KnifeCenter FAQ

[@colinburgess9455]

Finally a video where I didn’t need to skip through a plethora of folding knives. I have a drawer full of folders in my knife chest all too expensive and non do the job better than a similar sized fixed blade. FIXED BLADES RULE! 😁

[@DL-ij7tf]

I hear you but just so someone says it - a lot of Cold Steel folders would fit the bill really well. I'm thinking the Ultimate Hunter or Code 4 (although any of the triad lock ones really.) For fixed blades the Pendleton Hunter (AUS10), SRK, Master Hunter, etc.

[@czed7515]

​@@DL-ij7tffolders dont work for me. They get so gunked up and nasty and yeah i have to take them apart to clean them but its just so much easier for me to use a fixed blade that i kinda depise folders. I do carry two to edc at work tho lol

[@darylnd]

The incessant flicking has provoked me to propose a metric for folding knife videos, similar to the signal:noise ratio (SNR) in electronics. I call it the signal:flick ratio (SFR).

[@acid6urns]

@@czed7515if you buy a folder on washers with something like a frame lock, compression lock, or a back lock/triad lock they won’t get gunked up.

[@jerrypomroy2375]

Thanks for answering my question. Figured you’d be up for a fixed blade question. I think I’ll be going with the Ontario. I like the idea of it also having a burly chisel tip with a fairly acute radius between the chisel tip & main edge.

[@knifecenter]

It really is the right tool for the job imo, I just hope the new Ontario owners are able to keep it in production -DCA

[@PoetFisherman]

Never like to see these videos end, always appreciate the Medeski Martin and Wood when they do.

[@zsombordonko6459]

I've never thought about the noise a sheath can make. What an interesting perspective

[@andrewfuiten7124]

A good case trapper isn’t for everyone but it’s what I find most useful for me. Love the quality of the moras can’t beat it for the price. Love the show! SEMPER FI

[@CuttingEdgetools]

A heavy old school butcher knife worked just fine for Early Fur Trappers and First Nations people! That being said. Dave your video presentations are top notch 👍

[@magaman3048]

I use a Spyderco Delica 4 for everything. It has field dressed deer and tons of small game , cut open every Amazon box delivered, and sliced a lot of grilled steak. I always have it on me so it will probably work well surviving in a suburban apocalypse too.

[@samueljlarson]

For the first question, The White River Firecraft Pro series would have been a good option. Great topic today - love to see a table full of fixed blades!!

[@blueberry766]

And also a butcher old hickory knife, it's 1095 steel and you can change the scales or modify the tip

[@samueljlarson]

@@blueberry766 Budget minded - I agree. Overall quality is somewhat lacking though and the sheaths kind of suck (sorry). I'd go Mora over old hickory if pressed, but I'm a certified Mora fanboy at this point.

[@blueberry766]

@samueljlarson Yeah I agree aswell, I just like the old hickory more because you can modify it and make your own sheath aswell, and it's a full tang aswell and larger But the mora is really nice because you can just use it as intended and when it fails you just buy another

[@donovanruiz4404]

Thank you for all the videos and info over the years. I would love a recommendation on a small game/trout knife that can be a regular EDC. Thank you in advance.

[@mattconklin4026]

That would be neat

[@Limicola1]

What constitutes a "hunting" knife? I keep hearing about knives with "plenty of belly" for skinning but I remember a deer processing video put out some years ago by the Wisconsin DNR and the person processing the deer was a professional butcher. He skinned and processed the entire deer using a straight boning knife which literally has no belly for skinning. Light touches with the tip of the knife and lots of pulling and the hide was easily removed. Nowadays, it's pretty rare for anyone to skin their deer in the field. Most hunters will field dress their deer and be done with it. That requires a sharp, pointy knife to cut around the bowel and then some skill in gutting. My preferred tool for that is a curved serrated blade found on some SAKs or a drop point, clip point, or Nessmuk-style humped blade. Or use two fingers to lift the hide as you slice, so you don't cut the gut. Then, typically off it goes to the butcher (I butcher my own deer though) or if it's a guided hunt, often the guide will do the processing back at the camp. For small game like squirrels or rabbits, a slice or two here and there with a pocket knife and then the skinning is done by yanking the hide off by hand.

[@MotoNoir86]

The one you carry with you after you have experience, haha. I agree with you though. Can do just about everything with a 4-6” boning knife and/or havalon. I’ve never been around or seen anyone using the giant Rambo-style blades.

[@MotoNoir86]

Makes me curious about the esse AGK in s35vn as a do it all knife, though.

[@reidcreel5149]

Most of these knives have blades that pretty long for skinning anything other than a moose or brown bear. For whitetail you don’t need to make many cuts anyway. You can do most by simply pulling the hide away with your hands. Agree about processors using boning knives but they are comfortable using them as most of their need is more for breaking the deer down rather than skinning.

[@reidcreel5149]

@@MotoNoir86i use either an AGK or a benchmade hidden canyon. Both are excellent for skinning. AGK is well balanced with plenty of handle. Would be find for lighter bushcraft

[@MotoNoir86]

⁠@@reidcreel5149I did end up picking up an AGK. Like you said - great feel. Hope to put it to work this fall.

[@Watchdog_UFOtestpilot]

Benchmade Arvensis and Bushcrafter are my pack staples. I keep a SOCP and an old Nimravus in my get-home bag. I have OKC stuff too, but the Benchmade’s are my workhorse staples and Benchmade is local to me so I supported them pretty heavily. As they change their business model and supply/manufacturing, I may be supporting them less or leaving them completely, but for now I still do. The designer I like the most is Shane Sibert as his designs are insanely ergonomic and robust. His name is on most of my favorite Benchmade offerings, past and present.

[@crankythursdays]

Hi KC crew, while there’s no such thing as a true “one & done” or “unicorn” folding knife, there are some that check more boxes than others. Two knives that are often overlooked that I would love for you to compare and discuss are the Spyderco Sage 5 and Benchmade Mini Presidio II

[@alphaomegasurvivalsupply6548]

A good way to check if a spine is sharp enough to strike a ferro rod is to see if it will shave your fingernail in the same way, just scrape the spine down the top of your nail and if it produces shavings then more than likely it will strike a ferro rod as well.

[@adrianjagmag]

Is that easier than just sparking a Ferro rod? That's usually my go to test 😳

[@alphaomegasurvivalsupply6548]

@adrianjagmag well no but...sparking a rod in a store is usually frowned upon lol or you might not have a rod with you when you're looking at a knife, it actually works great try it lol.

[@BrokenBarBox]

Excellent advice! I never thought to try that

[@blueberry766]

​​@@alphaomegasurvivalsupply6548 not to mention that it basically degrades the product, I wouldn't do it unless am 300% buying it

[@jasonwebb4871]

Thank you for taking the time to answer, that was super helpful and nailed my intent! I see the LT Wright comes jn magna cut, that looks sweet, interesting handle options too. Any cons other than twice as expensive? Thanks again!

[@landscapingspecialist]

The best wood-splitting question is a great one this time of year. I use a BK-2 beat to piss. And it just keeps truckin’. But I’ve been wondering if there is a better choice for this exact task.

[@r.awilliams9815]

I have the Condor Hudson's Bay knife. It's an excellent knife for the price, but there are some things that I didn't like. The back of the bolster is sharp on the corners, and will tear your index finger up if you're not careful. A dremel took care of that. The edge grind was badly uneven, which was easy enough to fix, and I don't like the sheath. I'm having a mountain man style sheath made for it. Other than that, it's a good buy.

[@daveisntfunny]

Hey KC crew, the Spyderco Shaman and Strider SNG are two of my most carried folders and I would like to find a fixed blade that would complement/mirror them to carry. Had high hopes when I purchased the Enuff2 in K390(great knife!) but the handle is just slightly too short and thin for my mitts. Help me find a fixed blade that more or less matches the size, form factor, and blade to handle ratio of the Shaman/SNG…Thanks!

[@GeorgeMui]

Hey DCA! i heard that you said in this video that you like sharpening your knives primarily with a strop these days which peaked my interest to watch the sharpening video that you linked. While watching i saw that you included the use of sandpaper for reprofiling an edge if necessary, in the event of any edge damage. I want to get into learning how to sharpen and was wondering, is there any difference between your method of using sand paper and using diamond stones with a guided system like the worksharp pro precsion adjust? Like for example the ability to sharpen harder steel or the speed/efficency of the diamond stones vs sand paper? Sorry for the loaded question lol Thanks in advance for any advice!

[@knifecenter]

Diamonds will certainly cut faster, but the biggest difference is the resulting geometry between the two methods. Diamond stones will keep a flat edge, while the paper on top of the leather strop will result in a slight convex geometry. -DCA

[@GeorgeMui]

I see, thanks for the insight and the reply! 😁@@knifecenter

[@YoungKB]

Cold Steel Trail Master comes close to 8mm at 7.9mm (0.31in). And I think there are a few more in that thickness range. WTG?

[@The4cp]

I've always wanted to ask. Which is more useful a Nessmuck or a Kephart?

[@glbwoodsbum2567]

I would say the Kephart. The Kephart isn't as specializing as the Nessmuk. Its more utility

[@jhakimi69]

Hey DCA and Thomas, I recently got a non-stainless fixed blade knife but it didn't come with a sheath, so l'd apprechiate your recommendation on one. The knife blade is 7 inches long, and 2 inches wide (edge to spine), and a little over 12 inches overall. My preferences are the sheath should be able to withstand the elements (Kydex?), not retain water, and be able to attach a dangler so I can carry it easily without the handle poking into my abdomen. Bonus if the price is under $100. Thanks for being such an important part of the knife community!

[@BradGryphonn]

I like the Mora Basics but I've become a big fan of the Hultifors GK. Cheap and solid so you don't have to worry too much about abusing them.

[@bob_btw6751]

I am surprised you did not include a K Bar BK 2 in your selection. Heavy yes, but very versatile. I used to train for SAR work and choose a BK 2 because it cannot be broken, can be used as a pry bar, chopper, metal piercing ( small aircraft skin), batoning, some field woodcraft, or as a cook knife. Fits more into the survival knife category than hunting. I wish it had a textured handle though for a better grasp with leather gloves. Sheath is good for multiple attachment methods. Not doing SAR work now so is part of a 3 day+ get home bag.

[@pickuptruckreviews7085]

Question for a video I’m a firefighter and regularly wear a fixed blade on my belt but when I suit up to respond to a fire I put on a pullover fireproof pants and suspender rig extremely quickly and I find that I cannot get to my knife easily but because I have to suit up and get into a vehicle literally seconds after I get a alert I never have time to take off my belt or unhook the sheath from my regular pants to attach to my rigging do you have any recommendations for a fixed blade edc knife that can be removed from a belt and put on another on very quickly? Love the videos btw

[@LunarEclipsism1]

You probably want something with a clip plate to go on and off belts without removing the belt (like most of the ESEE fixed blades have) or a velcro loop (like the spartan harsey fighter) Something like an ESEE 4 with a belt clip plate is a good all-around option

[@andrewgreen5574]

A few of the Moras have belt clips, and most have button holes for buttons on your shirt or pants. Most are super cheap if you need to replace them readily.

[@simonstokes369]

That falkeneven is beautiful 🤩

[@JimLander]

Yes it is beautiful. Leads me to want one just to admire the craftsmanship!

[@WTF-Cubing]

I would trust the Cold Steel Drop Forged Hunter as my survival knife. I now own 4 Drop Forged series knives, the 52100 steel is one of my favourite steels of all time. If you wanna see how durable it is (and you have the belly for it…) watch Joe X’s destruction video of it. Spoiler: it took a glock shot to break it.

[@joshdoddadbod]

Still hunting for the best survival knife myself. My closest is the tops longhorn bowie and the tops tahoma. Ideally you want a 7-8 inch blade with a long handle for chopping if needed. Weight approx 1 lb, maybe a bit more or a bit less. The long blade allows spanning wood for batoning. For me as well part of it is animal defense and you need some reach to get at vital organs of wild animals. Ideally it is carried drop leg with a dangler and secured around your leg. This allows it to carry easily and you have quick access.

[@unfi6798]

Hi DCA & Thomas. Sorry to disappoint you gentlemen but our heirloom from great grandparents cost $25 and hasn't let us down yet. It's full tang 1095 with a wooden handle. Don't really know what kind of wood but we can see the wear & tear on it from years of usages. Are you sure T-Rex only have two claws.?? You might be right saying Joe Flowers probably be riding it....! Even we in Australia knows he's crazy but we love him that way. The man is a true legend. Cheers, be strong & prosperous.

[@brianmatthews3450]

Hey dca I've recently got into slip joints and want to get a "premium" one. I love the jack wolfs but are a bit outta my range. Looking to spend between $100 and $175 Single blade sheep's foot or warncliff, 3" max. With a higher end steel and a solid half stop. Any advice is helpful thanks

[@Chris_Mack]

@brianmatthews3450 How about the MKM Knives Jens Anso Root Slipjoint, seems like a perfect match kzbin.info/www/bejne/baLdpICBaKl3obMsi=9pNBjapZOGzvxT9i

[@spatialinterpretations449]

For wood processing would go for a full tang hatchet, there are plenty on the market, SOL camp, Silky NATA, tops Grandpa... would like to see a discussion on full tang mini hatchets and what is available

[@xst-k6]

Hi David, awesome video, love these FAQ type vids. Could you please do a series on how these knives have appreciated in price over the years (really curious about the NL4). I'd like to know if there are any collectable knifes out there.

[@alexpervanoglu7420]

8-10 mm thick knife which I have used to butcher a deer, and worked fairly well is my Boker Plus BOB.

[@griff7749]

Best value is probably the Architect Field buddy line. 3v, magnacut, tops 1095, USA made for the best prices.

[@nickiesiple5222]

10mm thick blafe, no, i dont know, but it still immediately brought to mind integral and skeletinized one piece, all metal knives. Boker makes and sells them.commercially. theres a handful of custom makers who specialize in them like Todd Begg.

[@Rye_Bread704]

Hey DCA and Thomas, I have a question I just got my first slipjoint a Victorinox tinker deluxe and the main blade doesn't have a half stop but the flat head does. Is there a Victorinox or good slip joint with a half stop and mirror finish? I am honestly impressed with a mirror polish on a knife, I have done it and it wasn't easy. Budget friendly ideally (below 75) but something higher end would be nice to see. Also is there a Victorinox without a mirror polish?

[@ChrisvilleUSA]

The camp 10 sheath is awesome I have it with a gerber prodigy as a companion

[@mountaingoattaichi]

Some cross-over hunting/survival would be Cold Steel Master Hunter or the ESEE 3 or 4. Even the Becker 16 is a good choice. My personal choice is the Mora Garberg. It does it all.

[@sbake388]

My EDC is a Buck 113. Can gut, skin, process, battan, ect. Full tang small for every day carry. It's never let me down. Stays sharp. Squared off spine.

[@daveruff47]

Go with the LT Wright; I did...

[@chrisjosekuehl]

For the big knives the Mora Pathfinder is a decent and affordable choice.

[@kydd666]

I'm surprised you didnt go with a Buck 119 for a hunting/survival knife, maybe in an upgraded steel that they offer now. Spend a few extra bucks and grab yourself a speedy sharp for fire steel striking and it doubles as an emergency knife sharpener

[@wiz3905]

Have you a video on tanto button flipper + thumb opener based on blade strength ( stress it takes for a blade to break) compared to overall outdoor utility from spliting wood to food preping compared to prices instead of high prices show case collector knives? I'm waiting on my first knife it is button lock, flipper + thumb opener, it's for slicing light yard work & learning. Looking for a heavier work tanto bc I like the versatility of tanto blade as a second practicol folding knife 3 - 3.5" blade about 4 inch handle.

[@nikwitter715]

Hi David, thanks for dropping so much knife knowledge. I am a viewer from Germany. I have a question: can you recommend a slicey EDC folding knife sub 200 USD, fidget friendly, easy to sharpen but a good Edge retention, nice to hold and open/close (unlike eg a Spyderco Manix 2). Ideally not an automatic. Thanks a lot! Nik

[@jufuh1503]

Hi DCA and Thomas, i'd like to know what to spot to make the difference between ball bearings and washers in the pivot? I've seen you just look at it, but i don't really see a difference between the two. Thanks fellas!

[@mythicalnarwhal]

Hi DCA and Thomas, could you explain what milled liners are for those who don’t know and what brands are brands are milling liners these days? Milled liners are a show of quality and attention to detail so it is good to know when a knife has it, especially since it’s not always mentioned in the product descriptions.

[@danielanthony9621]

Enjoyed your video. Just my personal preference I always carry 3 knives. Its practical for me and has become my always habit. If pinned down to just 1 knife I would go with a 4 to six inch bowie. Gotta go with a classic. Again good video, see ya on the trail.

[@nothim7321]

For the thick spine knife, the only ones I can think of are both TOPs knives, the little roughneck, and the operator 7

[@maddoxortiz3458]

Have y’all ever looked at Work Tuff Gear’s kodiak SK-85 knife? I would be really interested in seeing your take on this giant knife as well as it’s smaller counterpart, the wolverine

[@andrewfournier8817]

Every Esee from the 3, or maybe even the Izula, to at least the 6, is suitable. You might have to touch up a spot for the ferro rod. (Tops seem to be a bit more fragile than Esees). At a higher price point, Bark River has a lot of options.

[@adampoll4977]

Probably the best hybrid hunting/survival/camp knife is the old Puma White Hunter. Full tang, versatile blade shape with a "Scandi" profile false edge on a section of spine (that can be sharpened to a true edge), and a flat spot on the spine for hammering.

[@landscapingspecialist]

I’ve been on the lookout for an LT Wright for some time now. I had one I liked in my cart and when I came back to buy it, it was OOS ☹️

[@AronOutdoors]

A Bark River Bravo 1 or 1.25 might fit this need well. The Tops, LT Wright and Falkniven are really nice too.

[@natalyakeane]

im curious, if you could only have one (1) fixed blade and one (1) folder, which would they be? (unlimited budget, or if you have time at various budgets).

[@ilijabosnjak76]

I don’t have much to say because with so many choices how can you choose,there are suggestions but we’re All different.. I have over 50 knives and what now,can’t use them all but in my pocket is simple SAK, I can’t carry OKC SP-10…I settled on simple Mora Companion MG Carbon,it does everything except batoning for that purpose I have hatchet…

[@kingsclownvideos]

Thank you all for for this channel - my favorite! I will probably only do this once, so I’m looking for a $200 ambi edc pocket knife. Thank you for all you do.

[@donc5220]

I use my Can Opener on a SaK for a Striker since most dehydrated meals are bagged or cans have opening methods of their own i abuse the can opener..

[@lyndonmarquis414]

Hey, DCA and Thomas, thanks as ever for the great content - I’ve learned so much from this channel. I’m looking for a gentleman’s knife but UK-carry friendly. That means sub 3” and non-locking. Ideally, it should have one-handed opening but no flippers. Pocket clip too, please! Top-end £100. Thankyouplease!

[@Roccopaul73]

Great vid , do you know much on the white river knives?

[@chrishynes6091]

I keep a Mora Black and an old AF Survival knife (pre 80's) in the truck.

[@dennisleighton2812]

Hi David, Once again I see you including a Fallkniven example, but not the Cold Steel Master Hunter, and I keep wondering why not? Surely the Master Hunter (apart from its name) falls squarely within this group? I'd love to hear from you on this one. Cheers mate!

[@jonhughes2488]

Hello DCA and KC - I'm a big fan of the buck ranger 112 - the blade shape is still useful and versatile to this day, although not very fidgety due to its back lock. Do you have any suggestions for any similar modern knives to this icon. thanks

[@bobwampler3387]

The Kershaw Camp 10 is the best inexpensive chopper you can buy.

[@rofferdal]

Great FAQ, as always. I love a good “outdoor” knife. What do you consider to be the similarities and differences between requirements for survival, bushcraft and hunting knives?

[@CulturedHeathen]

The TOPS Operator 7 is 3/8+/- inches in thickness and could be used for hunting. Or splitting a carcass. Or chopping down trees. Or splitting fallen trees for firewood. Or for prying open doors/windows. Or for demo-ing the rest of the house. Or for attaching to your belt to keep the waistband of your pants from riding up. Or for.....

[@dutchanimal010]

I would love to see Joe Flowers riding a T Rex. Seems on-brand.

[@ronthompson2366]

I don't know if you have reviewed them or not. But can you do a review on a set of the Knives of Alaska knives ? Thank you.

[@TheFarmerTyler]

What magnacut OTF under $300 should I pick?

[@danofiremano]

My preferred crossover Hunting/Survival knife is my Spyderco Bushcraft UK. It's O-1 tool steel and a sharp spine with a leather sheath. Too bad it's a discontinued design!

[@knifecenter]

Those felt great in the hand! Too bad, indeed -DCA

[@BrysonDavis-yc7gh]

Hey DCA, had a question! This may be a question from ignorance, but I didn’t know besides Crucible and whoever makes the RPM9 steel, are there companies that make particle steels besides those and if so, what are they? Thank you

[@ezequielikonikoff]

Hi DCA, I missed the Ultem train. what's the deal? Besides being transparent...

[@BillLloyd-ew6rd]

Watch on KZbin all the time " great job guys!" Need an experts advice. Been a collector for an awful long time and I'm always looking for the next best thing. Here's my dilemma. I find myself breaking down a lot of cardboard boxes and find my EDCs enjoyably put to work. A utility knife with the blade fully extended works great BUT thats not nearly cool enough. Any ideas as far as blade shape and steel? Pride in ownership counts. Easy one hand opening a must. Looking forword to hear you think Thanks Bill

[@knifecenter]

My absolute cardboard destroyer is a K390 steel Delica -DCA

[@troymanning3150]

“Thanks” for “another” “great video”! “I” look “forward “ “to” the next “installment “ of “this” “series”.

[@kengarrett8657]

Could you please explain with examples the difference between a knife that would be a good one for striking a fire steel and one that is not and why. Thanks in advance

[@relic1300]

I know you're a drop point kinda guy, but I often have trouble distinguishing between some clip points and drop points. Could you explain the functional differences between the two?

[@shawnlowhorn5009]

A question just entered my head. Is it posable to make leather micarta? If so why hasnt anyone done that yet

[@Silviapepe]

Love these videos, the info is so helpful! Thanks Knife Center

[@rtz549]

Is the 510 worth having?

[@howlandthewind]

Hey, there DCA and crew! I do a lot of big food prep when I camp (whole birds, etc) and am used to using large, 8-10" chef's knives at home. I want a camp knife that can handle all of the usual camp tasks but which can also spatchcock a chicken or dice an onion without trouble. I'm a big fella with big hands so big knives (6-10 inches) are ideal. It can't have a finger guard as that just gets in the way for camp cooking tasks. And (here's the twist) I'm left-handed so right handed sheaths are no bueno. Looking for my sub-$200 unicorn. Thanks!

[@IIllIIllIIllIIll]

I saw a custom made left-handed fixed blade. Is that a thing? Or was I scammed? 😢

[@ModeShreddin]

Hey DCA. I'm newer to collecting knives ( this channel inspired me). My question is why do a lot of "outdoor knives" use carbon steel instead of something more stainless. If you're in the elements, I feel like a stainless steel would be an asset.

[@cylentone]

We need to find an additional name for a knife category. How many owners/users ever get in a survival situation? Hunting, camping, woodcrafting, and being prepared with a sturdy survival knife in a bugout or getback pack make sense, but one category is missing for an "allround/outdoors" knife. Lionsteel and Joker knives also have nice knives that would answer this request, at very different price points. BTW: Mora Robust and Companion Heavy Duty both have a 3.2mm blade, the Companion 2.1mm, all without a 90 degree spine which can be added by pulling it across sandpaper.

[@JROTCBALL]

Hey DCA! Been an avid Spyderco collector this past year.. definitely thinking about getting my first fix blade.. thinking about the Joker Campero since it comes with a fire steel.. how’s the spine on it though? Would it be able to strike with no mods needed? Thanks!

[@QenaitheCustodianGuard]

My Casström Lars Fält is awesome, big, nice to resharpen, beautiful handle and sheath.

[@myvids3115]

Some of it was „in the weeds“ worthy. LT Wright was a very nice option though.

[@ezequielikonikoff]

Hi DCA, which MKM Tango do you like best, both in blade shape and handle material?

[@ezequielikonikoff]

What was the inspiration for the name?

[@billvan5219]

Is this episode cm154 or cpm154? Ha, OCD steel combination bad joke. I hope baby DCA enjoyed the holidays. Keep up the good work, thank you all😊

[@abbeybremner4162]

Occasionally a custom hunting knife will have a super thick blade with deep hollow grind. Creates beauty with tang tapered at pommel. And ballance

[@LI_Fishing_and_Knives]

Esee Izula is always by my wood burning fireplace and handles 99% of what I need to produce kindling

[@gwpattrick]

I've got the Tops B.O.B, and it Is a good knife, but the back for the fire striker sucks. You'll have to sharpen it. And if you're talking ka-bar look at the Leathneck sf from coldsteel. The tang is like 3/4 wide with a rubber handle. Which these guys do sell.

[@archangelpastor]

I am about to go on a trip to a remote village in Alaska. One of the requests they have is for quality pocket knives. What would some options be for be for $50-150. The village I am going to are subsistence hunters/fishers.

[@bazzillionmlvs]

I live in New York so keep this on the down low lol. Looking for a good 100 to 200 $ budget otf knife. Was hoping you could give me some suggestions. Thanks.

[@lewisyouknow]

Needed a bark river bravo 1 in there, but great video

[@pounceonyou1958]

Bark River Bravo 1 LT with CPM.3V blade steel and micarta handle is the knife for the fella who wants a hunting/survival knife, best blade shape, profile and blade steel for this purpose, and best and most comfortable coke bottle handle shape out there.

[@B-leafer]

Dear DCA, cold steel trailmaster would be a great choice survival knife with thick spine..fyi. And contrary to your (professional) opinion, it is a SUPERIOR survival knife. I carry one usually daily! Second choice.. A handmade kukri from Nepal. Also a superior survival knife...and can be gotten relatively cheaply.

[@Strandlaeufer77]

Greetings DCA, Thomas and team! A question for the KniFAQ. I'm into ultralight backpacking and in most cases happy with my custom made Spydernox Midnight Honeybee coming at 32 grams. The problem is: food prepping is a pain. Any recommendations for ultralight folders for getting bread or a bell pepper sliced? Currently the Petzl Spartha is on my short list with 42 grams. Thx

[@ezequielikonikoff]

Hello DCA, happy new year! In FAQ episode 127 you exposed a collection of 7 knives, in case you could only have 7 knives. I wanted to know if you would trade one or more of them with any other knives that came out since then. Thanks and great work.

[@knifecenter]

Leatherman ARC instead of the FREE P2, all the rest the same :) -DCA

[@roostershooter76]

I'm really surprised you didn't mention the Becker BK7 or BK9. I know at least 5 guys who use them regularly for Elk hunting, and make processing Elk a breeze. Especially when it comes to breaking huge Elk Shoulder and Hip joints. Also, I'm curious as to who really manufactures Reiff knives! I've been trying to figure it out, and no one has an answer. Every time I send an email to the company, it goes unanswered. Kind of "Non Transparent" in my opinion.

[@knifecenter]

The Beckers are great, but won't strike a firesteel without mods. When you get into those price points there are other options that work better for the questioner's specific request. -DCA

[@dalevandenbussche5004]

I am thinking about getting a tactical pen I know nothing about them and I see they vary in price in one of your videos could you explain them further?

[@theoutdooradventureschanne8893]

I got the Ontario knife co set fron the smallest 7" to the 14 inch bucher blade had them professionally reground for 25$ cad each the best knives iv ever used and would trust with my life in the bush

[@paullambert4445]

I really like the Kephart style LT Wright with that beautiful JRE Industries sheath. Great video 🔪🎸