Modern GPU's - How serious a small problem can be |

[@100timezcooler]

dude thats nuts. no other repair channel goes 10 layers into a pcb to salvage the card. props.

[@Loveliss_Tech]

@@_-Montana-_ To be fair. NorthridgeFix, according to his videos has to repair a handful of whatever comes into his shop on a daily basis. He may be able to do more in depth repairs but chooses not to in order to get repair jobs in and out very quickly. He doesn't seem to lack for jobs so he can be picky what he works on. He's said many times that doing things like this repair or reballing chips isn't efficient for him because it takes too much time.

[@Appri]

@@Loveliss_Tech Although this has gotten better lately, Alex from NF tends to be extremely arrogant and rude towards the customer. He also does some shady tactics to lure in customers, but whatever. He is also extremely skilled, so eh.

[@zeroxception]

well thats becuase its not financially viable....unless you make money fro the video itself

[@spenmac]

Kris, didnt. He only did it for a video.

[@martinkesselaar9522]

Alex only fixes shorted caps and mosfets. Must be done quickly to make lots of money. And also plugging his website to let customers buy stuff. And yes, he can be rude sometimes. That's his choice. He is skillful but not as skillful as Kris.

[@basshuntet6128]

Let's be real, this guy is very skillful. He goes deep into 12 layers of pcb, and managed to solder steadily. Plus it's free😭

[@brianpratt2432]

I realize this was about two months ago but what do you mean he did that for free! He seriously did that for free? Whoever owns that card should have sent this man a couple hundred dollars for fixing it as a tip.

[@sinancetinkaya]

@@brianpratt2432 yeah!

[@noxious89123]

@@brianpratt2432 Because he will not warranty this repair, as it is highly likely that it will crack again and fail, if the card isn't handled / installed very delicately!

[@mik310s]

Yeah this dude does some crazy repairs I wouldn't attempt this.

[@pwnmeisterage]

He explains in the video. He no longer warrantees or accepts this sort of repair because the card becomes fragile after this kind of repair, installing it without great care will just damage the card again and put it back on the repair bench again. Identifying problems and rebuilding broken traces/pads deep inside a multi-layer PCB does require skill, and a certain temper. Anyone can learn how to solder "professionally" in about a week - not everyone can do this kind of detailed repair.

[@dominic.h.3363]

I didn't even think this kind of repair was possible, much less privately. I thought any kind of repair work that would just not be feasible to perform would have no instrumentation to support such workflow. I'm glad to have seen this amazing process and I'm no less amazed by the skill it requires. I mean, this looks like it requires VERY steady hands. Amazing, all of it!

[@ChaosHusky]

It can be very difficult, especially on multilayer PCBs. There's often a way, especially with schematics, but with things like graphics cards they can be disturbed easily and break connections again! Single or dual sided is much easier, the times i've had to fix, glue and reconnect traces on abused electronics i lost count of lol

[@RashakantBhattachana]

@@RanjakarPatel yes we are more strong 2 make fix. but he try his best his branes.

[@KrisFixGermany]

@Ranjakar Patel Show me !

[@christopheroverton6188]

Without KirsFix channel, I would've never attempted, let alone repaired my own 3080ti with the same issue. This channel, and TechCemetary taught me SOOOOOO much about GPU repair. Prior to these guys, I've only been able to do SMD diagnostic and repair. After, I've fixed PCB layer issues that I never would've been able to fix, nor wanted to fix in the past.

[@Alex-tu5vu]

@@RanjakarPatel 😂🇩🇪👌

[@javierinfantechavez5755]

Your skill as a GPU Microsurgeon is truly impressive. Your work must require an immense amount of precision and expertise.

[@gsuberland]

The reason for the pads not being ripped off on these boards is probably the use of soldermask defined pad technology (annoyingly shortened to SMD!), where the soldermask aperture size is negative in relation to the pad size, so that the hole in the solder mask is actually smaller than the copper pad underneath. This leaves a "ring" of soldermask defining the shape and size of the pad, rather than the normal process where there's a small gap between the pad and the soldermask. This is typically done on BGA & CSP footprints for exactly this reason: it helps mechanically secure the small pads to the PCB, making it more resistant to lifted pads from shocks and vibration. When there's damage it typically breaks the chip rather than the board, making repair possible. The downside is that it's harder to manufacture, which makes it more expensive, but in cases where the board is going to be (mis)handled a lot it makes sense to use this technology. Phones, for example, use it pretty much everywhere.

[@81formann]

Ahh... Interesting info there. Thank you. nVidia should adopt this process immediately. It would give Huang an excuse to raise prices a bit more. Or we could start securing the GFX to the case, and then mount the motherboard onto the GFX.

[@ProcrastinationHyperfocus]

That's genius. It's also something I can start doing at home with DIY etched boards and UV-cure solder... at least, I can start *trying* to intentionally do that :D

[@pf100andahalf]

@@81formann Jensen doesn't need an excuse to raise prices. He just does it.

[@ArtisChronicles]

​@@81formann I like the idea of securing the card to the case somewhere to avoid these types of damages. Riser cables could come with cases or motherboards this way.

[@mbwatson1000]

So, you don't only have amazing repair skills, but also a caring heart. Thank you on behalf of this customer and all of us for doing this repair. As you rightly say, it is impossible to warranty this type of repair. Obviously, you cannot run a business without getting paid for your work. So, I have made a small donation to your channel, and encourage others to do the same. Together, we can aid Kris-fix to repair some cards of this type without being out of pocket.

[@PrefoX]

its to make money, hes a nice guy but it makes money. he wouldn't do it without the video

[@iikatinggangsengii2471]

i like the logic happening here

[@FATPunisher]

I am an electrical engineer, I understand what you are doing, and you are a magician. That is insane! I thought I had some basic soldering skills myself (0.5mm Pitch SMD, bottom side Thermal Pads, all at home with cheapest equipment), but that is a level I would've thought impossible. You have my greatest respect!

[@VndNvwYvvSvv]

Can you do CPU pins too? That's tough. I can do outer or inner edges. I don't even bother with those in the middle of an area unless I can create a corridor be removing one on an edge

[@DooMMasteR]

Thanks!

[@tektonike]

I am surprised that you only have 18k subscribers. You explain everything in great detail, you explain it so everyone can understand. The quality of the videos is great.

[@raresamarandei7527]

just a matter of time my friend, just a matter of time. From 10k to 100k takes longer than from 100k to 1M. In 2 years it will exceed 1M subscribers. Give it a little time.

[@kibabyte]

Unbezahlbares Talent und der Mann macht es trotzdem gratis. Bravo!

[@chakflying1]

This is like fixing a racing horse with broken leg. Insane work.

[@dylanevans5644]

Just sat here shaking my head in disbelief at the skill level here. You should have been a surgeon my man.

[@benjaminchung991]

One thought as to why the AMD boards might have stronger pad adhesion vs. the Nvidia ones is that AMD might be using BGA footprints that overlap the soldermask over the copper layer a bit. Overlapping the soldermask is apparently a common technique in smartphones to improve the mechanical strength of the BGA connection by using the soldermask to retain the copper. I think that you can see them doing this at 15:00. (edit: I looked at your most recent Asus 4090 video and it doesn't look like Nvidia is overlapping the soldermask on top of the BGA land, so this is probably a reasonable hypothesis as to what's retaining AMD pads better.)

[@PrefoX]

you are right. and the comparison is not fair, Nvidias Ref boards the best of all. what gigabyte asus msi etc. do is on their own, AMD is not producing them at all. Nvidia has more advanved PCB which are necessary for the GDDR6x VRAM. he maybe don't know that but the conclusion was wrong.

[@benjaminchung991]

@@PrefoX Well, this trick with the soldermask doesn't really affect the SI of the signal - you can absolutely still do it while still hitting the targets for GDDR6X and higher. It doesn't even change the cost of the PCB any - it's just a little attention to detail thing when doing footprint design that can improve durability.

[@ziaddassoum]

That is called Robotic Surgery :) Precision, experience and unmatched skils. Kris, you re so brilliant. Keep on !!

[@soulcatcher668]

This video should be on every builders watch list. GPU's are so big and chunky these days, it gives a false sense of indestructability. Great video.

[@jasonriddell]

I have seen a LOT of warranty reject cards on fleebay with this EXACT damage "factory" service centers wont perform this level and crack = garbage

[@Sharpless2]

@@jasonriddell Well yeah, because this is A LOT of work to fix a single card. A lot of work is a lot of time, and a lot of time spent working on a single card is a lot of wasted money. This level of repair can easily far exceed the worth of the card itself.

[@lc3853]

@@Sharpless2 Well, first I'm going to set up a "dental technician fantasy bootcamp" to do all the grinding and gluing. Step 2, profit.

[@ArtisChronicles]

I'm sure the added mass actually increases the rate of damage as opposed to decreases it.

[@aaaronmiller100]

unreal. absolutely amazing. you're a freakin wizard.

[@st3althyone]

It's incredible what you can do with these repairs, Kris. I've been watching your channel for a while now, and I’m glad I found you. Your repairs are always thorough and exacting a consummate professional. I wish you the happiest holidays and the best in the coming year. Take care, and we’ll see you at the next repair.

[@kleinfeicht]

The most disgusting thing is that a lot have far to few slot blends they use … totally rip off If you told me 10 years ago where we build into cases 500 watt gpus that weight around 10kilo on 2-3 slots i would laughed and said stop joking … they need to make better designs way more structure

[@dungufed349]

Thank you Theodor, this expertise is just insane. I try to do small repair work on simple devices, which are much bigger in comparison to graphics cards, and even then I struggle with small sized elements and soldering very delicately. Keep up the amazing work

[@Snoopmasta]

Absolutely mesmerizing camera work there!

[@mmz12]

Beautiful work. I enjoy watching others in the same industry. Get the job done with a chill vibe. Cant beat that.

[@rawbowke]

Amazing to watch ... I can't even hold a cup of coffee without spilling. Incredible.

[@jeffrey308]

This type of repair is truly an art. I respect it very much.

[@bcoronga]

Mein Gott!! What a skill, knowledge and set of tools, incredible work! Cheers from a hobbyist in GPU repair in Brazil!

[@ali2naveed]

i had been a mobile repairer, had to do some nasty jobs like this, but the level you go deep into the thing is just amazing, i never thought of going through 2nd or 3rd layer, gosh you have blown my mind totally.

[@RNG-999]

15:05 AMD GPUs cost on average $150 more to manufacture than Nvidia GPUs. That is most likely why you see higher quality PCBs for the AMD variants vs Nvidia. Nvidia makes them dirt-cheap and sells them for inflated prices. AMD makes them quality and sells them for what they are worth. Take an RTX 3090. PCB cost $350. Sells for $1599. RX 6900 XT costs $450 to create, sells for $999. AMD makes much less profit per GPU. This also means less of a profit margin, like 3% instead of 5% for AIBs selling Nvidia GPUs.

[@the_Scarlet_one]

Your channel is an absolute pleasure to watch. Thank you for sharing your artwork and skill with us.

[@Borrie131]

Next level of repair! Northbridge fix and Louis Rossman take note!

[@81formann]

You sir, are certainly raising the bar in regards to repair videos. Quite frankly you are putting the vast majority of them to shame. The level of persistence and professionalism is admirable.

[@hawkbird6294]

awesome video, very nice work! i also quite liked the song you played at around 16:00, it reminded me of one of my favorites you might like thats very similar "Immanuel - Tony Anderson"

[@stephenhood2948]

Wow!! That is easily the most impressive GPU repair I have saw!!! Nice job!! I would have assumed that was an unrepairable board. Very nice!!!

[@arashgharibi7580]

I'm Iranian, and i am in iran. Our internet is down, and we connect hardly to the internet by vpn. I'm very happy to find your channel. I enjoy watching all your videos. Plz upload more videos. 🙏

[@Loveliss_Tech]

That's some crazy skill right there. Grinding all those layers, fixing deep broken traces and the card works! Mad props!!

[@ScottAshmead]

This is some really fascinating stuff..... happy holidays

[@martink3153]

Wow, ich hätte es niemals für möglich gehalten, dass man wirklich handwerklich an solchen Platinen arbeiten kann. Allergrößten Respekt dafür. Sehr beeindruckend anzuschauen.

[@PanosPitsi]

I am an electronic engineer and I’m mind mind blown

[@dadrising6464]

Absolut irre. Er wär sichet auch ein guter Chirurg geworden. Ebenso fasziniert hat mich aber die Workstation..

[@3333927]

Mit dem richtigen Werkzeug geht fast alles. Diese ganz kleinen SMDs habe ich bereits öfters schon als Jugendlicher gelötet - einmal einen damals sehr teuren 1GB DDR Ram, und ebenso meine 9800 GTX. Funktionieren bis heute noch. ;-)

[@Maksimov1337]

Holy moly! Невероятни умения и търпение. Благодаря за обяснението и т.н. Иска ми се да знаех и 1/3 от нещата които сте забравил за електроника!

[@StephanHL27]

Ich muss ehrlich sagen, krasse Arbeit. Ich kann zwar auch elektronik reparieren, aber nicht auf so einem Level wie du, hätte gar nicht die Geduld dazu und das können.

[@DaBeNnY]

Ich komme über "DerBauer" und dessen defekte Karte zu dir und finde es einfach nur beeindruckend welche Skills du in diesem Bereich hast. Ist einfach interessant zum zuschauen. :)

[@DesOdinsNordman]

Hallo KrisFix und fröhliche Weihnachten :) Deine Arbeit ist unglaublich und wir wissen sie immer wieder aufs neue zu schätzen. Was Du leistest ist einfach Klasse. Beste Grüße und Danke für Deine Arbeit und die tollen Videos :)

[@agentkruger]

Merci pour toutes tes vidéos et joyeux noël🎅 et Bonne année 2023

[@opiniononion919]

Das ist komplett krank. Ich bin selbst ziemlich "hands on" was IT Probleme angeht aber so eine Reparatur würde ich mir nicht mal in meinen wildesten Träumen vorstellen. Und wenn mich jemand danach fragt, hätte ich immer gesagt "sorry Kolleg da hast du leider verloren, keine Chance." Die Frage ist aber, was hätte diese Reparatur gekostet? Das müssen doch safe mindestens ein paar hundert Euro sein.

[@nickv6568]

You are a gpu repair magician . Incredible work

[@haxxorsheep]

Next level repair. You got a new sub

[@siliconalleyelectronics187]

Great work as always. I'm sure the reason they tend to fail after these types of repairs is because the crack still exists in the board, so it's structurally compromised. Any stress will go straight back to the repair area first. Solder mask isn't very strong stuff when compared to layered fiberglass and the mask doesn't get into the crack. Using a low viscosity epoxy resin with the assistance of a vacuum chamber would help in getting a strong material into the crack and restore some structural integrity. Normally this wouldn't be worthwhile however these types of failures have become so common, and the trend of big heavy coolers doesn't seem to be going away.

[@MrMudtit]

Incredible. You're either a magician or a surgeon (or both lol). Happy holidays.

[@ApocDevTeam]

Just curious, if a PCB is beyond repairability, would it be possible to just wait for another card to come by with a dead core, and then switch the cores on both cards so you end up with one working card? Or can you not mix and match cores between different vendors. For example putting a working core of a ASUS 6900XT onto the PCB of an XFX 6900XT. Would be a nice Frankstein card if that works. It would feel like a waste if a card is thrown away because only the PCB is broken. The core is most valuable I would say, especially on modern card.

[@jasonriddell]

that is what I was thinking and "revive" a dead core card with this being the "donor" I expect the core to be the same for every "AIB" as long as it is the same class of card IE 6900 and NOT 6950 OR LHR/NON LHR 3080 cards

[@noureddine7805]

thanks to der8auer i discovered your channel, now i can't wait to watch every repair you do, because of you i learned so much about traces, reballing, and generally how to fix a graphics card. thank you kris, thank you der8auer

[@pauld.9856]

Did I really just see someone repair a 12 layer PCB with multiple cracks? 😮Anyone who has done something similar as a profession must be either ashamed or in awe of the repair. It's best to rename your company to JEDI-Repairs, that best conveys your skill. 😄 And you did it for free too, hopefully the customer appreciates it appropriately. I'm looking forward to many more interesting videos. 👍

[@svenhoff2653]

Hut ab! Bin selber nicht ganz unbedarft was feinarbeiten mit nem Grinder und Lötkolben/Heißluft angeht. Aber das war schon heftig. Aber ohne mechanische verstärkung (Fieberglasmatte, Epoxy) der Platine an der Bruchstelle habe ich wenig hoffnung ,das die klasse reparatur lange halten wird. Es sei denn, die Karte wird (wie schon gesagt) vertikal verbaut und gut gesichert.

[@elrosahir2588]

Was eine Arbeit, natürlich kann man alles reparieren aber das ist schon nicht ohne gewesen. Frohe Weihnachten und guten Rutsch!:)

[@KrisFixGermany]

guten Rutsch :)

[@Chinosandman2]

Amazing skills!!! Awesome.

[@Turnkey_BM]

Killin it man. I had no idea things like this were possible.

[@jonathanharry475]

Very cool! thanks for the upload

[@ritzh2908]

Deine Arbeit belohnt dich mit dem Erfolg und zu wissen was man machen kann. Auch wenn das heutige Gewährleistungs system sowas fast nicht zulässt. Sehr befriedigend zu zu sehen. Du bist der beste Theodor. Ein frohes neues Jahr und merry chrismas.

[@manzarelahi1812]

I got to this channel from DerBauer, I never thought I would find this stuff that interesting but here we are! It's very interesting as a Software Engineering major who has to do classes dealing with electrical engineering and the like. Very cool to see these high level repairs!

[@jasonriddell]

I came here because of DerBauer and am a "fan" of Louis Rossmans MAC repair videos but this is NEXT LEVEL repairs

[@projectartichoke]

Amazing repair! You really went the extra mile on this one. Burrowing into a 10 layer board is well beyond what I can do, and it's a testament to an amazing level of skill and patience.

[@martinmalone6324]

Wow amazing fix, patience of a saint, and the skill like none I've seen on youtube, congrats and happy new year.

[@HuverUber]

This is just insane, thats truly a special skill and a lost art. Almost nobody can do such repairs in todays world. Great work!

[@Steamrick]

Lost art? It was never an art. So many layers on a PCB is very much a modern tech thing.

[@HuverUber]

@@Steamrick my statement was based on the fact, that he could repair such damage, that is lost art. Not the multilayered pcb.

[@Alban-k9r]

Amazing job, your videos are insanes

[@ibeebzz9804]

Very impressive repair! I would not have thought it would be possible to repair that kind of damage

[@-FOXX]

Well. Let's get you paid. ;) Absolutely insane skills. Very nice!

[@kylearendse1129]

My mind is blown 😮😮 thats some next level repair skills !!!!

[@tinojsachintha7885]

Are you for real bro? How on earth is this kind of a repair even possible. If anyone can't be positive after seeing a video like this, what will make them positive. NOTHING!! Your work is next level dude. It's like superhuman work.

[@Federale570]

Kris, what would likely cause damage to the memory modules like this? The physical bending of the card seperating the memory chip and the PCB causing electrical shorts?

[@slowtrigger]

Maybe a bad technician tired to repair the card before Cris?

[@siliconalleyelectronics187]

The same force that damaged the slot and bent the PCB would rip pads from the memory modules. This is why some manufacturers started using underfill on the memory chips closest to the slot, moving memory chips away from the slot area, and moving all BGA components in general away from the slot area.

[@Federale570]

@@siliconalleyelectronics187 thanks for the comment, good info.

[@Zindoviev]

Magician man! Really impressive work!

[@Numfuddle]

It’s quite common to sandwich data lines between ground plane layers to make them less susceptible to electromagnetic interference (ground acts as an EMI shield) which probably makes grinding even harder if you need to go deep into an eight or twelve layer PCB I suppose

[@VndNvwYvvSvv]

That's not at all how it works. It's about coupling, not shielding. If you go down the path of PCB design thinking it's shielded, you will create massive problems that other people will get paid well to fix. 😏

[@dazley8021]

I'm glad I always picked cases where they turn the MB tray so that GPUs are mounted vertically. With how heavy cards got over the last few years, mounting them horizontally just asks for problems. :D

[@mberring1]

What cases are you referring to, if I may ask? I'm only aware of the Dark flash v22 case, are there others?

[@dazley8021]

@@mberring1 Some SIlverstone cases have that configuration and my gaming case is the Thermaltake Tower 900, also vertical configuration ;) The ridiculous thing is, I have a RTX4090 gaming OC from gigabyte and despite the huge Tt case, it barely cleared the middle section with the HDD cage and fan ontop.

[@_MJ07_]

Correct me if I'm wrong, but did that machine placing the ram ic show you both the PCB and the ram pads so you could align them for correct placement? If so, that's incredible!!!

[@barevids]

yeah it did! Im so jealous lol!

[@custume]

great video, nice repair

[@TomatePasFraiche]

Kris, thank you for being transparent and showing us how possible those repairs are, you are the man!

[@arcadestuff]

Watching you repair these is hypnotic! Excellent work, amazing skills and thankyou for sharing these repair videos. I really enjoy watchign them!

[@Gangster89x]

i would love to see at the end of the video what it coast. By my self, i have the ''Inno3D Geforce RTX 2080 TI ichill Black'' and i send it 3 times to Inno3D, they replace the cooler, but the main problem is still there. Its cool at 55c on idle but its not the cooler, its the card for sure. You can start and run pc till the desktop but if you start something it shut down immediately, the temperature goes instantly over the 90c and it turns off, i also had random pixels all over the screen, glitches and i dont know all the names of this issues. The card has no longer guaranteed and nothing else, but Inno3D try to help anyway - im really thankfull for that. Now its way more over a half year without gaming for me.. i really hope you can help me. Thank you and Inno3D for your support and help! By the way, it was Inno3D, they told me about you, so here i am. Im from germany too, but i leave this comment in english. (sorry for my bad english) I really hope so much for help. I saw few videos of you and i really enjoy it too see how you repair. Greetings, Lukas

[@spenmac]

Kudos @Kris, it never hurts to remind people/public what a pro repair looks like.

[@Digikidthevoiceofreason]

What’s going on with bauers 4090? THAT is the video we want to see.

[@KrisFixGermany]

He will make a video about it

[@mikeguy1899]

its mind blowing how precise your work is. its hard to visualise how small your work area is through that microscope and yet you make it look like you are just reconnecting normal pcb traces. its easy to forget you are soldering microscopic data lines on a high end gpu 5 pcb layers deep. very impressive

[@shannonfamily]

Very lucky on those RAM chips, I thought for sure some pads would be MIA. Nice work. There does have to be a line you draw, unless money isn't an issue for the person but then if it weren't they'd probably just grab a new card. I think this is close to that line because the cost of this repair had to pretty high.

[@Dandan-tg6tj]

It's not only this but imagine you do all the work perfectly and at the end of all that perfectly done work, the card still isn't working properly.

[@goku445]

Most shops won't attempt repairs like this. Not worth the time. High risk little reward.

[@HWMonster]

Unfassbar! Der absolute Hammer, deine Reparaturen zu verfolgen. Schon sehr viel auf diesem Channel gelernt und weiterhin sehr interessiert am Thema. Danke für's Teilen 👍

[@scambio_termico]

Hi, I'm writing from Italy ... the work you do is incredible 🤩 ... I honestly didn't think it was possible to repair sophisticated components such as video cards ... I recently bought a zotac rtx 3080ti which was used to mine and if I need a repair in the future, I will certainly contact you 👍👋

[@Trught]

True art of repairs. Thank for video.

[@goodtimeschan]

I follow many different repair channels and I must say this was hands down the most amazing repair I've ever seen; to go that far and manage to save the card was truly astonishing, bravo. You got yourself a new subscriber.

[@lutherkaine4279]

Outstanding work. It is a joy watching you repair all those cards!!!

[@GiGaSzS]

Amazing repair that requires a lot of precise patient work! And it is amazing how manufacturers are routing so many traces at the edge of fragile PCB part (even under the screw pressure points) :/

[@TheDoomerBlox]

Amazing, yes. You might even say - amazingly curious. :- )

[@derekchan1570]

If traces are in pairs, they are most likely differential pairs. Removing a layer of copper will greatly change the impedance of those signals, affecting signal integrity. Signals bouncing back and forth would cause more issues.

[@Mueller3D]

Fortunately, the copper is removed for only a few millimeters.

[@intentionally_obscure]

Incredible. I did not believe work like this was physically possible. I had some idea how complex modern GPUs were but seeing you go through the layers under a microscope was something else entirely. This is more than extreme proficiency with the tools and workpiece, this is artisan craftsmanship.

[@aoshiroyami4458]

dude..... no words, first time ever seing such repair. 99% other people wouldve just send to junk. BIG THUMBS UP!!!!!!!!!!!!!!!!!!!!!!!!!!

[@m4rsianer]

Do you use some drugs to hold your hand that steady? Looks more complicated like an operation on the heart. ❤️👌

[@stanimir4197]

Neurosurgeon steady hands, indeed... Some people just have them - easy to lose them as well.

[@MichelleBre1]

I am full of deepest admiration for people like you who can fix something like that!

[@martinsevcech2504]

This repair is pure magic, very nice work.

[@bezbeli]

Dude, what big nerves you have! Gut gut

[@jampackedfun1995]

This is absolutely stellar. Amazing video. No nonsense, straight to the point and excellent workmanship.

[@Robert.Czarnik]

"Hat from a head". This is nice to watch. Especially with that music in the background. Great job! 10/10 points from me for taking and successfully accomplishing this challenge.

[@SmileyFace01]

Amazing work man.

[@neodroid2000]

That's one hell of a repair. Never seen anything like it. Very good content keep up the excellent work!

[@Jason_Bradley]

Amazing work! Great videos! To the point, clear, detailed, and masterful expertise. 10/10 channel

[@kaddasixseven3581]

crazy impressive work. Like a dentist.

[@PhalanxLP]

Wie immer ein super Video @KrisFix-Germany. Krass zu sehen was für Schäden an Grafikkarten tatsächlich zu reparieren sind, wenn man die nötigen Geräte, das KnowHow und vor allem die Skills hat, sowas abzuliefern! Sehr, sehr beeindruckend, wirklich. Und Du musst Dich denke ich nicht bei den Zuschauern bedanken. wir bedanken Uns bei Dir für solchen hochwertigen und professionellen Content! Ich wünsche Dir einen Guten Rutsch ins neue Jahr, alles Gute und bleib gesund 👍🏻🙏🏻

[@ricma9710]

Hi Theodore. You did a great thing for this customer especially considering it's Christmas. This will be a great present for him.

[@johnm1047]

VERY INTERESTING. Thank you. Repadding as well as repadding the pcb side. That would’ve been another level of obstacle to see. I’ll have to check out more of your channel. Thank you again for posting this.

[@elgranelectron5387]

You are the best Kris, thank you for teaching us so much stuff. Happy new year from Argentina!

[@Sirmellowman]

the level of skill displayed in this video is mind blowing. you are truly amazing at what you do.

[@Jim_M_75]

That's the most crazy repair I've seen on KZbin. Me "that's cracked right through, you can't repair that"... Wrong. Me "Loads of pads ripped off the card under the ram, it's junk"... Wrong. You blew my mind with that fix mate, all done in really nice English so a simple one language Brit can understand, superb. Subbed, thanks for the upload.