KRUPS XP442С11 VIRTUOSO Home Espresso Machine - Latte Macchiato

[@WelcometoAngiesKitchen]

hi! how do you clean this machine? thank you :)

[@fatimatahir8934]

Hey Can you please guide how to change the espresso volume in each shot? I tried the method in the instructions manual but didn’t understand it..

[@homespresso]

Hey, all you need to do is not just hit curtain button (one cup or two) while making espresso but keep it for 3 seconds and then hit it again stopping process. Time between two hits will be your new volume of espresso on these button.

[@kagomeotilia]

The steam won't come out of the wand. It comes out from the place above where the coffee capsule goes. I tried placing the wand in hot water, then trying to unclog the tip with a needle. What else can I do? Thank you very much in advance!!

[@homespresso]

Try descaling the machine manuals.plus/krups/xp442-pump-espresso-virtuoso-manual#descaling

[@jordanbelfort5393]

Gibt es für die Maschine auch einen passenden bodenlosen Siebträger?

[@homespresso]

vielleicht, aber noch nie gesehen

[@user-cw1mt6is5v]

Здравствуйте. У меня в рожке, после, как выйдет кофе, остается сильно мокрый порошок кофейный. Какая причина. Не могу понять.

[@homespresso]

Добрый день. Это признак слишком плотной таблетки. Такое может быть из-за одного или совокупности факторов: слишком мелкий помол и/или слишком сильно трамбуете и/или слишком много кофе в рожке. Попробуйте что-то изменить.

[@user-cw1mt6is5v]

@@homespresso Спасибо большое. Я учту Ваши рекомендации.

[@eldarich]

Не подскажите какой размер темпера выбрать, спасибо.

[@homespresso]

51.0 mm

[@MeseretZemedkun]

Hello, Can we use this matchine for commercial use ? please reply

[@homespresso]

Hello, don`t think so. Maybe like reserve

[@chamyto160]

I'm not able to make stif textured milk, it collapse instantly

[@homespresso]

maybe milk too fresh or technik incorrect or both, try to use pasterise milk and keep steamer on the milk surface during steaming

[@kagomeotilia]

Wie mache ich einen Kaffee, der nicht wässrig ist? Ich habe versucht, die Kaffeemenge anzupassen. Egal welche Einstellung ich verwendet habe, es ist immer noch wattig. Ich suchte, wie ich den Kaffee laden sollte. Gleichmäßig. Welchen Kaffee empfehlt ihr? Vielen Dank im Voraus! Ich bin sicher, das ist eine gute Maschine und ich bin derjenige, der sie nicht benutzen kann. Freundliche Grüße!

[@homespresso]

Es ist schwer zu sagen, aber wenn es wässrig ist, würde ich empfehlen, Kaffee mit einem feineren Mahlgrad zu nehmen oder stärker zu drücken oder beides. Übersetzt von Google, also entschuldige ich mich

[@kagomeotilia]

Thank you very much! I changed to a coffee which isn't that grinded!

[@HansPeter-gz3of]

Wie viel Millimeter hat dein Holz-Tamper?

[@homespresso]

@@HansPeter-gz3of 51.0

[@adrenalin7418]

какие у вас впечатления от этой кофеварки? стоит брать?

[@homespresso]

если нужна рожковая для дома, то стоит

[@adrenalin7418]

@@homespresso спасибо)

[@gabrielreinfalke2277]

Was für ne Milch nutzt du?

[@homespresso]

Es ist am besten, ultra-pasteurisiert zu verwenden

[@gabrielreinfalke2277]

@@homespresso Bei mir blubbert die Milch nur heiß auf :( Hast du die Dampfdüse festhochgedrückt oder in einer besonderen Stellung?

[@homespresso]

@@gabrielreinfalke2277 • Gießen Sie Milch in das Glas (oder ähnliches zum Aufschäumen) etwa die Hälfte des Volumens des Glases • Schalten Sie die Kaffeemaschine für die Dampfheizung ein • Nachdem Sie die Kaffeemaschine aufgeheizt haben, senken Sie den Dampfgarer ein wenig in die Milch und schalten Sie den Dampf ein • Halten Sie den Dampfgarer leicht in die Milch eingetaucht, so dass sich Schaum bildet, aber keine zu großen Blasen entstehen • Wenn der Dampfeinsatz richtig in der Milch positioniert ist - die Milch beginnt zu wachsen, versuchen Sie, den Dampfeinsatz relativ zur Milch in der gleichen Position zu halten, indem Sie den Behälter allmählich absenken • Kontrollieren Sie die Temperatur der Milch von Hand - sie darf nicht anbrennen • Wenn die Milch nicht warm genug zu sein scheint - können Sie den Dampfgarer unten in die Milch absenken und erhitzen Nach etwas Übung können Sie Ihren eigenen Latte Macchiato genießen.

[@carlt9265]

Why is my wand shooting water out and not steam i dont understand ? Its brand new

[@carlt9265]

My mistake your suppose to wait till the button turns to white 🙈🙈🙈

[@carlt9265]

One problem i see is after i use the throther the espresso buttons wont go back to white unless i turn the on and off button 🤷‍♂️

[@chamyto160]

I open the wand before using it, letting the water come out.

[@chamyto160]

@@carlt9265 there's some steam on the wand, open it and you should be able to use the extraction buttons

[@ukaszrachanski6289]

Widzę ten sam problem co i u mnie 🤨 Nie ma to jak przechylać cały ekspres, żeby wyciągnąć kubek ze spienionym mlekiem spod dyszy 😤. Oj nie przyłożyłeś się w tej kwestii panie producencie 😠

[@vjmacc]

I really dislike the fact that there's so little space between the coffee pipe and the base. You need to remove the drip tray in order to fit larger cups and then the coffee leftover drips will obviously drip off the machine. Why not just leave more vertical space? Ridiculous.

[@YGV.XXWW2024N]

It is an espresso coffee maker, the height is appropriate for espresso cups, that helps the coffee cream not be affected, because if there is more space the extraction is not the same.

[@WelcometoAngiesKitchen]

hi! how do you clean this machine? thank you :)

[@homespresso]

do you mean descaling? never do it properly actually

[@homespresso]

that what manual says about it

[@homespresso]

The machine can be descaled at any time, even if the descaling light is not on. However, the coffee machine auto counts the use cycles and gives the alert when the machine must be descaled : when the 1 cup espresso button white light and orange light flash in turn and the 2 cups espresso button white light is lit, the machine needs to be descaled. 1. Prepare the descaler in accordance with the manufacturer’s instructions, add to the water tank and fill with approx. 750 ml drinking water (2). Place the tank in the machine (3). 2. Place a receptacle with a capacity of at least 1 litre underneath the spouts. 3. Insert the filter holder without filter. 4. Press 1 cup and 2 cup espresso buttons at the same time for 3 seconds to go to auto descaling program. white light and white light flash in turn. Release the buttons, machine will go to descaling status automatically. The water pump will work for 10 seconds and then stop for 120 seconds. This cycle will repeat until the water tank is empty. 5. Once descaling finishes, 2 espresso buttons white light will stay lit. 6. Pour drinking water in the tank and rinse the whole water flowing system (without using coffee, repeat making coffee steps, making hot water and steaming). Water tank : Rinse the inside of the tank regularly. When a fine white layer appears in the tank, descale the appliance (refer to the section on descaling). Drip tray : Clean the drip tray (I) and its grid (H) using water and a little mild detergent (30-31). Rinse and dry. Filter holder, filters : Using a damp cloth, clean the filter holder mount regularly in order to remove possible coffee residues stuck to the surface. In order to prolong the useful life of the watertight seal on the brewing head, do not put the filter holder back in place if the coffee machine is not to be used for extended periods. To remove any deposits that could block the flow of your 1 or 2 cup filter, you may use the needle. Steam nozzle : To prevent milk from drying inside the nozzle, please clean it after each use. To do this, follow the steps for foaming the milk, replacing 100 ml of milk with 60 ml of water. After turning off the steam, quickly and carefully clean the steam nozzle using a damp sponge (in order to remove any residue). Pull the tube of the steam nozzle downwards. Carefully clean the steam nozzle with lukewarm water (28) (29). Fit the tube back onto the steam nozzle. IMPORTANT! After descaling, rinse 2-3 times using clean water (no coffee), as described in the “FIRST USE” paragraph. Do not forget to rinse the nozzle. The appliance is now descaled and ready for use again. No repairs on the coffee machine will be covered by the guarantee in case of: -no descaling carried out, -limescale build-up, -accessories cleaned in a dishwasher.

[@homespresso]

by the way I use osmatic water, so scal no big deal. And machine asks about descaling not because problem actually, but some volume of cups were made

[@WelcometoAngiesKitchen]

thank you so much, i really appreciate your quick response 🙏🏻 all the best!