The Best 3D printed RC project EVERMADE! MJET Jetboat put through HELL!

  Рет қаралды 98,932

kpopRC

kpopRC

Күн бұрын

Пікірлер: 226
@mjetdevelopment
@mjetdevelopment Жыл бұрын
Thank you so much for featuring me! I am absolutely happy to see people having fun with this design😀 I was also thrilled to watch the nicest shots of this boat I could not even imagine!
@zacharias_b
@zacharias_b Жыл бұрын
impressive work dude!
@kpopRC
@kpopRC Жыл бұрын
best 3d printed rc platform ever created. you deserve massive credit Štěpán
@aut0bahn
@aut0bahn Жыл бұрын
You guys are living the dream! Inspirational 😊
@aviatoFPV
@aviatoFPV Жыл бұрын
Thank you for the incredible design! I'll be ordering and building one for sure! These jet pumps are such cool pieces of engineering. Love it!
@drluketheduke1531
@drluketheduke1531 Жыл бұрын
Awesome! Ty! 🍻 subbed!!
@MyraHodgkiss
@MyraHodgkiss Жыл бұрын
crazy that you can make a custom jet boat out of files from the internet, technology is so cool
@toddbertram6556
@toddbertram6556 Жыл бұрын
I agree in a way but what really is 'crazy' anymore. The world around us is nothing but novel stories and exceptions to the rule.
@BoostFiend_Bud
@BoostFiend_Bud Жыл бұрын
As a 3d printer hobbyist who has just started getting into 24th scale RC and mini battlebots, I'm thankful the algorithm decided to show me this. Got a new subscriber good sir, looking forward to all the content I've missed so far and what's to come.
@ChampTruex
@ChampTruex Жыл бұрын
that boat was alot of fun to print and bash! i now have a few 3d printed boats, working on a dual outboard boat now with 3660s great video
@MetalHeadRCGarage
@MetalHeadRCGarage Жыл бұрын
That was dope! Loved seeing the journey from the Bambu assembly, through the build, epic bashing, and hull cracking finish. That camera work was on point! Looked like an absolute blast of a day.🤘🏻Jet boats are soo sick! Such a cool niche part of the RC boating segment. Superb vid Kpop..💥🔥
@tjwalker997
@tjwalker997 Жыл бұрын
Ide like to see you print one 200% bigger. All the RC things you make are incredible man keep up the wicked content 🤘
@kpopRC
@kpopRC Жыл бұрын
that's a pretty great idea.. i'd need a larger printer...... hrmmmmm.
@tjwalker997
@tjwalker997 Жыл бұрын
@@kpopRC even just a test print in multiple slices to see if the idea would even work. Like to upscale the impeller and gearbox just to be sure it would still work like the original 🤔
@theELiTEboarder
@theELiTEboarder Жыл бұрын
I printed my m-jet probably 2 years ago now and I love it! I designed some of the mods in the mods folder such as the ride plate and the passive bilge pump hull and I'd highly recommend at least trying my ride plate mod, it made mine much more stable overall!
@kpopRC
@kpopRC Жыл бұрын
tried your ride plate mod. it loosens up very easy. and end up falling off. we're tough on our boats. that one bolt holding it in doesn't cut it.
@theELiTEboarder
@theELiTEboarder Жыл бұрын
@@kpopRC I definitely don't send mine off rocks like you guys do. If you do like the way it rides with it you could epoxy one onto that impeller housing and print a spare without the ride plate and swap the whole housing if you want to change the ride characteristics. Thanks for the feedback and for trying it!
@smoothrc28
@smoothrc28 Жыл бұрын
Great video!!! Awesome Jet boat!! Never seen a boat dig a hole in water before!!👍👍👏👏👏💪💪🔥🔥Thanks For Sharing!!!👍👍
@varuns00
@varuns00 5 ай бұрын
Do a 12ft 1 person fully 3D printed electric jet boat, structural parts all printed on a 256x256x256 max blocks, interlocking fits, and finally fiberglass it... and take it to the lake... I am sure that is enough content for at least 5 long episodes, and certain sponsorship opportunities.
@Ghosty-RC
@Ghosty-RC 5 ай бұрын
I'm printing the Superprint right now. So I'm rewatching your video. Now I CAN'T wait for the print to be finished. P.s. love the Procet Binky part- MUCH love to BOM!
@scalebuildersguild
@scalebuildersguild Жыл бұрын
Absolutely killer. What a fun video.
@jacobwilliamson8406
@jacobwilliamson8406 Жыл бұрын
production quality is amazing. one of your best videos
@DoubleClutchProductions
@DoubleClutchProductions Жыл бұрын
I'm straight up getting one! BAMBU RC Jet boat here I come! Banger KpopRC!
@rc.remedy
@rc.remedy Жыл бұрын
What an absolute water borne weapon! Brilliant design work..
@stratton78ja
@stratton78ja Жыл бұрын
Badass boat!!! An absolutely amazing spot to go play!!!!
@meticulous_rc
@meticulous_rc Жыл бұрын
I love your videos bro. Amazing content. I was actually thinking about getting this exact printer and now I’m done thinking. Lol I’m gonna order one. Keep up the amazing content brother. Just getting better and better!!!
@ianwollstein8974
@ianwollstein8974 Жыл бұрын
Incredible build and design. The 3D printer looks to be amazing! Seems the boat hull design is for super flat water and be interested to see a river/mini jet boat design hull with the same mechanics in it 🤓
@kpopRC
@kpopRC Жыл бұрын
it's actually based on the race jetboats hull design. And it' works very well in the river maybe because the power to weight ratio is so much more than a 1:1. Im pressing m jet to make an adapter for the pro boat hull. but that's in the air.
@chrisalexander6447
@chrisalexander6447 Жыл бұрын
Jetboats look so fun!
@10thScaleGarage
@10thScaleGarage Жыл бұрын
Ugh. Your videos look so gorgeous. Fantastic work. Awesome boat. Now build a giant one….. Next video, “I built an RC replica of Cleetus McFarland’s Sprint Boat!”
@kolasaRC
@kolasaRC 5 ай бұрын
that's some quality content right there. keep em comin from Alberta Canada❤❤❤
@mickd8188
@mickd8188 Жыл бұрын
Your video creations are always amazing Kpop.. Love your style. Cheers 👍
@TyJoe_N_MattyMoe
@TyJoe_N_MattyMoe Жыл бұрын
That is a sick printable boat. I want that printer too. I loved watching it submarine and porpose out of the water. I was kinda hoping to see Matt (SBG) biff it and go for a dip.😂
@justonjacoby4455
@justonjacoby4455 Жыл бұрын
Outstanding video
@JPspinFPV
@JPspinFPV Жыл бұрын
That lil boat rips!
@TheTankRC
@TheTankRC 5 ай бұрын
Great build and great video well done
@pint_size_crawler
@pint_size_crawler Жыл бұрын
Lol I am sold on both the boat and printer. Know what I am doing next spring! 🙌😍🔥
@BlindGuyRc
@BlindGuyRc Жыл бұрын
Awesome video man. You guys beat that boat. Amd it just kept going eh. Whatever breaks. Reprint. Super cool. 😎👍👍
@layoutdeluxe
@layoutdeluxe Жыл бұрын
What a build! I want one too bad - does it come with a creek!? I wished there was water closer to me.... you make this hobby so much FUN!
@kpopRC
@kpopRC Жыл бұрын
there's gotta be a creek or something haha! even a swimming pool. but it's true with out a good creek or river, it's not as much fun.
@layoutdeluxe
@layoutdeluxe Жыл бұрын
@@kpopRC There is a creek up in the mountains, four hours from here, that we visit a few times a year. The last times it didn't have much rain/snow, so water level is very low. I did take a Proboat Jetjam and put a ridiculous brushless system in it. Acts like a salmon (great paint scheme LOL) going up the creek! But it's very small and not very stable. The impeller sucks in too much dirt and air when going over ground and rocks. I do like that 3D printer - has been in my future plans for a while already! Keep up the great entertainment!
@blacksheeprc8113
@blacksheeprc8113 Жыл бұрын
Killer build man
@Spor777
@Spor777 Жыл бұрын
Awesome as always.
@TS34675
@TS34675 Жыл бұрын
That looks like so much fun, and beautiful location. I've been looking at the BL for a while and I just might have to sell my budget printers. Tired of constantly tinkering to make the printer work.
@NFEzantiszar
@NFEzantiszar Жыл бұрын
Well he just got the printer I've been eyeing for a while
@kpopRC
@kpopRC Жыл бұрын
NICE! it's so good. it works so well. i'll be printing tpu soon. and have been printing abs, and petg cf, as well as pla tough.
@sladeb6036
@sladeb6036 Жыл бұрын
Hell yeah brother. So sick.
@bluegroovemodelsports9650
@bluegroovemodelsports9650 Жыл бұрын
Very cool project
@antonioramirez-gw3cw
@antonioramirez-gw3cw Жыл бұрын
Sent it all the way, awesome dude
@VS666
@VS666 Жыл бұрын
holy crap what an episode!!! i've really been itching to get into 3D printing for RC stuff specifically and this thing looks like it fits the bill perfectly. $1500 is really not that much considering what we pay for our large scales. i just recently got into boats myself so this episode really resonated with me. consider me sold on this printer AND jet boat project! also, +1 for the Binky reference 🤣
@Laterdays2
@Laterdays2 Жыл бұрын
Wow! Just wow!
@CLCIII
@CLCIII Жыл бұрын
Definitely make it 1/5 or even better 1/4 scale and run with 6S! Please Sir!
@kpopRC
@kpopRC Жыл бұрын
i can run this boat 6s.
@tandr3w
@tandr3w 3 ай бұрын
I wonder if 2 metal rails on the bottom of the boat would help it survive being launched of rocks better. I would like to see this boat printed a little bit bigger. I would also like to see a jet boat variant modeled after James Bond Q boat.
@kpopRC
@kpopRC 2 ай бұрын
There are already 2 new boat hull designs. find M-jet on fb, and see how far these boats have come. even 3rd party guys designing hulls specifically for mjet pump designs. im actually stoked for you to see how awesome this has all evolved.
@oishialloadmin
@oishialloadmin Жыл бұрын
strongly reminds me of the NQD jetboat of years ago.. awesome boat! this one is proper.. the NQD needed a lot of modding to become any good.
@kpopRC
@kpopRC Жыл бұрын
yeah the nqd.. i was watching some of my old videos with that boat. it's SLOW. lol. this thing is just a monster.
@oishialloadmin
@oishialloadmin Жыл бұрын
@@kpopRC you kept the original jet drive in the NQD.. I didn't :)
@scottydoo46
@scottydoo46 Жыл бұрын
That boats ace
@brettsulman9408
@brettsulman9408 Жыл бұрын
Awesome bit of gear. Mate is printing me the boat. Looking at your shopping list! 4mm shaft but the bearings are 3mm I/D? And noticed your motor had 5mm shaft? So you just Drilles out the coupler? Thanks Brett
@kpopRC
@kpopRC Жыл бұрын
oh shit. good catch. ill fix that
@kpopRC
@kpopRC Жыл бұрын
they sold out. and also offered different sizes. so now the link took you to all but the size you need. new link found and pasted in.
@brettsulman9408
@brettsulman9408 Жыл бұрын
@@kpopRC ✌🏼🤣
@JIPPERR_1
@JIPPERR_1 Жыл бұрын
I gotta know if this thing survives!!
@kevinhainsworth9293
@kevinhainsworth9293 Жыл бұрын
Just to be clear, on the o rings, is it the 8mmx4mmx2mm rings? There’s a lot of choices there
@kpopRC
@kpopRC Жыл бұрын
hey dude, correct! 4x rubber O-ring; OD=8mm, ID=4mm, thickness=2mm
@parker73724
@parker73724 Жыл бұрын
I wonder if this would work with light weight pla. I have no idea if it's strong enough though because I've never used it.
@kpopRC
@kpopRC Жыл бұрын
once you put the esc batt and servo in there, this thing is not light. and sits low on the water. not sure if saving 3 grams of weight is going to do anything but create a more brittle hull. what's the point? so far petg cf is great for the hulls. even then the epoxy is the real strength on these boats.
@vinnnocc
@vinnnocc Жыл бұрын
Wait a min did I get an X1 combo before you? Your the one who got me into 3d printing back in 2013 hahaha with the 240 drift car project
@kpopRC
@kpopRC Жыл бұрын
YES BUDDY! happy printing bro! I hope you dont hate me for it. lol.
@vinnnocc
@vinnnocc Жыл бұрын
@@kpopRC I love 3d printing. Wife not so much hahaha
@ninja1970fin
@ninja1970fin Жыл бұрын
it should be flat on the bottom so it would jump cleaner. very very cool though!! good job :)
@kpopRC
@kpopRC Жыл бұрын
the jet boat shape is specifically designed to keep the bow pointing straight. this design has been taken from real race jetboats. and is needed or else you won't be able to hold any turn.
@ninja1970fin
@ninja1970fin Жыл бұрын
@@kpopRC ah ok!
@olliea7805
@olliea7805 Жыл бұрын
Does this boat have any relation or history with the quikjet? Just wondering because this looks like a very simular boat in design other than the pump/impeller being quite different. Ive been using the quikjet hull design modified with a larger 38mm pump for several years now reliably. These jetboats are a blast
@kpopRC
@kpopRC Жыл бұрын
no relation to quick jet.
@187jaded
@187jaded Жыл бұрын
Epic!!!
@hotboyracing
@hotboyracing Жыл бұрын
Make a 1/5 scale version of the higher power pump design
@nikitasilantev6966
@nikitasilantev6966 6 ай бұрын
Great Video! What battery is he using?
@kpopRC
@kpopRC 5 ай бұрын
amazon specials, a set of Zeee 14.8V 4S Lipo Battery 120C 1500mAh, and a set of CNHL 4S 1500mAh Lipo Battery 14.8V 100C
@ninja1970fin
@ninja1970fin Жыл бұрын
YESS!!!
@owlarmsgaming4948
@owlarmsgaming4948 Жыл бұрын
I love the fact you listed everything on how to make this boat and where to get the stuff, though i feel you could have broken this video up in 3 different ones and spent more time talking about t Bambu and their printers and showing in real time the print of the boat, plus a whole video on making and assembling the boat and talking about the creator a little more. then a whole video you guys going nuts on the water
@kpopRC
@kpopRC Жыл бұрын
yeah. but i didn't. and the bambu is a permanent fixture in the lab. I am still learning how to use it to it's fullest. Let me own it for more than a month please. and you need to understand there is a whole game to be played with youtube, don't hate the player hate the game.
@denjeansan
@denjeansan Жыл бұрын
Damn you kpopRC now i want one 🤣🤣
@kpopRC
@kpopRC Жыл бұрын
muahahahaha! DO IT! LOL.
@denjeansan
@denjeansan Жыл бұрын
@@kpopRC you can bet your ass on it 😁😀 and you keep making those epic scalemovies. With the slowmo's damnnn.
@carloshnunez
@carloshnunez Жыл бұрын
Wow that is awesome 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@slowstang88
@slowstang88 Жыл бұрын
I put a Graupner jet in a vacuformed crackerbox hull in the early 2000s with a reedy 480 motor and 7.2 NIMH pack, it was a fuckin blast!
@nickoel3456
@nickoel3456 Жыл бұрын
How large of platform is needed to print this boat
@kpopRC
@kpopRC Жыл бұрын
FDM 3D Printer of a minimum build volume 185mm x 150mm build plate x 200mm height
@rajgill7576
@rajgill7576 10 ай бұрын
Its hard for me to get an estimate on mobile, but how much did the bill of materials cost you? Ive got filament and a bambu printer, debating making this
@kpopRC
@kpopRC 10 ай бұрын
less than a roll. screws were 10 dollars. motor esc combo is about 120 dollars. all in under 200us.
@Sniper_ShotX
@Sniper_ShotX Жыл бұрын
Will you sell the pump and the hole boat Is minus the electronics
@kpopRC
@kpopRC Жыл бұрын
sorry dude. im not a print farm.
@EdwardChew
@EdwardChew Жыл бұрын
I see a R34 mini z shell there 😉😉
@HellaNorCal916
@HellaNorCal916 Жыл бұрын
Everyone and their brother has a Bambu Lab printer now days. Everyone I've watched featuring one is sold on them.
@kpopRC
@kpopRC Жыл бұрын
this is the switch from finicky opensource roughness, to a full house hold appliance. I haven't even shown off the abs and tpu and all the other engineering materials this thing prints with no issue.
@wayneanderson9995
@wayneanderson9995 Жыл бұрын
I want one for r/c fishing!
@EJ-74
@EJ-74 Жыл бұрын
Cool build, I've got to get one of those printers, I'd build so many boats and planes etc my wife would lose her shite!!! 😂🤣😂🤣
@kpopRC
@kpopRC Жыл бұрын
dooooooo it. lol.
@EJ-74
@EJ-74 Жыл бұрын
@@kpopRC 😁
@jeremiahsahlberg2096
@jeremiahsahlberg2096 Жыл бұрын
Bro you had me sold on that printer when u said it poops
@drluketheduke1531
@drluketheduke1531 Жыл бұрын
Subbed …subbed… hell yea!! 🍻🍻
@kpopRC
@kpopRC Жыл бұрын
Welcome! glad to have you!
@jeffgillig
@jeffgillig Жыл бұрын
How does yours not leak constantly mine does
@kpopRC
@kpopRC Жыл бұрын
make sure the hull isn't cracked. don't use unshielded ceramic bearings. use a finger of grease on the nitro fuel tubing. and zip tie your cooling lines. make sure your motor cooling jacket isnt' leaking. at 2150kv we get 1tbsp of water every 5 min or so.
@sladeb6036
@sladeb6036 Жыл бұрын
Bro you have to build the big boy boat.
@hiruma0116
@hiruma0116 Жыл бұрын
真棒~
@JYates89coupe
@JYates89coupe Жыл бұрын
Going to try this build on my ender neo using petg wish me luck!
@kpopRC
@kpopRC Жыл бұрын
print the single blade prop pla. pla is stronger. petg for hull works as well! you'll have a blast!
@jvsyoutube3298
@jvsyoutube3298 Жыл бұрын
that looks cool as heck! the amazon shoppinglist doesent work, i only get my own shopping list :(
@kpopRC
@kpopRC Жыл бұрын
Amazon is being weird. so i listed everything as individual links.
@404Droid
@404Droid Жыл бұрын
Yes you need to print the bigger better jet And no you don't need a $5 servo $4 HobbyKing will work just fine😂. Check out the Kwikjet I've been wanting to build 1 of M Jets but I got three kwik Jets😊 they're bigger and a little bit better but the streams have been low ineed the smaller mjet.
@kpopRC
@kpopRC Жыл бұрын
Oh, i have one too. and this the m jet sprint pump has more thrust than the bigger kwik single impellor no stator design.
@rdw6156
@rdw6156 Жыл бұрын
Where did you get the amazon delivery bag lol
@kpopRC
@kpopRC Жыл бұрын
amazon delivery people like to leave them at the top of the 3rd floor. after the 3rd day. i just grab it.
@michaeldev5962
@michaeldev5962 Жыл бұрын
I want that boat😂
@kollak01
@kollak01 Жыл бұрын
wish i knew someone with a 3d printer to print it for me.
@youknoweverything7643
@youknoweverything7643 Жыл бұрын
I been building big beautiful rc aircraft that look absolutely stunning after sanding smoothing and nice paint jobs and same wit rc boats and racing fpv drones and even self guided highly advanced gos based video filming drones for videoing sports events stock car races ect.
@ripmax333
@ripmax333 Жыл бұрын
Did you printed the Hull in Vase Mode?
@kpopRC
@kpopRC Жыл бұрын
no. there are a ton of mounting points and channels for cooling, and a motor mount. and there is also a chamber for the auto righting feature. none of which would allow for vase mode.
@alainbellemare2168
@alainbellemare2168 10 ай бұрын
How uch does a printer cost
@alainbellemare2168
@alainbellemare2168 10 ай бұрын
Much
@kpopRC
@kpopRC 8 ай бұрын
creality printer that will make you cry more than once, 200us dollars, the bambu lab x1 carbon that is literally push button printing, is about 2 grand.
@Ghosty-RC
@Ghosty-RC 8 ай бұрын
Did you build his bigger Boat? It's the Ragnarok, right?
@chadditz7827
@chadditz7827 11 ай бұрын
Werw can i find the stl files
@kpopRC
@kpopRC 11 ай бұрын
you have to buy them from the link in the description.
@ninthislandrc
@ninthislandrc Жыл бұрын
As cool as that printer is, and all the features is has, I wouldn't consider almost $1,500 "affordable". Most people 'struggle' when it comes to paying more than $700-750 for a 3D printer. That's why more people go with the Ender 3 & 5, Prusa Mini, and similar. As for the boat...TOTALLY COOL!!! 🤙🏼
@kpopRC
@kpopRC Жыл бұрын
as some one who's lived in the world of cheap printers. my fav was the kit version of the prusa which was 1000 dollars. and this KNOCKS IT OUT OF THE PARK. the problem with what you are offering at a lower price point is your not accounting for the amount of wasted filament and wasted time calibrating and troubleshooting. 1800 dollars is the price of a fully battery equipped arma truck. i think we're buying rc platforms that cost more than this printer. that's why it's in the budget. Everyone's budget is different. just like bambu offers tears. the bambu p1p is 599. and you won't have to use a 3d party slicer to make it work properly. or you won't need to invest in octoprint with a never stocking rasp pie. so no i very much disagree. you're comparing a dji camera drone to a mini whoop.
@Fueledbyfishing13
@Fueledbyfishing13 Жыл бұрын
Hahahaha cool dude!
@Will_2421
@Will_2421 Жыл бұрын
Can I buy a black one from you
@kpopRC
@kpopRC Жыл бұрын
nope.
@toddbertram6556
@toddbertram6556 Жыл бұрын
Kplop, nice
@toddbertram6556
@toddbertram6556 Жыл бұрын
Always makin cool shit brother, keep em rollin. Is that a 1/6 scale of the mini trench boats? Double the size on a single spool and that would be awesome. You could print the parts and sell them for 250-300 depending on durability, the thrasher is a beast but cost 2 arms.
@ashutoshshrivastavimuvizag1664
@ashutoshshrivastavimuvizag1664 8 ай бұрын
can i get stl file of this model ?
@kpopRC
@kpopRC 8 ай бұрын
dude. you honestly can't scroll down to the description?
@baconbulldog5250
@baconbulldog5250 Жыл бұрын
Hey can you do the kiwi jet X next it is a really nice boat it is kinda similar to the mjet sprint jet but it is bigger If you want to have a look just search up proton RC. amazing video and makes me kinda want to buy a mjet sprint jet
@kpopRC
@kpopRC Жыл бұрын
i bought the plans. i've printed it. and i've never finished the build. it's not a better boat, and it's a single impellor with no stator. way less power for volts, and no auto righting. I'll stick with Mjet!
@baconbulldog5250
@baconbulldog5250 Жыл бұрын
@@kpopRC sorry if I have offend you
@baconbulldog5250
@baconbulldog5250 Жыл бұрын
@@kpopRC But which kiwi jet was it because I thought it had self righting the kiwi jet X
@ChaosLC
@ChaosLC Жыл бұрын
THATS WAT SHE SAID--- timeline-5:53----
@nathan584
@nathan584 Жыл бұрын
Why is there a hole in the back?
@nathan584
@nathan584 Жыл бұрын
Nevermind I figured it out lol it's for self righting when it's flips over
@zacharias_b
@zacharias_b Жыл бұрын
Link to printer missing
@kpopRC
@kpopRC Жыл бұрын
links have been in the description since day one. bit.ly/3YvYatO
@youknoweverything7643
@youknoweverything7643 Жыл бұрын
I even made a benchy rc boat those test boats i made it way bigger adjussted kt so it will float stable and put moror servo and boom rc benchie
@21LOLxPRO
@21LOLxPRO Жыл бұрын
dont used glue on the bed used pey bed and crack temp on 65 and easy resolve
@kpopRC
@kpopRC Жыл бұрын
i don't ever use gluestick. only for pla which i use very rarely. i use petg on a textured print surface, with no anything except a clean with Isopropyl alcohol.
@SnowingNapalm
@SnowingNapalm Жыл бұрын
Now for dual 55 lb thrust jets and a 100W solar panel to power it probably need a battery still as an intermediary capacitor but yeah let her rip
@kpopRC
@kpopRC Жыл бұрын
A 100w solar panel can only provide 5amps at full sun. my battery can provide 100.
@SnowingNapalm
@SnowingNapalm Жыл бұрын
@@kpopRC exactly 😏 not infinite range at full power yet still a redundancy that would slowly heal the energy loss in the light or slightly reduce the wear and drain on battery
@kpopRC
@kpopRC Жыл бұрын
sounds like a great project for you snowing napalm. do it!
@1stgen406
@1stgen406 11 ай бұрын
Thought about doing this. I can buy a jet boat twice the size for half the cost. I know its about the journey. But it makes no sense. And I didn't even add the cost of plastic.
@kpopRC
@kpopRC 11 ай бұрын
not sure where your math went wrong. boat took 10 dollars of fillemet to print. electronics under 230us dollars.
@1stgen406
@1stgen406 11 ай бұрын
Yeah I can buy a complete RC boat for $200. So no my math is fine.
@kpopRC
@kpopRC 11 ай бұрын
buy cheep buy twice. enjoy the toy.
@1stgen406
@1stgen406 11 ай бұрын
Lol
@ackiemanson536
@ackiemanson536 Жыл бұрын
Amazon shopping list does not work
@Ghosty-RC
@Ghosty-RC 8 ай бұрын
check out his newest build! its a modification of this and should be for free if you bought this file! It's AWESOME²▄
@4x4-l2t
@4x4-l2t 9 ай бұрын
Why is there a big hole in the back of the boat
@kpopRC
@kpopRC 8 ай бұрын
it's a chamber that fills when upside down and flips it back over.
@Raycefan
@Raycefan Жыл бұрын
Got a link for the epoxy you used to seal it or was it the same?
@kpopRC
@kpopRC Жыл бұрын
nah the sealing is just self leveling epoxy. it doesn't give the best finish. but it's strong AF!
@kpopRC
@kpopRC Жыл бұрын
amzn.to/3Eg6vbE
@lacucaracha111111
@lacucaracha111111 Жыл бұрын
1500$ Printer.... I honestly imagined an extra 0 on that price for LIDAR and AI calibration and "spaghetti" detection. Not too bad if you look at the Voron2.4 which ends up at the same cost, without multi material feed system / drybox
@en4cer
@en4cer 6 ай бұрын
Should have done stickers then epoxy
@kpopRC
@kpopRC 5 ай бұрын
wouldn't make any difference. the hull is BANGED up. and a 3d print away from a new one.
@EdwardChew
@EdwardChew Жыл бұрын
Haha ive printed this years ago and have not assembled it yet
@kpopRC
@kpopRC Жыл бұрын
do it! for the love of god. it's so good.
@mayhemSWG
@mayhemSWG Жыл бұрын
Like the Vid: But you gotta admit the title makes no sense, and is more clickbait ngl. 1): Normal hobbyists will not have a CNC machine rivaling 3D Printer at home, or your smart Sticker maker so If i want a ProBoat Mojo at 1/3 the price I would need the Printer(s), Filament, Program and Design for a box of beer. 🍻 2): The new Hobbygrade Electronics would cost around 200-300 EUR here that in itself would be 1/3. 3): The price of the whole endeavour is roughly 2200,-EUR The ProBoat will be available in 2 yrs for 300,-EUR used. This Vid shows what can be done with a printing workshop in the backyard, it shows what crazy fun a RC jet boat can be, but for 90% of enthusiasts looking at the new ProBoat, its not a reality.
@kpopRC
@kpopRC Жыл бұрын
your math is wrong. We built these boats for 180 Canadian dollars (THAT'S 133us dollars), not counting the radio... (because as a hobbiest there is nothing worse than another RTR controller). Now quick question. does my 3d printer ONLY print jet boat hulls? I get it. you can't build things, and now you have to pay a premium for sub par mass manufactured toys, not engineered master pieces. You do what you want. but this boat is FAR better than the proboat. I can hear that single impellor cavitating from here. how about you visit the community, and you go see how people are actually building these on a budget.
@mayhemSWG
@mayhemSWG Жыл бұрын
My "maths" are not wrong Bud. I am German, I live in Germany, here the ProBoat is 618,- EUR as of writing this. And to top it off a Bamboo Labs printer that is mass stored here (Warehoused) still costs more than in the US/CAN roughly 1600,- EUR. I get *you* can build much more with your Printer and affiliation with RC brands, however I stand to the fact that 90% of RC Hobby consumers will not be able to produce this result for 1/3 the price of a new RC in Mass Production. Cheers 🍻
3D Printing a RC Boat to Cleanup the Oceans?
27:39
Drew Builds Stuff
Рет қаралды 277 М.
3D Printed Electric Hydroplane
11:04
Sam Barker
Рет қаралды 114 М.
УДИВИЛ ВСЕХ СВОИМ УХОДОМ!😳 #shorts
00:49
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 3,3 МЛН
Players push long pins through a cardboard box attempting to pop the balloon!
00:31
Чистка воды совком от денег
00:32
FD Vasya
Рет қаралды 5 МЛН
I Built the Worlds Largest E-FOIL
17:34
rctestflight
Рет қаралды 237 М.
3d Printed RC Jet Boat is way TOO FAST
14:16
Kevin Talbot
Рет қаралды 358 М.
I Made a HUGE 3D Printer - Using 3D Printing!
18:22
Alexandre Chappel
Рет қаралды 458 М.
Can You Charge A Phone with Marbles?
18:06
Engineezy
Рет қаралды 1,2 МЛН
I Wish I Knew THIS About 3D Printing 3 Years Ago
38:41
wittworks
Рет қаралды 356 М.
M-Jet 35 Release! 3D Printable Jet Pump For RC Boats
4:11
M-Jet Development
Рет қаралды 40 М.
Why I charge $55 for this 3D printed part (how to price)
11:06
Print Farm Academy
Рет қаралды 806 М.
I Hand-Picked the BEST 3D Prints
21:26
The Next Layer
Рет қаралды 329 М.
УДИВИЛ ВСЕХ СВОИМ УХОДОМ!😳 #shorts
00:49