KNX Tutorial 1 : Programming of basic lighting

[@carlobaroncini5864]

Thank you very much indeed for this tutorial .It was very helpful for me. I liked it very much because you explained STEP by STEP. That is the way it should be for a beginner like myself. You are a star.

[@andrewhiv1728]

Great KNX Tutorial . Want to learn more advance lighting like Dali, RGBW, and Scenes, KNX Shades and Binds, KNX HVAC and a few best visualization and remote devices

[@tuberg007]

Thank you Gohar! It very nice that you are engaged to make such video tutorials, appreciate for your further tutorials as well. Good luck!

[@KNX-expert]

My pleasure 😊

[@fawazoden6295]

Great tutorial, well explained in detail..Thanks

[@MDARLtd]

Wow, thanks for making this video, it has REALLY helped my research. I now know that I made the right choice by going for .........

[@afzaalahmad2964]

really well explanation and its very helpful for KNX beginners thank you so much

[@KNX-expert]

You are welcome.

[@abhiav2810]

really well explanation and its very helpful for KNX beginners thank you so much please keep doing :) :)

[@medjehfaal5721]

Yes sir thanks for your information it's really helpful next month I will be having exam on knx

[@rees2284]

great job! keep it up....

[@KNX-expert]

Thanks for your feedback.

[@fatso4424]

Thanks for the good explanation

[@canad900]

Hello sir, A very big thanks and thumbs up, for this 1hour tutorials, More vedios to come😊

[@petersimon2584]

Hey, thanks for making this tutorial, it was pretty easy to understand and quite helpful

[@TheRamonciin97]

Thanks for the video, it was a very clear explanation.

[@ahmadalkubaisi6905]

Thanks brother, appreciate your effort

[@cesarXP_1504]

Great tutorial, really well explanation. Thanks :)

[@abdelilahabdelilah6657]

so helpful tutorial!!! thank you, I wish for more tutorial videos and how to generate the mobile app if you don't mind!!!! Thanks again

[@kulwindersingh8529]

Hi sir Good tech to video

[@styde2]

Thank you!!! Great!

[@twoursgaming3821]

Hey man, I want to say this tutorial has opened a whole new KNX experience for me. I really enjoyed it and you were so good at explaining how things work, please continue these videos they’re great and thanks to you I will be using KNX in my new home! I have one question, when would you use the yellow & grey cable from the KNX cable? I know the red & black are always used but never seen the yellow & grey used.

[@KNX-expert]

The yellow and grey used for auxiliary power. Most of the touch screen needs auxiliary power 24vdc too.

[@hamidnajafi8203]

Excellent, can you also provide knx project files. or gather all knx tutorials altogether with est inside? many thanks

[@nikhilvaswani1585]

Hey great and very informative video ! thanks a ton

[@satsunmedia1320]

Hi sir, Thanks for your Good effort. I got everything clearly.

[@satsunmedia1320]

I have few doubts. 1.ABB presence sensor and one of my on/off button assigned for some light. But while ON the light by button it goes OFF after the sensors delay time. 2.How to set Time based Control to a Light Ex: Night 10PM to morning 5AM I want to Auto Turn on a Light.

[@satsunmedia1320]

My Mail ID: [e-mail]

[@KNX-expert]

For abb you need to disable the write flags. For the other you need a device to have time functions on it.

[@mohamedelsafty8782]

thanks

[@raghavarajuy7049]

Thank you so much sir, keep doing such Knx video.

[@raghavarajuy7049]

Hii sir, I'm raju from vijayawada Plz make an video of Knx sound automation.

[@janakawicks1148]

Thank you . keep up the good work

[@grzegorzrzepnicki9170]

Hi!. Great work. Thank You. I Have one technical quwstion. Please tell me how to change the name of the Goup object as You do it in this material. ex time 1:12:32. I cant do it in ETS 6 in this place

[@florinoancea1899]

Thank you, very useful!

[@twoursgaming3821]

Hey man, I have everything with lights going, dimming and turn/off however, I have a GIRA 2225 00 Presence Detector and I just cannot figure out how to get it to turn on a light (channel) from the actuator Any help?

[@KNX-expert]

Connect FB1 - output 1 to the light you want to control. And go select no (brightness independent option). In the parameters FB1 - brightness evaluation

[@twoursgaming3821]

@@KNX-expert mate, you are truly the greatest. Thank you very much.

[@michaelkopp7341]

What if someone could post the links to the catalog database files here in thread. Especially for the Gira control. Could not make out that URL. Seems to no longer be available.

[@safinsharo7627]

Thank you brother

[@colmbrowne2788]

Super detailed video, many thanks. Just wondering what the 3 spare group address for each light might be used for?

[@KNX-expert]

It makes to group addresses easy to read. You can squeeze other group address like pir master/ slave or others if required later.

[@JaikumarreddyNAGA]

Hi gohar this is very helpful to me can you ple make some video on mdt knx protocol push button BE-TAS86X.02 and mdt dimmer and mdt Dali 64 how to program this

[@miladparvizy3348]

Hi Thanks for your lovely video, just i quick question I need to change Gira 514200 switch, but I don’t have any idea how to program it! Because it’s not same as this one Thanks in advance

[@raze96]

Thank you kind man

[@asincerealgerian6298]

Thanks Rashid

[@KNX-expert]

You are welcome

[@jnuwan4214]

hi thanks and very useful. can you describe how to turn on stair lights only if dark and motion detect. thanks

[@KNX-expert]

I will make another video focusing only on staircase lighting with PIR and Pushbutton.

[@mahammadsathalya647]

Hello , I really Learn lot from your videos ...I want to ask you that there is an Extra options came at top Next to APPs option How to get that .. for exporting opc file .. ?? for IPCC center..

[@KNX-expert]

Sorry Mate, I don't understand your request.

[@williamvanginkel2802]

Thanks for this video! Really helpful. Very clear step-by-step explanation! Is there a way I can simulate my installation? Like push the buttons and see what happens?

[@MsTommyknocker]

Do you know if it is possible to make a KNX with a PLC interface?

[@KNX-expert]

Never worked on PLC. Sorry no idea

[@abumaimunah908]

Link example program?🙏

[@mahammadsathalya647]

Hello Sir , Thanks for the informaitve video ..can you provide that Gira switch download file .....

[@KNX-expert]

download.gira.de/en_GB/index.html?id=3027 Download Product database (ETS5). Then import this to ETS then you should be able to find all the gira devices database files there.

[@mahammadsathalya647]

@@KNX-expert thanks.. Looking forward for more videos regarding knx lighting control..

[@Binthen]

Hi, it is our pleasure to offer you a groundbreaking solution for Binthen shading system- Standard KNX Motorized Curtain Kit, which is a standard package from 2.2 meters to 8.2 meters, all your pain points will be solved.

[@sabeurbenali1091]

please how we can download ets6 virtual ?

[@MsTommyknocker]

I always get that KNX power supply is incompatible with line's media type.

[@MsTommyknocker]

Where does the power supply need to be is what I am asking.

[@MsTommyknocker]

In which line should you put the equipment, is what I am basically trying to ask.

[@KNX-expert]

Most of the power supply don't have individual address. It had to wire correctly.

[@MsTommyknocker]

@@KNX-expert When I try to put the SA/S8 device in my topology, it says that there was an error while trying to access the online catalog server. Do you know this problem?

[@MsTommyknocker]

Which market have you set for the online catalog?

[@boubkerabdo2619]

Bonjour, j'ai besoin d'apprendre ets5, avez vous un PDF qui explique tout ça, merci d'avance

[@tommycandra0k3]

thank you

[@carlobaroncini5864]

can you write your linkeding please?

[@perfekttaeletrica5231]

Dear Gohard we dont have study materials about knx in my country. Could you indicate some source of information?

[@KNX-expert]

Knx.org

[@genuinetechniques9323]

Hi, I would like to contact you to discuss about knx

[@ionutmoldovan6302]

Hi, I'm new to knx programming, you can give me a course that has applications, and by the way how can I download knx simulator, I tried to download it but it asks me for a company code and I like your tutorials on KZbin

[@brayanbustamante6494]

Me puede enviar el trabajo plss

[@KNX-expert]

I don't know what you mean?

[@Mohendarsumanth]

Hi, Plase share me PDF file..

[@Marko8809]

Hello, first of all thank you very much for great tutorials. I have one question. As I read in KNX materials KNX component has BCU (Bus coupling unit) which are checking in some interval the status of AM (Application modul). So for me it looks like even KNX components are not doing anything they are consuming electricity. So simple KNX switch is doing that too. So may question is: Is it really money saving approach comparing to the old style when you have simple switch without any electronic devices and mechanically turn on/off the light for example?

[@KNX-expert]

Simple switch don't consume any power but it's very limited. You can't turn on/off a light from 10 or more different location on a simple switch.

[@KNX-expert]

It's mainly comfort.

[@gowthamsumartgowtham5118]

Hi sir I have doubt in knx software NETXBMS 2.0 ,if more details I will send the mail if your ok,please send mail Id

[@thegunman3682]

It's not mandatory to use English.... You can use both language equally

[@KNX-expert]

Yes you are right. I can use all three languages.