan]

What is the name of the piece, you replace it?

[@adamcooper8342]

Brilliant video, the workshop manual says to remove the whole dashboard to gain access, so seeing this has made it 1000x easier. Thanks for putting in the effort.

[@k-nemo]

Thanks for a lovely comment

[@robinsimmons2000]

I'm very grateful to you for this. It was a fairly simple job and took only 30 minutes. The hardest bit was getting the new component to seat and lock in place. There is very little to lever against when using a screwdriver to remove the airbag, but the end of the lug on the far right can be lifted against the steel bracket below it.

[@andybraithwaite2052]

Great and very helpful video that saved having to take the car to a garage for a simple fault. Got a replacement resistor off eBay and got the job done in half an hour. Read other comments and followed tips like blu-tac on the torx driver. Once I removed the airbag T30 screws, it was loose and I could see that it just needed to be levered up with a large screw driver to pop it out of the dash top. This was helped with some plastic trim levers I already had. Managed to do it without disconnecting the air bag too. The hardest part has re-installing the airbag top cover but once I realised how it clipped back in it was no problem. Thanks for posting.

[@k-nemo]

Thanks for leaving a lovely comment. It's great to hear the film was useful

[@MarcineXLC]

Mistrzostwo, najlepszy tutorial jaki znalazłem w internecie. Dmuchawa smiga jak nowa. Dzieki wielkie 💪

[@ScarboroughGalaxy]

Thanks, worked a treat on my 2011 Fabia. I did buy the whole fan resister unit for about £10 from Amazon. It then just took about 45 minutes to fit 😎

[@MightyReek]

Awesome instructions. I have the resistance burned for two years and I thought I'd have to remove the full panel of the car, after all it took me 5 minutes to have it out... If at least I'd know before also burning the vent switch... Thanks mate!

[@marksweeney2045]

Great instructions - worked a treat. I bought some car plastic panel removal tools (approx £6) worth it so no damage to lifting air bag panel. The air bag panel removal is the hardest part! - Thank you

[@k-nemo]

Thanks for the comment, Mark. Great it worked for you

[@gregoraquillusx6889]

Dziękuję za doskonay instruktaż, właśnie skończyłem wymianę całego modulu, krok po kroku jak na filmie. Koszt to 9£ a satysfakcja ze zrobienia bezcenna. Dziękuję i pozdrawiam.

[@k-nemo]

Cieszę się że film był pomocny.

[@Quarms95]

Very good video! Saved me a fortune! Bought the part of amazon with prime for £7.06. Skoda wanted £148!!!! Took me 10 minutes to fit! Life saver!

[@k-nemo]

Thanks a lot

[@jjfoster3477]

Excellent video - just saved me £100 and 2 days off the road. Only took 30 minutes to do and no problems when connecting battery agai9n. Just need to be very careful about NOT dropping airbag securing screws when removing them. Magnetic bit holder and cardboard used to cover holes just below the screws highly recommended.

[@k-nemo]

Thanks a lot for leaving a comment and and a tip. It's very easy to loose a screw. I'm glad it worked for you.

[@fairmania]

Just did my 2013 Fabia with a replacement part from Ebay at £9, bit of a sod getting the airbag plug off and then back on, but all done in about half an hour, or so it seemed! Those Torx 30's are tight!! All done, fan working again, thanks very much for the vid, excellent help!!

[@k-nemo]

Well done! Thanks for a comment

[@clewingriffith7387]

Fantastic video. Worked like a charm. I didn't even have to unplug the airbag unit.

[@lt8401]

Hey man just wanted to say thanks, just fixed my wife's Fabia , my EX mechanic wanted to charge me $1500aud to do the job. Your video made it very easy to do, it took me no more than 15 min. Cheers

[@k-nemo]

It's great to hear the video was useful

[@allanhope2587]

Thanks saved me money and this video helped me loads, job done in 34 mins, didn’t unplug the airbag, sat it to rightside on cloth. Omg airbag refit took a wee bit persuasion thanks.

[@georgesaunders4825]

Great instructions, thank you. I didn't unplug the airbag as it looked a bit fiddly. The wires were just long enough I could lift it out and put to the side to reach the resistor.

[@k-nemo]

Than you for the comment. I'm happy that you managed to replace it.

[@DavidSmith-ie3nd]

Very helpful indeed, thank you. The airbag was the hardest part as others have said. These Fabias are robust cars overall.

[@k-nemo]

Couldn't agree more!

[@robinpugh6067]

Your brilliant video has just saved me around £150. Quoted £53 for the part and £108 to fit by local Skoda garage. Bought replacement from Amazon for £10 and took me around an hour to fit. Bit fiddly but quite doable. I put a small blob of Blutac on the end of my torx bit to hold the screws when I removed them - many thanks.

[@k-nemo]

Robin Pugh Thanks fot the lovely comment. It's great that it works for you.

[@richardwillis1719]

Very helpful. The screwdriver wedging out the cover and bag is key to making the job easy. The other moves are clearly shown. Many thanks.

[@k-nemo]

Thanks a lot for watching and leaving a nice comment

[@JeffCrossley]

Big big thank you, after watching your video a job I thought that was going to be a nightmare turning into a 5 minute job.

[@k-nemo]

Great news, thanks a lot

[@ingridbain4168]

Thank you for that, though you made it look easier than I found it to be. Mission accomplished.

[@k-nemo]

It's great it worked for you

[@skybluejmc]

thank you! that fixed my Skoda Fabia. also saved us over £190

[@k-nemo]

good to hear it

[@paulgalloway2958]

Brilliant. Just saved myself over £180 (quote from Arnold Clark). Got part from China at cost of £4 or so. Much thanks to you. Getting the airbag out is a pain though. Really have to prise it out with quite some force. Thought that it would never come out.

[@k-nemo]

I am glad it was useful for somebody.

[@joshramos9531]

Great vid ty. Hardest part was prying off the airbag compartment. In the end i decided brute force with a flat head was the only option.

[@k-nemo]

Congratulations!

[@melnicholls6682]

Brilliant! Straightforward, clear instructions. Job done on my son's Skoda Fabia.

[@k-nemo]

My pleasure!

[@lordsimonton]

thank you for this video! it was clear and superhelpful! much appreciated

[@andybarker3943]

Just done this, great instructions, cost me £7.39 for a new resistor unit, not soldering required, just clipped it in! Relatively easy to do, if I ever need to do it again it’ll be easy.

[@k-nemo]

Thank you for the constructive comment Andy. You're right, it's easier and faster to replace the entire unit.

[@randiya]

What type of resistor is it?

[@harouniabdelhamid3189]

this is the right question

[@mils2602]

Thank you for this video. Managed to save a lot of money.

[@k-nemo]

Thanks for a nice comment

[@Colt8631]

Just did it on my Roomster. Thanks a lot!

[@calg2041]

This helped a lot for my MKII Fabia too! Thanks!

[@k-nemo]

Great to hear!

[@frankcunliffe1801]

SPOT ON, just done it on my FABIA II 2010 1.6 tDi all working ok , thank you for the video.

[@k-nemo]

Glad it helped

[@globalste]

Great video, everything perfect except mine is T30 bolts holding the airbag in. Struggled getting the cable off the original resistor pack but got the pack out easily, really struggled getting the new pack in, couldn’t turn it all the way, assume it’s ok as it felt secure!!

[@k-nemo]

Thank you. My low quality torx bit size 30 was a bit too big.

[@pomajzsolt4363]

You just saved lot's of money and time for me haha Thank you!

[@k-nemo]

You're welcome!!

[@TheM3taxa]

Thank you for the video! I was able to fix it thnaks to you! More $ in my pocket!

[@lunguflorin5980]

Mulțumesc mult pentru ajutorul acordat

[@Shredneckguitar]

Thankyou for uploading. Doing this repair myself.

[@k-nemo]

Good luck! Disconnect the battery.

[@discompobulated]

Brilliant video. Saved me a fortune. Thank you

[@k-nemo]

Thank you

[@UniversalControl]

Thank You! Very helpful.

[@k-nemo]

You're welcome

[@Michaelcolliermedia]

Brilliant thanks. Hardest part was getting the airbag out 😁

[@bilrengoring4968]

Hey there, thank you for the video! I own a Seat Ibiza 4. 2008 with only 4th speed working on the fan. I bought a new resistor but the issue is not solved. Still only 4th speed working. Any suggestions? Тhanks in advance!

[@julien1]

Hi mate do i access bulkhead grommit (engine bay access) on roomster the same way - i want to fit a switch to my dashboard and straight to battery. I dont know the bulkhead grommit is.

[@ukasz1911]

Bardzo prosta operacja. Trzeba odkręcić 5 śrubek, wyjąć i odłączyć moduł. Podłączyć nowy. Koszt ok 50 PLN. Dokładnie tak jak pokazał autor. Skoda Roomster 1.2 TSI 2010. Dzięki.

[@k-nemo]

Proste, niestety demontaż poduszki powietrznej odstrasza większość zainteresowanych osób.Torx30, nie Torx27 (nie każdy przeczyta opis). Bardzo dziękuję za komentarz.

[@arturkubiak9805]

K-nemo próbowałeś wyjść dmuchawa w Roomster? Mam taki problem że niby działa... raz normalnie .. raz podnosi obroty wszystko niby działa ale trochę zyje wlasnym życiem😉... diagnostyka pokazuje sporadyczny błąd dmuchawy

[@TALEX-07]

When you change the small resistor Put the whole thing in the water to reduce the temperature, in this way it's risky because you can overheat the small resistor and than you need a new one ! :D

[@k-nemo]

goog idea

[@smad333]

+1 Perfect tutorial for a 2012 Skoda Fabia - thankyou!

[@k-nemo]

You're welcome!

[@derkomtube]

Brilliant! Thank you so much!

[@k-nemo]

You're welcome

[@mycomment6699]

it is like a surgery, very nice, new subscriber and thumbs up. by the way is it same procedure for octavia mk1? thank you

[@shaunlachut5879]

Anyone know where the relay switches are on a Skoda Fabia.Also fuel gadge not working replaced fuel pump in petrol tank still fuel

[@tmautosstaustellcornwall5882]

Thankyou you really helped me here in the uk 😀

[@k-nemo]

No problem 👍

[@alextheone8892]

Hi is this going to work on a Skoda Fabia from 2008 ? it has the climatronic system

[@shaunlachut5879]

Replaced fuel pump in petrol tank as fuel gadge was not working but it's still not working can any one help .also can't find where relay switches are

[@jasonpike9683]

Good video, my fan does not work on any speed. Could this resistor pack still be the problem or is it likely something else like the motor and if so do you have a video of replacing the motor.

[@Basetornado]

Try the fuse. The fan should still work on setting 4 without the resistor. If not it would be motor.

[@andrejz.1156]

What is the walue of fuse , I now around 200 C and what about Amps ?

[@cosminmorga1331]

Great video !

[@neil2wheels876]

Great vid. Although the arrow at 1:41 should be up as the airbag pops up and out, not sideways and up. The leverage needs the be upwards.

[@k-nemo]

Thank you for appreciating my video. I am pushing the screwdriver in and then turning it.

[@mdavidy]

Hi, In my 2009 roomster the blower works fine but there is no heat comming out. I checked the hot water pipes and their both hot. There is no noise when I twist the temperature button so it is probably the blender door actuator. Do you have a video shows how to replace it?

[@k-nemo]

Sorry I have just came back from holidays. No, I don't have a film about it but I'm sure I've found something by now.

[@coenmarijnissen4401]

Perfect verry helpfully

[@k-nemo]

Thanks a lot for watching

[@iggymitchell5468]

Hy I've done all this on my 2008 1.4tdi skoda fabia and there's no resistor under the air bag any help would be very much appreciated thanks

[@k-nemo]

Sorry, I don't know this make, I'm sure you'll find some information on the Internet

[@florencioruanorodriguez5102]

gracias K-nemo. tengan en cuenta que este video es de un coche en inglaterra, por lo tanto esta la guantera donde en españa tenemos el cuenta kilometros.

[@k-nemo]

Gracias. Eso es interesante

[@xD-ut8cs]

Hello i have problem with air not coming out of middle blower the side ones work good but only the middle one doesn’t work some fix for it?

[@ivaylokosev8230]

Great job 👏

[@kajo227]

Thank you for nice video.What resistor has the ohm values ?

[@k-nemo]

This is thermal fuse.

[@k-nemo]

Maybe my film 'fan blower motor resistor test' will help? kzbin.info/www/bejne/goaxp62vq9NrgJo

[@robcolley405]

Anybody know what year of manufacture the car is that’s being worked on? I’m trying to find replacement part for a 2010 Skoda fabia

[@k-nemo]

It was scoda roomster manufactured in 2011 or 2012

[@skybluejmc]

I'm going to try this tomorrow on my Fabia. fan won't turn on except on highest setting, level 4

[@k-nemo]

I hope it worked

[@skybluejmc]

Yes, it did!

[@zsoltcsaplar8054]

Fantastic job!thanks

[@k-nemo]

Our pleasure!

[@Christophers-Assorted-Stuff]

Am I right in thinking that what you actually replaced was a thermal fuse. The green part is a resistor tapped at several points for speed control?

[@k-nemo]

It is a thermal fuse

[@neil2wheels876]

RG5355 I got the whole until for a tenner off eBay, no soldering involved

[@hugotraum1]

Hi, super Video, ich habe heute bei meinem Skoda Fabia Kombi den Widerstand gewechselt. Bei mir ist der Widerstand nicht rechts wie im Video, sondern links. Vielleicht kannst du das noch vermerken. Super und vielen Dank, heute habe ich viel Geld gespart!!!

[@fanisileyekeni]

Superb my brother, thanks

[@k-nemo]

Thanks and welcome

[@ManpreetSandhu-1300]

Please guide how to pick a matching thermal fuse 10A or 15A. and also please guide how to solder a thermal fuse in which direction or it can be soldered both sides

[@k-nemo]

10A should be enough. Any direction is OK. This is not a semiconductor element. Before changing check yours thermal fuse. Often is faulty but sometimes there is a gap in the circuit in the unit. You can buy new unit in Chinese shop for a few dollars.

[@k-nemo]

Check my film: kzbin.info/www/bejne/goaxp62vq9NrgJo

[@robinsimmons2000]

Thanks!

[@motoren-tommi]

gibt es dafür eine Bezeichnung oder Teilenummer?

[@Your_DIY_Maniac]

What is the volt or value of the resistor?

[@ivanmarinov7507]

Thanks Dude

[@raptorcherokee7019]

Nice and very helpfull video man...Pls...give me the name of soudtrack of this video..I like so much ..Thank you wirh more respect !

[@k-nemo]

Thanks for watching.

[@guliwer9921]

A czy da się też w ten sposób wyciągnąć dmuchawę bo u mnie strasznie wyje wentylator?

[@k-nemo]

Chyba nie. Jest za duża.

[@user-ew3gx5dc5c]

Witam,czy do tej naprawy trzeba odłączyć akumulator?

[@k-nemo]

Tak. Dlatego pokazałem.

[@petrihelmikkala2697]

Awesome!

[@k-nemo]

Thanks a lot

[@deeebus]

Mam Ptanie a dmuchawe idzie wymienic tedy czy trzeba cala deske ściągać??

[@k-nemo]

Nie próbowałem. Myślę że deskę ściągać.

[@moshazza5684]

hi mate. my resistor keeps blowing on my 2012 skoda superb. iv changed it every couple months.. any ideas what causing it to blow.

[@etview]

Some people say a very dirty pollen filter restricts the air flow causing resister pack to overheat

[@moshazza5684]

@@etview my pollen filter has been changed not long ago

[@khanara6]

Will this work on a UK skoda yeti 2.0 tdi 4x4 RHS model? Its a 2010 year model. My symptoms are that the blower/fan doesn't work on any settings not even one through to the highest. Would appreciate it greatly if somebody would post a link to resistor that would be appropriate for this model?

[@k-nemo]

When the resistor is damaged, the blower only works at the highest speed. Check the fuse in the box.

[@khanara6]

@@k-nemo thank you for the response will have a look

[@khanara6]

I have checked all the fuses with a tester for continuity. All are good. Like i said it doesn't blow on any setting. Could it be that the fan is faulty? Or shall i replace the resistor first?

[@growinsane9123]

2 things I did wrong to warn others of, when unscrewing the main screws at 1:15 it is easy to drop them down into the car and lose them... I happened to have a foot long pair of tweezers so was ok but after dropping the first I got some card and bent it gently to make a gutter to lower the risk as the bolt came out, same for putting it back. Other point... as the video says, don't use a screwdriver to lever open the airbag hatch... but equally, when trying to maneuver the air bag to disconnect it, be careful not to rub the air bag fixing across the dash, it has sharp metal pieces on it which scratched my dash worse than the screwdriver showed! Like others I just bought the whole part rather than the resistor... my part looked rusty and had a breach in the coil. Also This is a Skoda Fabia MK2 although the video doesn't make that clear. I am not saying that a mk1 is different... but according to the ebay listing I bought the part as shown in this video from, said it was not compatible with the MK2.... this was not the case however, it looked the same and worked fine.... just saying that because I was anxious when I bought the part but this video convinced me it was probably ok and it was.

[@david6002]

Tried this , great instructions but I still have the blower only on number 4, any ideas please ?

[@k-nemo]

If you only replaced the thermal fuse, the resistor may be damaged. kzbin.info/www/bejne/goaxp62vq9NrgJo

[@david6002]

@@k-nemo where is the resistor please, I only saw that unit and changed it

[@apomm841]

Hello wich temperature for this thermal resistor, is 240° is right

[@k-nemo]

Thanks for watching. The temperature is not given on the resistor. Often there is a problem in picking a resistor with the correct resistance. For a few dollars you can buy a full set.

[@mkpitalia]

Hi I managed to remove the airbag and I can see the resistor unit but can't get it out. I tried wiggling it to the left and right but no luck. Is there a trick to this? I do not want to break it... Also, can you give some info on the type of resistor that you replaced

[@mkpitalia]

And where do you buy just the resistor?

[@k-nemo]

To take the plug out you need to squeeze it like shown with the arrows. The resistor needs to be turned and pulled out. Sorry but I can't remember which way. I got the resistor from somebody. My friend also soldered a resistor but it didn't work. It started working when he brought a ready to use resistor with a holder.

[@mkpitalia]

Thanks for the speedy reply. The trick was to push down while turning it. Anti clockwise worked for me. I have a left hand drive car. I found a complete resistor unit for only as few bucks more than just the resistor on eBay.

[@sherab90]

hello, nice video. Which resistor is needed? thx a lot!

[@k-nemo]

It's cheapest if you buy the whole pack online, for example banggood, aliexpress, ebay. Some resistors for soldering are hard to pick out, the resistance could be different.

[@sherab90]

k-nemo Okay! ty

[@Lorenzoyes]

It is a fuse that burns over 240 degreeso to protect the resistor that controls the speed of the fan motor.

[@TS6DK]

Thanks👍

[@k-nemo]

Thank you for watching

[@burhansied5486]

Thanks 👍

[@k-nemo]

No problem 👍

[@sirbucristian3890]

So, my speed fan 1,2,3 not working, olny 4 th speed, does this solve my problem?

[@k-nemo]

This means a damaged resistor. The thermal fuse may be blown or the resistor circuit may be open. kzbin.info/www/bejne/goaxp62vq9NrgJo Replacing the resistor usually solves the problem.

[@Bloodskeeer]

Moze pomuc jak dmuchawa wogule nie dziala ? Warto spruvowac zanim trzeba bedzie rozkrecac cala deske bh dostac sie do wentylatora ?

[@k-nemo]

Obawiam się że nie pomoże gdy nie działa na żadnym biegu. Przekaźnik, bezpiecznik, silnik dmuchawy?

[@Bloodskeeer]

@@k-nemo to jest z cilimatronic więc nie ma od 1 do 4 pokrętła, na google piszą że opornik może też powodować że nie działa całkiem.. spróbuję itak, tak się zastanawiam jak czesto psuje sie wentylator nawiewu ? Nie powinien się tak poprostu spalić/zepsuć.

[@Bloodskeeer]

@@k-nemo przekaźnik nie wiem gdzie jest, bezpiecznik nie spalony

[@ttsrg]

Thanks

[@k-nemo]

You're welcome

[@motofotose9155]

thank you

[@k-nemo]

You're welcome

[@octavianvisterniceanu4620]

can the motor be replaced the same way?

[@k-nemo]

No.

[@rv5409]

perfect

[@k-nemo]

Thank you

[@magdalenagorgol8239]

sweet thanks

[@k-nemo]

Thank you.

[@angelikanowak269]

Ja , mein lieber das wird wohl der Gebläseregler sein. hatte ich auch. Ist ne aufwändige Arbeit den zu tauschen.Kostenfaktor ca. 50-60 € Ersatzteil. Ersatzteilnummer 5HL351321-281

[@asaifpathan3618]

What is the value of that resister that you have replaced

[@k-nemo]

10A -15A, temperature 150-180 degrees Celsius. Make sure is the thermal fuse is faulty. I made another film how to check resistor: 'fan blower motor resistor test' kzbin.info/www/bejne/goaxp62vq9NrgJo

[@JackTheFox]

Unfortunately didnt work out for me. After removing the bolts i tried to wedge a screwdriver in there, just like you did, but it didnt pry out the airbag. So i went to bigger and even bigger screwdrivers, til i ended up wedging a pry bar in there, bending the whole dashbord as the airbag pushes it up. At some point i gave up because i didnt wanna cause unnecessary damage.

[@k-nemo]

After removing 3 x bolts Torx 30 you have to put the screwdriver under the edge of the metal plate. Look at the picture 1:40 with the red arrow. The arrow is under the edge of plate.

[@JackTheFox]

@@k-nemo This is exactly where i put the screwdriver as well. Just twisting it to the side to pry the airbag up didnt do the trick. I used bigger and bigger screw drivers (Much bigger than yours), til i even switched over to a pry bar and wedged it in there. The whole dashbord pushed up on the sides, but the airbag stayed in place. Maybe its due to the cold temperatures, but it unfortunately didnt work out for me.

[@k-nemo]

I'm sorry it didn't work for you :(

[@ekiekivapang]

@@k-nemo it is the same for me probably because its around 0 deg outside....

[@Ben-is2kr]

do you really need to disconnect the car battery to carry this out? TIA

[@k-nemo]

You don't have to but I felt better when I did it while I was taking the airbag out. When you turn the key with disconnect airbag the computer will register an error which won't disappear on its own so you'll have to go to the mechanic to reset it.

[@fivesmaster]

@@k-nemo hi thanks for your reply. Do I need to turn that key to disconnect the airbag?

[@k-nemo]

No, the key has to be taken out, the power off. In fact you don't have to disconnect the airbag at all but you have to be very careful not to scratch the cockpit plastic with metal part of the airbag. It can be done easily.

[@Ben-is2kr]

@@k-nemo Thanks...just did mine today. It was a real pain as slightly different to yours, I have a Skoda Fabia Estate Greenline. I turned off the airbag using the key turn inside front door. Hardly any space to see where to turn resistor in and out. First time I had not pushed it all way in so fan worked on Number 3, so had to open it all again and push In proper, now working perfectly...thanks!

[@k-nemo]

Super, I'm glad it worked in the end

[@niloyu105]

What is the value of resistor ?

[@arminas666999]

how many degrees fuse?

[@k-nemo]

I had a 172 ºC.

[@charlievarin6559]

I've just done this on my car but now my main airbag light is on. I turned on the car to check it before putting the airbag back in. I've put it all back together and noticed the light. I have turned off and on my passenger airbag but that hasn't changed anything. Has anyone else had this problem/know what I can do?

[@k-nemo]

You should't have turned on the car with the airbag disconnected. The computer has registered the error and now you need to connect the diagnostic computer to clear the error. It is not expensive. You can ask on several garages to compare prices.

[@charlievarin6559]

@@k-nemo thank you I realised my mistake quite quickly