Konica Minolta bizhub c754e High Voltage HV Board replacement

[@fabiodesalterain634]

Hello. I have a c558. The cyan developing unit ejects all developer. The technician told me that it could be a false contact on the PCR roller or that no current was coming from the high voltage plate. How can I measure the currents of the plate to make sure the fault is there?

[@PrestigeOfficeSolutions]

There's not an easy answer to your question. best thing for you is to ask your technician and see if he's willing to spend the time to show you how to do so.

[@scanneradteco2]

Hola buenas tardes colega .A mi tambien me pasa lo mismo en mi caso tengo C654E y despues de varias impresiones me bota el revelador cyan. Ya he probado con otras unidades y pasa lo mismo. Que prodria ser ?

[@11johel]

HOLA TAMBIÉN ME SUCEDE LO MISMO

[@fabiodesalterain634]

@@scanneradteco2 Yo acabo de encargar una unidad de revelado y un revelador nuevo. En teoría ahí estaría el problema. Espero que con eso se solucione, voy gastando muchísimo dinero y aun no puedo hacer andar la máquina .( TAMBIÉN CON EL CYAN)

[@11johel]

Amigo también gastado mucho dinero para solucionar ..​@@fabiodesalterain634

[@GabrieleLodesani981]

Good morning, I have a c454e on which I replaced the HV board because it printed white, I replaced the board with a new Minolta A5C1M4060 spare part but it still continues to print white. Does it need to be regulated or registered in any particular way? Thank you very much for helping. Greetings from Italy.

[@PrestigeOfficeSolutions]

i wouldn't of started with a HV board. you have something going on which requires onsite troubleshooting to pin point the reason for blank copies....

[@ChideraSB-hx1gf]

Wow amazing .. what’s the problem that can makes me to replace high voltage board ..

[@PrestigeOfficeSolutions]

not sure i understand your question

[@fabiodesalterain634]

@@ChideraSB-hx1gf Yo hice revisar la placa de alto voltaje en un laboratorio y me dijeron que estaba bien.

[@shalomravi328]

why do you want to replace a high voltage board??

[@mohamedlouchgui879]

Bonjour monsieur cv moi j'ai un technicien réparation des imprimantes konica minolta et ricoh et canon

[@bereketatu]

why do you want to replace a high voltage board?

[@PrestigeOfficeSolutions]

I don't want to replace it but someone out there might