KnifeCenter FAQ #4: Best Delica, Washers Vs. Bearings, Best Whittling Knife, More!

[@03_austindrake88]

Love how Knife Center/DCA is putting out more videos now.

[@jojojaykay]

What’s dca

[@MaxBruch76]

Thanks for the nod to Felix!

[@jerrysimpson9224]

Dear Mr. Andersen and the rest of you at the knife center I really appreciate you getting back to me with a suggestion for my carving knife. And it’s funny I just ordered a Victoria Knox knife with a nail clipper. Also I went to Walmart and got a Kershaw hot fire it’s a nightmare especially for them. But I’m definitely gonna look into your suggestions once again thank you for responding back to me.

[@patrickharrison4746]

These videos are awesome, love learning all I can about different types of knives

[@damyr]

Question: What's the cheapest and what's the most expensive knife in KnifeCenter?

[@ryanharnell9268]

I totally get the conundrum of which modern classic with a pocket clip could replace the magic of my late 80's Buck 110 and 112. After being ticked that Buck hadn't figured that path out.. Ended up Brass Flytanium scaling an M4 Custom blackout - Mini Crooked River. Mission accomplished. Wish it could have been a buck though. Thanks for another great episode DCA! Now I get why those old slip joints had so many blade shapes in one. Meanwhile I'm packing different knives with different profiles for tasks. =)

[@TonberryV]

My Dude, perhaps direct them towards WE Knife for modern slip joints as well. There are also a lot of smaller french makers who make some sinfully beautiful slip joint knives. Stefan Schmalhaus does review a ton of knives that might appeal to that aesthetic.

[@chriss.9398]

This is my favorite and most informative knife channel on youtube!

[@stephangrobler5524]

The carving jack is king!

[@just-inedc2381]

I would say the spyderco pm2 would stay unchanged in 50 years but the leek is also a good pick. And I’ve never owned a delica but the the k390 version has really got me wanting to try one!

[@wmkid11]

I love the Leek, I have been using one for my work carry for over 10yrs and it is a workhorse.

[@bmarsh8343]

I ordered a Shaman dlc serrated a little over a week ago from Knife Center. It was the first time I've ever ordered from them but DEFINITELY not the last! They're in Fredericksburg VA and im all the way on the west coast In Oregon and got to me in 4 DAYS!!! I NEVER got a knife from Utah that fast! 🤙👍👏🙌

[@kevinwelker8486]

Best 2020 🔪 information format! Can not wait for more!

[@davidpalmer9014]

Thanks, Dave! I ended up ordering the Lionsteel 8210 ST, because I wanted something very small. Although now I have my eye on a Fox Livri.

[@knifecenter]

I especially like the Fox. Thanks for the question! -DCA

[@deanalbertson7203]

The Delica in ZDP-189 steel is also very good.

[@artemkanarchist]

Blimey, k390 delica might be just the perfect knife for me

[@skycorrigan6511]

I am very impressed with K390. I found a Spyderco Ladybug with it.

[@tonycanniffe2360]

It’s a great steel. I’ve had an Urban in K390 for a few years. Feels more like Cruwear than a 10V class steel; easy to strop back and not too hard to sharpen. Good to see it rolled out to more models (finally!).

[@artemkanarchist]

Tony Canniffe well, that sounds really great!

[@knifecharlatan8912]

Unchanged 50+ year classic: Benchmade Osborne 940

[@PulledPurk]

I 2nd the Case Half Whittler. The pen blade is my favorite.

[@hectorramirez5973]

Dave, great idea to use this platform to address the knife community specific needs and concerns!! How's that for customer service!! Mark my words, you will soon be known in the community as the "knife-advisor"!! Kudos and great work. I'll be sending my questions soon and excited to hear your recommendation. It will pay your organization with increased sales.

[@GrumpyGrunt]

My favorite Delica is the Manix 2. 🤣 MKM is trying hard to make me want a slipjoint.

[@Ryan_the_tinz]

I have that MKM Fara and it's so gorgeous. But I just really need one hand opening for EDC. It's also too heavy and bulky in the sheath for an inside suit pocket. It's still my date knife though.

[@leepinnguin9682]

I'd like to see you grab each knife like you are going to use it. I'm a rather large person 6'3" 250lbs and I have trouble with the grips on many knives.

[@chirongis]

Great presentation Mr Andersen!

[@mdunawaym]

Thank you for you answer on the best whittling knives. My girlfriend is totally blind, and I decided to start whittling things for her as gifts. I love the Boker, but it is no longer available. The first one seems like it would be difficult to sharpen and maintain. Do you have any other current models to recommend? I'm currently using the Case Tony Bose sow belly.

[@PoetFisherman]

Love the Medeski Martin and Wood outro

[@arig5988]

What’s up David? My only question maybe you could review for next time would be, what’s the fastest way to sharpen a harder steel like s30v (in a hurry, i.e. a work environment) but without damaging the blade or getting the angle wrong? Are field sharpeners the way to go? I’m always afraid I’ll do more harm than good to the original edge grind.

[@knifeaddict1014]

Another great video I just purchased a lt wright patriot for feather sticking and carving!!!

[@briandunn5861]

The mkm fara in aluminum is a great knife!

[@wizardofahhhs759]

Bearing knives should have a flush-out hole to fit a straw that comes with every can of WD-40, RemOil or whatever to spray it out clean.

[@Snaggums]

What are some versatile multi tool options for working on a motorcycle and/or leather working? I’ve got a Leatherman Crunch, which is awesome for locking onto bolts, but doesn’t have much versatility otherwise. The serrated blade isn’t super useful, and my other bulkier wrenches/screwdrivers are inevitably way better to carry around. It’s also bad for one-handed operation. I’ve also noticed some multi tools come with awls, which would be cool for my leatherworking. Any suggestions? Thanks!

[@Ryan_the_tinz]

The Protech Malibu is another manual button lock knife. Hard to find in stock though. I have the BT Fighter. It's a great knife for the price range. DCA, how many knives do you personally own and what are your top 3?

[@keats27]

MR. ANDERSEN....best chance to be another Buck 110 - mini griptilian, delica....loves me my VG10...VG10 delica is $84...fancy scales? super super steel? EDC, I'll keep my base delica. If I'm going up over $100, I'm going mini griptilian or SpyOpera.

[@Cj12sings]

Really love this stuff, since you are doing fantastic in depth stuff how about a full series on all the Swiss Army knives...

[@MeerkatMotorBoards]

Great concept for a video, I learned a lot!

[@darksi226]

Great pick with the leak. Love that knife. Funny enough, the delica would have been a great pick too. Question: I’ve seen fellow knifeheads use a strip in very different ways. Some slide it slowly and meticulously, as if it is a sharpening stone. Others strop at 90 mph and are less concerned with the exact angle. With all things equal (strop and compound) what method do you recommend?

[@knifecenter]

Moderate speed, light pressure -DCA

[@charlescollier7217]

Mr. Andersen, I confess to being guilty of giving you the Anglicized Swedish version of the name. My apologies. As always, the video was thoroughly enjoyable. I'm not sure how I missed it earlier. In any event, I thought that the question about an unchanged classic 50 years from now was answered by the next question - Which Delica is best?

[@knifecenter]

No way on the Delica. The 4th Gen current knife looks very different from the first gen knife. The name will undoubtedly still be around, but it'll certainly not be "unchanged" (which is a good thing for us customers!) Cheers my friend -DCA

[@charlescollier7217]

@@knifecenter fair point!

[@djadis187]

Unchanged classic (s) 50 years from now....Griptilian and Endura/Delica

[@knifecenter]

I'd say the Spydercos aren't eligible because they keep improving the designs. My Gen 3 delica is very different from the newer Gen 4 and I bet they keep doing that, which in the end is great for us consumers!

[@TheProfessordank]

RAT one/two is a knife that could go unchanged for 50 years.

[@ddoutt3023]

A coworker is looking for a$50 dollar or less knife. Preferably made in USA but not necessarily. He likes a flipper and has larger than average hands. What do you recommend

[@AlexanderSLeBlanc]

Nothing good in the US is made for under $50 except for a couple of Kershaw models. Look at Kershaw Link

[@terrylew6565]

My Hogue X1 detent is so stiff that it's impossible to deploy it using your push button technique. Either that or my slightly smaller than average hands are not strong enough . . .

[@The4cp]

I'd say Delica Paramilitary 2 from Spyderco and the 940 from Benchmade even though like the Leak I personally don't like those 2. In 50 years all 4 will still be around.

[@lukak8639]

I have question that's not about knifes itself but its knife related. When is time to change the sharpening stones? How long can they last? :)

[@knifecenter]

When they are no longer flat, they should either be discarded or flattened with a lapping stone.

[@lukak8639]

@@knifecenter thanks 😉

[@jotade2098]

the extro music is great, who isi it?

[@pauljosephbuggle3722]

So what about the European market? Any chance of KnifeCenter opening an online European branch to save all the importing bother and costs for the Old World customers. We are at a disadvantage in cost and choice.

[@outdoorwatchnorway3678]

Great video, hello from Norway..

[@dengarr7636]

Nicely done 👍

[@teddysmith457]

Taylor knife company has some old school folders

[@noah_9886]

Hey Mr. Andersen, do you think there’d be a way to mod the new benchmade Osborn switchblade to be assisted opening instead? California frowns on the button openers but assisted seems to be ok. I’m interested in purchasing if you think a mod is remotely possible. I know you normally don’t comment on such topics but if you haves physical one with you, I wouldn’t mind your perspective Thanks!

[@knifecenter]

Highly doubtful. It would take an entirely different mechanism on the inside.

[@BladeWalker77]

Very interesting, thanks. Do You think omega spring on axis lock knives can easily rust? Are they reliable around the sea? Another question is: I would like to see your selection of the best slicers.

[@knifecenter]

What kind of slicers... kitchen knives?

[@BladeWalker77]

@@knifecenter actually I was thinking on pocket knives, but the idea to show some good kitchen knife is not bad in my opinion. Maybe there are viewers interested. My question: could You show a good selection of kitchen knives for professional use?. Ciao from Italy

[@tungsten_kirbide]

What are the best high quality “hard” use knives under $250?

[@The4cp]

Cold Steel Recon 1

[@knifecenter]

Several good ones here: kzbin.info/www/bejne/gKWYpGWlYq5seMk

[@alkishararis9347]

Hello!!! Spyderco have H1 and LC200N.What is the "stain proof" steel option for Benchmade??? 😀😀😀

[@lonestarpatriot876]

I know they have LC200N.

[@SKVektus]

The Benchmade 940 seems pretty timeless to me.

[@StuffSharpEnough]

Bugout will be a candidate too.

[@carbonitegamorrean8368]

Best Whittling Knife ""OLD TIMER SPLINTER CARVING KNIFE"" and super cheap too. I have one and it works unbelievably, I see zero dif in the Flex cut and the tools on mine, as in probably same manufacture (I dont know)

[@thePanther07]

Do you ship to Namibia? Alot of the knives you feature is not available here through local stores.

[@knifecenter]

Yes sir, we do ship to Namibia.

[@clintonlewis1261]

Great stuff!

[@uzumlubay]

Are teflon and phosphor bronze washers interchangeable???

[@knifecenter]

As long as they are the same spec (size, thickness, etc) it ought to be.

[@PulledPurk]

Leek soup is my favorite soup

[@morganmessina]

Hey Mr Andersen, I love my knives but do you ha e a recommendation on a folding knife that doesn’t click during opening and closing? I really love my Bugout but it drives my girlfriend crazy. Click click click click

[@Deeznuts-wb9pf]

Can you recommend more knives like the Benchmade outlast?

[@knifecenter]

I can't really think of any more modern two big blade folders like that. It is pretty unique in the market.

[@Deeznuts-wb9pf]

KnifeCenter thank you for the reply!

[@nafnlaus]

I think the Benchmade 940 Osborne will still be going strong and largely unchanged in 50 years.

[@The4cp]

Best Delica is the Emerson Wave with a Wise Men signat ring.

[@skycorrigan6511]

Louie C Anderson

[@brianwhitelaw7483]

The Benchmade 940 stands a great chance of remaining unchanged for 50 years

[@The4cp]

I agree and I dislike the knife lol

[@brianwhitelaw7483]

I have one with carbon fiber scales. I love the knife. And it’s already 20 years since it debuted.

[@Ryan_the_tinz]

The 940-2 is my next purchase. Definitely a classic.

[@andrewyouells7889]

I hate a 940 for 20 years didn't realize it was the collectors edition my blade is pretty wore I wonder how much it will cost for a new blade

[@brianwhitelaw7483]

Andrew Youells About $35.www.bladeforums.com/threads/benchmade-replacing-blades.1155887/

[@DinoNucci]

People still buy Spyderco?

[@patrickplymanii9679]

Ha always gotta take a leek That’s a knee slapper A hoot even

[@Pippinm7]

50 years from now... benchmade bugout and I don’t even have one

[@talkeetna911ify]

Evidently you don't stock Schrader Whittier or you would have gave them a second place 😂

[@andrewdanger2830]

the text is too big, covers the video.

[@mityjoeyoung8855]

Every Case knife I've ever bought had a terrible fit and finish. Turned out to be complete garbage as well. I don't see them being in business long if your going to sell nothing but expensive junk. Come on case get with it. They charge almost as much as GEC does. But GEC is high quality. I would never buy a case knife again. Especially that for 20 - 25 more I can get a GEC.

[@cameronchicken8439]

video title doesn’t match the first ten minutes

[@caslinden1373]

First

[@jamescase7612]

Terrible company I tryed to buy a knife for 40 min and had to buy it from Amazon payed 2 dollars more but 3 min done I wouldnt buy a beater from this guy

[@jayjaska8963]

Just...how did it take you so long? Even when setting up an account and my address and card info took like 10-15 minutes. Are you just not very good with computers?

[@jamescase7612]

Buddy iam very serious so just lose my email its the truth so iam not saying another thing I dont talk BS leave it as it is by

[@jayjaska8963]

@@jamescase7612 Dude, you got heated over a mild comment. Also I don't have your email because this site is designed so that people can reply to comments. you don't have to reply, I am just saying that you shouldn't smear a company for your own faults. now them continuing to sell knives that advertise s30v but are 5cr is something else.

[@jamescase7612]

Stop J were done for ever Just leave me alone I will never consider your company again 2 min on Amazon I was done cost 2 dollars more but I got it so please go away thank you good by