Tap to unmute

Making a Massive Hammer

  Рет қаралды 206,261

Koss

Koss

Күн бұрын

Пікірлер
@RIBill
@RIBill 2 жыл бұрын
It looks awesome and I know it's entirely for appearance. However, I would have eased all those sharp edges to keep them from being stress risers for the inevitable time when someone DOES hit something with it or drops it or whatever.
@VG-or1nu
@VG-or1nu 2 жыл бұрын
Yeah but it looks swag tho
@thelt4255
@thelt4255 2 жыл бұрын
yea round those so it dont crack please it looks dope
@Volt64bolt
@Volt64bolt 2 жыл бұрын
I would say just a nice small chamfer would work just fine and keep the astechic
@karimjewelry
@karimjewelry 2 жыл бұрын
🙏🙏👍👏
@billozy
@billozy 2 жыл бұрын
Those edges give you +10% critical hit
@SilvaTheLegoViking
@SilvaTheLegoViking 2 жыл бұрын
I’ve been watching your videos for almost two years now and this is the first time I’ve commented. Awesome work!
@JarrellHall
@JarrellHall Жыл бұрын
With this and the Dwarven knife. You earned yourself a subscriber and soon a customer!
@UniverseUA
@UniverseUA 2 жыл бұрын
The hammer is so perfect the thumbnail looks like a render
@lindawallace6750
@lindawallace6750 2 жыл бұрын
BEAUTIFUL !!!
@ΜΞΔΣΛ
@ΜΞΔΣΛ 2 жыл бұрын
Wow it’s great craftsmanship, Odin will love this
@ВалерийБеликов-щ1н
@ВалерийБеликов-щ1н Жыл бұрын
My friend... The Cool Cool Cool.
@TheLordofthewolf
@TheLordofthewolf 2 жыл бұрын
blacksmith Andre of Astora would be proud of you and your work
@creativeinhead965
@creativeinhead965 2 жыл бұрын
Wow! it's just PERFECT!!! I can't believe my eyes... It's just GREAT. Thanks👍
@kvnmg
@kvnmg Жыл бұрын
It's thor's hammer. Beautiful ! Thank's for this video ❤️ 😊
@lordofgraphite
@lordofgraphite 2 жыл бұрын
This is absolutely ridiculous, I love it
@jerryjohnsonii4181
@jerryjohnsonii4181 2 жыл бұрын
Spectacular Hammer !!!!!!!!!!
@strokerace5468
@strokerace5468 2 жыл бұрын
WOW. Very nice job
@nickdavis5420
@nickdavis5420 2 жыл бұрын
A fine workout tool
@knucklecorn
@knucklecorn 2 жыл бұрын
This is the Square Hammer Ghost told us about
@vinceianni4026
@vinceianni4026 2 жыл бұрын
Hello Koss beautiful hammer beautifully made beautiful designs well done friend
@AlreadyDeadInside83079
@AlreadyDeadInside83079 2 жыл бұрын
Gorgeous
@Valhalla3826
@Valhalla3826 2 жыл бұрын
Beautiful craftsmanship
@Destros2ndone
@Destros2ndone 2 жыл бұрын
that's one crazy cool looking hammer :D
@unnatiatram1409
@unnatiatram1409 10 ай бұрын
Great work you had done salute you
@dclipper8052
@dclipper8052 2 жыл бұрын
A round handle is fine for a bat or a club but not for a weapon that needs to be clocked a specific way. I would suggest gluing leather strips lengthwise along the front and back of the handle to make it oblong and then wrapping the whole thing.
@tinyfin981
@tinyfin981 2 жыл бұрын
Koss that’s absolutely beautiful man. You’ve outdone yourself with this one.
@octopus2327
@octopus2327 2 жыл бұрын
ikr
@Koss-channel
@Koss-channel 2 жыл бұрын
thank you =)
@chrisgenovese8188
@chrisgenovese8188 2 жыл бұрын
Love it! you have such a recognizable style that is very pleasing to the eye.
@moneyfornothing3264
@moneyfornothing3264 2 жыл бұрын
Beautiful!! 🔥
@jimtaylor6663
@jimtaylor6663 2 жыл бұрын
That is so cool!
@MeltAbilities
@MeltAbilities 2 жыл бұрын
Like always… ‼️Nice‼️
@pjhalchemy
@pjhalchemy 2 жыл бұрын
You never cease to amaze me with your ingenuity, craftsmanship and designs, Koss! Beautiful work and superb etchings. Must have taken a lot of time, plus the heat treating. Surprised you didn't chamfer the faces though. Thanks for the Treat as Always...magical!!
@connorbest2121
@connorbest2121 2 жыл бұрын
now that’s what i call a machinist’s hammer.
@RestorationAustralia
@RestorationAustralia 2 жыл бұрын
Very cool.👍
@CJ_7519
@CJ_7519 2 жыл бұрын
Thor would approve👍🔨!!
@Captainalexstars94er
@Captainalexstars94er 2 жыл бұрын
No Way koss, you making a Beautiful Hammer? That Looks so Cool 😎
@YooProjects
@YooProjects 2 жыл бұрын
Special project. I like the engraving style. 💫
@vladimirkovacevic1656
@vladimirkovacevic1656 2 жыл бұрын
awesome hammer
@SamakUp
@SamakUp 2 жыл бұрын
Beautiful
@RaccoonLex
@RaccoonLex 2 жыл бұрын
Really nice
@ladyrosalynnn
@ladyrosalynnn 2 жыл бұрын
This rocks.
@diyresttube
@diyresttube 2 жыл бұрын
thats really a beautifull hammer..its like a masterpiece.
@johnbradford9235
@johnbradford9235 2 жыл бұрын
Had to pause the vid a couple of seconds in and go check outside to make sure the world was still there when I saw this wasn't a knife 😂. But I knew it was still gonna be a quality job and I'm not disappointed 👉👉👉. Lovely finish dude. Sure you don't wanna sneak a sliding blade in the end of the stock...? 😉😁😁😁😎
@joeblow9891
@joeblow9891 2 жыл бұрын
I really love your content since I discovered you, but it would be amazing if you would test your absolutely beautyful pieces of art at the end. I would have like to see you hammer something or at least happer your wood bench !
@butterflywoodworks2374
@butterflywoodworks2374 2 жыл бұрын
Question for the machinists, why use a surfacing grinder to square up the stock rather than the mill?
@koalabro6118
@koalabro6118 2 жыл бұрын
Asked my pops - who has been a Machinist for as long as I've known him - and he said that the big thing about surface grinders is that they are *high* precision. Mills are high precision (precision within a thousandth of an inch (0.001 of an inch)), but surface grinders are comically so (precision within a micron (1/26,000 of an inch)). They are also incredibly slow, if used properly. Dude here is taking a larger depth of cut than he should, and has a higher stepover than he should, as is evidenced by his surface finish. Most likely, this dude doesn't have a mill, and is merely using what he has available to him.
@koalabro6118
@koalabro6118 2 жыл бұрын
wait he does have a mill wtf.
@butterflywoodworks2374
@butterflywoodworks2374 2 жыл бұрын
@@koalabro6118 , thanks for that.
@InfernoPhilM
@InfernoPhilM 2 жыл бұрын
You’re going to have the most tender chicken ever 🐓🔨
@CorbinMusso88
@CorbinMusso88 2 жыл бұрын
Yeah, he can really beat his meat with that one.
@mikean7074
@mikean7074 2 жыл бұрын
Why not human meat instead of an innocent creature?
@Zildawolf
@Zildawolf 2 жыл бұрын
@@mikean7074 chicken tastey
@benjaelee
@benjaelee 2 жыл бұрын
@@Zildawolf -human tastey too- wait what?
@Zildawolf
@Zildawolf 2 жыл бұрын
@@benjaelee no it’s not
@maxo9711
@maxo9711 2 жыл бұрын
Good job 👍
@АнтониоПетров-я7щ
@АнтониоПетров-я7щ 2 жыл бұрын
Дорогой Брат, шикарный получился молот, достойный самого Бога Грома Тора!!!! Да ещё в скандинавском стиле!!!! Лайк, респект и море уважения!!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
@styx5977
@styx5977 2 жыл бұрын
Imagine making that beast out of titanium 💪💀
@SSKfamilytv
@SSKfamilytv 2 жыл бұрын
Amazing skills 👏 good job👍
@juanjo5534
@juanjo5534 Жыл бұрын
If every hammer be like that, we would all be carpenters.
@firstname1661
@firstname1661 2 жыл бұрын
New version of Thor, the mighty God of Thunder... Wonderful job..
@madwilliamflint
@madwilliamflint 2 жыл бұрын
Nice work as always. Really love that etching technique. I'm going to have to give that a try. I wasn't sure why you didn't do your surfacing on the mill with a fly-cutter. But then I walked it through in my head and realized I had no idea how to secure the workpiece.
@dwilliams321
@dwilliams321 2 жыл бұрын
I think it would look great with a 45° chamfer all around, but it's so good looking without it too!
@chain669
@chain669 Жыл бұрын
Красавец Мьёльнир))
@datta_girish
@datta_girish 2 жыл бұрын
Love It
@northwales1000
@northwales1000 2 жыл бұрын
Make for a great Lament configuration hammer. Have the various design on each facet
@zzAleksandrzz
@zzAleksandrzz 2 жыл бұрын
Отличная работа 💪👍🔥
@kennyspratling9386
@kennyspratling9386 2 жыл бұрын
Beautiful hammer. I bet taking a bronze wire brush to the center section would have looked awesome too. But still a very beautiful hammer
@WinchesterxNL
@WinchesterxNL 2 жыл бұрын
Whosoever holds this hammer, if he be worthy, shall possess the power of Koss.
@paranoiia8
@paranoiia8 2 жыл бұрын
Chunkus maximus!
@MCsCreations
@MCsCreations 2 жыл бұрын
Amazing, dude! Fantastic work!!! 😃 That's a real work of art! Stay safe there with your family! 🖖😊
@jojo1711
@jojo1711 2 жыл бұрын
once again a real masterpiece congratulations for your work
@AmiraliKianfar
@AmiraliKianfar 2 жыл бұрын
Nice !! But handle is very short!!! Well done good job
@Dev_2R
@Dev_2R Жыл бұрын
I was disappointed when you didn't try to cut paper with it. Super cool hammer though, I always love your workmanship.
@kirillch
@kirillch 2 жыл бұрын
I like the video. Beautiful thing. However is it legal to post such flashes from welding
@GarageArt
@GarageArt 2 жыл бұрын
Чудова робота
@O-SV
@O-SV 2 жыл бұрын
wow ⚡
@chrishuhn5065
@chrishuhn5065 2 жыл бұрын
The pendant looks nice. Now hurry up and make a matching necklace. Mr T. is getting impatient.
@rhodie33
@rhodie33 2 жыл бұрын
Been watching your vids for awhile now and you always creating your own unique tools. Nice job Sir.
@bc8010
@bc8010 2 жыл бұрын
I think it actually looked really cool straight out of the oil. Great results nonetheless
@edgaraquino2324
@edgaraquino2324 2 жыл бұрын
Well what about that! We have seen Thor's hammer in theory, now we have Koss' Hammer live & in living color! Beautiful work! P.S. The Hammer looks great as is, but may I suggest adding leather to the handle for esthetics & grip, along with a length of leather for a "wristlet" to give it a "battle hammer" look....
@geraldstamour1312
@geraldstamour1312 Жыл бұрын
🎶It's HAMMER time!🎵
@christophertmunro4503
@christophertmunro4503 2 жыл бұрын
THOR'S HAMMER!!!!!!!!
@persioboni9373
@persioboni9373 2 жыл бұрын
Perfeito trabalho !
@DH-.
@DH-. Жыл бұрын
I would love to see an elegant equally intimidating nail an or rock chisel to match a set or something
@Official.ORIENTCAVALIER
@Official.ORIENTCAVALIER 2 жыл бұрын
I see the insignia on the side of the hammer was heavily inspired by Legendary ent. logo. Looks ok, though
@Zraeicro
@Zraeicro 2 жыл бұрын
9:40 flashbang button
@lilllamaboi
@lilllamaboi 2 жыл бұрын
Why surface grind the rough shape? Why not face mill it first to save time on the grinder?
@dantedragonico5238
@dantedragonico5238 2 жыл бұрын
Thor: It's Good, but mine is bigger.
@Scrogan
@Scrogan 2 жыл бұрын
What’s the etching electrolyte?
@andymurphy9016
@andymurphy9016 2 жыл бұрын
The sharp edges look dangerous, though. Why not round them a bit?
@tejaskondgekar5509
@tejaskondgekar5509 Жыл бұрын
This must be the little brother of Mjöllnir Mjollnir 😜😜
@SkateboardCaes
@SkateboardCaes 2 жыл бұрын
Koss, who do you deem worthy?
@hugogarutti2071
@hugogarutti2071 2 жыл бұрын
Nice work! How much does it weighs?
@БоровПажилой
@БоровПажилой 2 жыл бұрын
Отлично, лайк не глядя
@punknoodles0
@punknoodles0 2 жыл бұрын
Yoooooooo...please be careful when grinding on the side of that wheel.
@aswd90
@aswd90 Жыл бұрын
"What do you plan to do with that hammer, friend? Bring down a house?"
@andriypetrunin9678
@andriypetrunin9678 2 жыл бұрын
Гарно. Краще пінцет купіть в стомат техніці) А ви звідки?
@eddietowers5595
@eddietowers5595 2 жыл бұрын
Why does you lathe seem to change frequency every time you cut metal with it? Like the machine can't hand such light cuts. Though still an awesome piece
@Air-l5u
@Air-l5u 2 жыл бұрын
This is not a hammer. It's art.
@scottcraft1000
@scottcraft1000 Жыл бұрын
When it goes flying out the window don't worry, Thor just called for it lol
@lolcec81
@lolcec81 2 жыл бұрын
Отлично!!!
@infamoushacker4chan883
@infamoushacker4chan883 Жыл бұрын
9:38 Bro, why does your MIG sound like that? What is your voltage on?
@k7l3rworkman97
@k7l3rworkman97 2 жыл бұрын
I want it 😁
@BHLFPS3
@BHLFPS3 2 жыл бұрын
if i had this hammer there wouldnt be a day im not in the front yard trying to summon thunder lol
@GnosisMan50
@GnosisMan50 2 жыл бұрын
I need 100 of them....lol
@punknoodles0
@punknoodles0 2 жыл бұрын
That's not a hammer... THIS ^ is a hammer.
@DIEGOLOKO82
@DIEGOLOKO82 2 жыл бұрын
this reminds me of a song by Ghost
@SynthRockViking
@SynthRockViking 2 жыл бұрын
Wow looks so nice 😮 Im jealousss, that im too lazy to do shittt😭
@SynthRockViking
@SynthRockViking 2 жыл бұрын
Btw must've taken a really long long ass time grinding those surfaces plane:O
@filipesiilva5602
@filipesiilva5602 2 жыл бұрын
Can a hammer like this be used to forge?
@davidhall8874
@davidhall8874 Жыл бұрын
How does that block stay in place with nothing holding it?
@Rage.Slayer
@Rage.Slayer Жыл бұрын
when u flat grinding this things didnt u need cooling lubricant that ur grind wheel dosnt go broke? and did the metal dosnt overheat and damage the structur of the metal. (English is not my main language xD)
@21street-erfication90
@21street-erfication90 Жыл бұрын
Only those who are deemed worthy, may wield Mulnir.
@mushfiqurrahman2515
@mushfiqurrahman2515 2 жыл бұрын
neat
Making a Manual Transmission Pen
14:43
Maker B
Рет қаралды 5 МЛН
Making a Machinist Hammer (but TINY) || INHERITANCE MACHINING
15:16
Inheritance Machining
Рет қаралды 711 М.
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
"For $35,000 I'd Expect it to be Perfect"
42:13
Blacktail Studio
Рет қаралды 5 МЛН
Dagger Making - Scrap Spring Steel Dagger
22:57
Make N' Create
Рет қаралды 366 М.
Japanese Saw Restoration... With Lasers
22:16
Blacktail Studio
Рет қаралды 3,9 МЛН
Old NORDIC hammer Restoration with AMAZING outcome
13:07
Awesome Restorations
Рет қаралды 7 МЛН
Making This War Hammer From Start To Finish
26:11
Black Beard Projects
Рет қаралды 4,1 МЛН
Knife Making - Faceted Knife
13:04
Koss
Рет қаралды 518 М.
How To Make a Hand-Engraved Hammer with Simple Tools
15:57
Uri Tuchman
Рет қаралды 1,6 МЛН
Making Brass Machinist Hammer
13:27
Koss
Рет қаралды 1 МЛН