In this episode we weather the aircraft . My Patreon pages are at www.patreon.co...
Пікірлер: 41
@johnmarley6695 Жыл бұрын
Ok.....I’m off to buy some of those pencils! A great result.
@TheModelShed Жыл бұрын
Thanks John
@johntreloar8203 Жыл бұрын
Looking good Steve, I also don't like to over weather my kits.
@TheModelShed Жыл бұрын
Thanks John
@JamesA2 Жыл бұрын
Interesting info re: the Tamiya polishing wax, Steve. I have never heard of it before today. It seems to give that elusive sheen that I am always trying to acheive with a matt finish. Cheers. James (I just have to try and find some now)
@TheModelShed Жыл бұрын
it’s good stuff James - I get mine from Poland
@mickrobinson1112 Жыл бұрын
great work on weathering, thanks for information on where leaks come from
@TheModelShed Жыл бұрын
You’re welcome Mick
@danl.909 Жыл бұрын
Hi, Steve. Another way to avoid having to re-shake an enamel wash constantly: Shake the wash thoroughly and use a soft plastic pipette to suck up a little of the pigmented stuff from the bottom of the jar. Empty the pipette into a small measuring cup and use that to wet your panel lining brush. When that’s used up, re-shake the jar and repeat. Cheers and thanks for the vid’.
@TheModelShed Жыл бұрын
Great tip Dan - I’ll try that
@brianwatson1965 Жыл бұрын
She's looking beautiful Steve..........
@TheModelShed Жыл бұрын
Thanks Brian
@nigelcook4016 Жыл бұрын
nice work Steve , have been using the panel line wash for about a year now and swear by them , if you find the wash a bit stark on the black, mix some of the grey wash into it
@TheModelShed Жыл бұрын
Yes Nigel I’ll experiment with a different shade before I tackle my 1/32 Lancaster - too risky to mess that one up.
@richardbailey3343 Жыл бұрын
Lovely job point of interest some of those spits their footwalks were worn to bare metal😮😊 regards
@TheModelShed Жыл бұрын
Thanks Richard 👍
@Exgasman9072 Жыл бұрын
Very impressive
@TheModelShed Жыл бұрын
Cheers Bill
@raleighlamb3324 Жыл бұрын
I agree with you completely on that "wash for black" product. It was far too stark, too much contrast. Everything looks amazing, chipping looks realistic! Looking forward to the next update!
@TheModelShed Жыл бұрын
Thank you
@FinsburyPhil Жыл бұрын
I really like the look of the restrained weathering Steve. Excellent work again.
@TheModelShed Жыл бұрын
Thank you Phil
@SMAZVidoes Жыл бұрын
Great result. I like the idea of applying the Tamiya wax. I will definitely give this technique a try.
@TheModelShed Жыл бұрын
Do - it helps the final finish
@chrisbrown-ed6du Жыл бұрын
That chipping looks great what a fantastic job you are doing on it
@TheModelShed Жыл бұрын
Thanks Chris
@lesthiele4921 Жыл бұрын
Greetings Steve, the Spitfire is looking absolutely brilliant, you have done a outstanding job, looking forwarx to the next update, bedtvregarcs from a Kiwi living in Australia 👍👍👍👍
@TheModelShed Жыл бұрын
Cheers Les 👍
@michaelwebb4312 Жыл бұрын
Fantastic build as always and very good modelling advice can’t wait to start mine
@TheModelShed Жыл бұрын
Thanks and you’re welcome Michael
@dlthomson5287 Жыл бұрын
A fantastic weathering job on the Spit, it gives a worn and grubby look to an aircraft that has seen plenty of use. For the black have you thought about trying a mix of Tamiya XF-1 flat black and Tamiya XF-64 red brown? It is suppose to be what's called a 'scale black' good for kits from 1/72-1/32 scale. Keep up the excellent work.
@TheModelShed Жыл бұрын
I’ll take a look at that mix sounds like it might work
@dlthomson5287 Жыл бұрын
@@TheModelShed The mix is a 50/50. Forgot to add that in the original reply.
@ApriliaRSV4F Жыл бұрын
Looking very nice. How do you think a mid to dark grey wash would go on the underside?
@TheModelShed Жыл бұрын
it would be better I think . I’ll experiment before painting my Lancaster - lots of black on that one
@johnboy384 Жыл бұрын
Lovely.
@TheModelShed Жыл бұрын
Thank you
@georginaofarrell9254 Жыл бұрын
It's looking every bit a Spitfire.
@TheModelShed Жыл бұрын
It does indeed and you’ve got to love a spitfire
@richmondtigers7495 Жыл бұрын
Is the wax in lieu of final Matt coat?
@TheModelShed Жыл бұрын
No it goes over the final Matt coat - I don’t paint over the wax after it’s applied