Azzy's Design Works Shift Linkage

Important note: jam nut goes on the lower link to quickly adjust height before setting down with main nut, not the upper link, we apologize for any confusion
Does your shift linkage bind up? Or pop out of place when you don't want it to?
Well here is the solution! The Azzy's Design Works Shift Linkage!
Super easy 30-40min install, and your shifter will select through the gears like butter!
Check out their site: azzysdesignworks.com and get yours today!
Don't forget your parts at ksuspension.com as well to pair with this awesome product for your offroad/onroad needs!
Happy Trails!

[@Azzysdesignworks]

10:22 5 Speed guys, that's so you can angle the plate forward a hair, give you 1" extra room for the rod ends and turnbuckle. Some 5 speed XJs use the same lever hardware as a TJ. TJ guys, we have a different kit for you as well.

[@Azzysdesignworks]

We just did up a video today to help those having trouble - kzbin.info/www/bejne/pZWZZZifeJyLqas

[@jorgenoneya5382]

Do you have a kit for a 6 speed TJ?

[@suttonfelix2681]

Sorry to be off topic but does anyone know of a method to get back into an instagram account? I was stupid lost the password. I appreciate any tips you can give me.

[@bobgourlie4065]

I just bought one today can't wait to see it installed on my 88 AMC XJ ,😊

[@mattlinton1456]

I just searched how to install this and couldn't find a good video... Then I got a KZbin notification you posted this... Weird, and thanks

[@tjmpmstr1472]

That was the smoothest install ive witnessed....my kit will be arriving next week....i cant wait!!!

[@adamperry5693]

Went looking for written instructions and found this easy to understand video instead- thanks

[@nickdaddyd2578]

About a week ago stock gearing linkage broke while on a trial. Hopped on google that night seen this video and found Azzy’s part thru amazon. Just finished my install and I made sure to rewatch this video before I started, helped a lot damn near spot, thanks! Shifting smooth as butter now!

[@TheNickbrogie]

Thanks again Raffi! Just did this and man its a night and day difference

[@wendelldement3240]

@azzysdesignworks I pulled the trigger on your product based off this video and the channel...was looking at a couple of other designs. Thanks ksuspension for posting this.

[@phantomshtter]

For anyone with an '01 XJ: Mine needed to use the top mounting hole on the t case shifter tab. Instructions call it part B and say "most applications use the center hole". There wasn't room to get the lock nut on with the middle hole setting and the indicators on the bezel weren't lining up correctly. The top mounting hole nailed everything on the nose.👍🏼

[@christopherduby5330]

No you can use the middle it's just difficult

[@christopherduby5330]

It just takes about a 1/2 an hour of tedious finger work lol

[@motoxman568]

@@christopherduby5330 I used the middle hole on my 01 xj and it doesn't allow it to go into 4low, and when it's set ao it does go into 4 low, it doesnt cone out if part time4wd to go back into 2hi

[@jeremewaters8013]

Great video..I'm working on my linkage right now and definitely ordering this. Thanks..keep on making videos..very helpful

[@Steeda04SVT]

That’s funny I made a comment earlier today on your Instagram about a video about this product. Great video sir. Btw Love them Milwaukee tools!! 🇺🇸

[@Lugnut-uv7ff]

Sweet, simple, clean, straight to the point videos👍 Gonna buy one right now lol

[@offroad8163]

Well azzy, I just installed your linkage, I have a 5 speed in my 4 door xj sport, I will be straight up , this absolutely ridiculously well built and 100 percent built a bad ass product, if u take the time to adjust this kit correctly and set your shifter lever correctly on the money, its flawless , I even have a 1 inch drop on my xj installed first today and then set the linkage up but I did all the hard part while the crossmember was off , absolutely great product works amazing. I recommend this kit to anyone who owns an xj.. ps . Again it takes time to tweak and tighten everything, works flawless...👍👌

[@lowbornfabrication]

Great video! Plan on buying the Viper coil swap from you guys this month!

[@bobstewart7106]

Thank you for helping me prove my mechanic wrong..... Great video

[@NOSJNKY-yu4jz]

Can't wait to order this kit, mine has been binding up ever since I put my lift on it.

[@michaelgettings5377]

Followed step by step and it was easy and now I have 4h AND 4l!!!!

[@dalebrooks4444]

This linkage just came in haven't installed it yet thank you for the video

[@jstans01]

I just got mine in my hands! Waiting for some warmth to tackle this

[@jordanwurz1024]

just got my azzy’s linkeage today great job on the video

[@escozx2]

I have the older version with the single tab, works great!!!

[@TossinDirt]

ThankU 4 the video. This is a MUST mod 4 me now. Again, nice video. 👍

[@UnoThoseTrays]

Just got mine in thanks to you great video man!

[@UnoThoseTrays]

4x4 still doesn’t work but now it shifts finally lol

[@markhammer4435]

I just received mine can not wait to get this installed over the weekend. Not sure how the N242 extension work but I'm sure i will work it out

[@richarddow69]

Hey, great DIY video! I have my A shift kit in my shed with my K 12 hole injectors and my K wire set waiting for warm dry weather! With another 2k of mods. HA Big time Jeep maddnes infection. Ugh. 🤙🏻

[@spinachchin3452]

XJ madness?

[@waggy401]

Finally got one of these. I rebuilt my stock linkage years ago, but it's getting hard to shift again. Thanks for the video, Raffi!

[@arnoldbilibok7203]

Then , what was the problem ?

[@gospelhopechurch2579]

@@arnoldbilibok7203 The problem was the bushings for the shift linkages were wearing out, and things weren't lining up anymore. It was getting really hard to shift into and out of 4wd. This linkage fixed the problem.

[@PeteJacksonPapasVlogs]

My factory linkage took a giant dump tonight while I was out at the beach. Time for upgrades!

[@TRUNORCALTRAILRIDDER]

Just ordered one for my 98 xj . hopefully itll stay in 4wheel drive now haha👍

[@mrkultra1655]

Right on, thanks

[@edwardbanegas2153]

Got mine all hooked up but I can't get it to shift past 4 high. When the liver is in 2 wheel drive, the piece that we put on the transfer case is toward the back. Not sure what it could be

[@williamdomey7584]

I just had the Azzy’s design installed on my 2000 XJ. Is the 4 wheel drive light supposed to come on?

[@b52gamer89]

How did you get bolt off so easy with out the transfer case shifting

[@arturomedrano3606]

I got my today nice video A+

[@jimedward8908]

Nice!

[@4x419]

thank you

[@dylanreynolds4899]

I have the np242 tcase and my azzy linkage came with 2 of the blue brackets with the relief cuts. Do I use both of these and is the process still the same?

[@danielvolk4741]

Great video I just ordered one today for my 2000 xj and Bryan Spiegel sent me a email confirming the linkage would work for me and said he will have it shipped tomorrow. Great company and amazing service never had a company get back to as fast as he did and felt like he Appreciates my business.

[@keithlea6804]

I dropped my TCase and it would pop out of 4 low. So I cut my shifter bracket on the 4 low end where it bottomed out to give it a longer throw. I cut a 1/4 ×1/2 notch and it gave an extra inch of travel to my linkage rod. Cheap fix for a cheap guy's . when your disabled you get creative with what you have. Great video by the way

[@JesusMartinez-fr6bo]

Do you have any pics of what u did im having the same problem rod will actually bend when i try putting it in n and 4L

[@stevee7774]

I’m liking this idea.

[@mgs8747]

Thanks for the info. I had to drive home in 4 high.

[@stevee7774]

😂 These factory linkages really suck!

[@Cherokee98]

Will tbis work with my Tera-Low NP221 with 2low , i have a AX-15 trans too...

[@tro8p]

Just fitted this and what a difference it’s amazing very smooth. I have all modes apart from 4lo… is it the case of making the arm longer using the adjustment ??

[@KSuspension]

Just gotta adjust it so you can switch into that gear Keep playing with it, you’ll get it!

[@Projectgearheads]

I got the Novak Conversions its smoothhhhhhhhh as butter

[@davidstephens8750]

Is there one of these available for my 98 jeep grand cherokee limited 5.2l v8 4wd with a 249 transfer case

[@rik0715]

I have a tj with a xj t-case. Which linkage would I need

[@herbiesnerd]

Do you know if this will work on my 1990 YJ 5 speed?

[@colescott8723]

Could you guys make a video about the best way to install your hood spacers? Especially if it’s possible for someone to do it safely by themselves

[@KSuspension]

Haven’t really thought of making a video for our hood spacers because it’s a 5min process for install. 4 bolts and you’re done But we’ll see about making one. Next time one needs installed I’ll record it

[@juliomaciel750]

Great video! Thanks! I am on the proses of orden this set up, hey what’s up with the drive shaft ? Double cardan and slip yoke ?

[@KSuspension]

The front shaft? It’s a normal front DS setup

[@juliomaciel750]

KSuspension i thought i was looking at the rear drive shaft, maybe I got confuse

[@KSuspension]

Julio Maciel the rear shaft is a front shaft used with the ironrockoffroad hack n tap SYE

[@juliomaciel750]

KSuspension thanks for the info !!

[@tylersargent8972]

You’re my hero. I just did things the hard way and converted my 2wd XJ to 4x4. The LAST part I thought I needed was that little bracket (the one that you were so happy to cut). I’ve searched several junk yards and they were missing on all of them. Now I know I can just get this product and eliminate that bracket all together! Are you still happy with it and does it still shift like butter??

[@KSuspension]

It’s the best

[@tylersargent8972]

KSuspension wow 🤩 that was a quick response on an old video! Thank you!

[@KSuspension]

Tyler Sargent always here 😎

[@AWD_T]

Omg. I need this even though mine is stock.

[@stormsmack69]

Was just out trail riding and needed 4lo and couldn't achieve it. Fortunately 4hi did the trick but Azzys is in the very near future.

[@davidleevDrums]

Hello, that truck uses a np242 or NP231 transfer because I see that it is automatic and the azzy part that was used for the installation is identical to the 231

[@hndaxr400rdr]

they're the same part, for the 242's Azzy provides an extension if you need it to fix the angles correctly.

[@MC-eh2ot]

So I'm just starting to take the old linkage off and trying to pop the old one out and it's not budging. Is there something on the ends that I need to take off first in order to pop them out?

[@KSuspension]

it's not easy sometimes, but it'll pop off. use a prybar or pliers to persuade it out

[@rohitter7878]

My question I have is with the first bracket you put in that had the 3 holes, which hole did you use the top one middle or bottom when you mounted the bracket first.

[@KSuspension]

Used the middle hole

[@rohitter7878]

@@KSuspension ok perfect cant wait to get this

[@Azzysdesignworks]

Middle hole will match the factory floor gate the best. If you need more rotational travel (custom setup, wear) use the lowest hole. Less travel, top hole.

[@sudonix5923]

They discontinued the TJ linkage which sucks bawls. Anyone know if the XJ will work? Maybe just a shorter rod or something? I really don't want to use the terraflex linkage. I'd rather support smaller companies cause i feel they make better quality.

[@dylanreynolds4899]

When I make the final adjustments on the turnbuckle should I screw it out until it's tight or what do you suggest?

[@hndaxr400rdr]

just snug. you'll know if it's too tight or too loose. just test with the shifter each time until it's smooth as butter and lock her down!

[@MC-eh2ot]

So I got the old linkage out. Got the new one in place. Tightened the shifter side down and now I'm trying to tighten the transfer case side and it's almost impossible due to no room. Any tips?

[@KSuspension]

Move the shifter down to bring the case link forward Then you can reach the bolt and nut

[@MC-eh2ot]

@@KSuspension oh crap didnt even think of that! Thanks so much for the feedback and response

[@anotheryoutuber_]

did your lever line up with the indicators on the center console?

[@KSuspension]

yes

[@tactical-bucket]

I bought mine and installed about a year ago.. The gears dont line up with the labels inside then vehicle now. 2H engages about 1/3 in between 2H and 4L. 4L isn't quite right and even though I can get it to shift into gear it pops into nuetral when I drop the clutch. 4H works fine.. what did I do wrong?

[@pagecreator6545]

you need to adjust the turn buckles. you do not have the correct length set

[@freddygarza5281]

When putting the rear bar with the 3 slots or holes. Which hole did you use to mount the rear bolt?

[@KSuspension]

for the turnbuckle? we used the middle hole

[@Righandwelder1202]

I have the Novak cable…. Is this comparable

[@dallcorobertson3991]

Can any one help tv cabe clip how do i fix without replacing entire cable

[@toddellis5197]

Any updates as to how its holding up? Also have 3 of your headlight kits installed, Perfect!

[@hndaxr400rdr]

we've been running these for years across multiple vehicles. Best thing you can purchase to make your shifting smooth!

[@toddellis5197]

@@hndaxr400rdr Thank you sir... I have a '98TJ manual, and my daughters and I love going out in the trails, but they can't drive a stick.I purchased a '95 XJ 2-door auto so that they can drive along too. The unibody is mostly solid, body is mostly solid, but the floors were mostly carpet, lol... The trans tunnel on the passenger side was good, but the drivers side is another story. Where the linkage bolts up on the driver side... Mostly rot... I can patch new metal in, but not like it was with that shifter linkage. This totally saved me! Thanks! Should I also consider this for my TJ? Havent had any problems...

[@hndaxr400rdr]

@@toddellis5197 I don't believe that they currently make it for TJ, however, I do recommend the NOVAK cable upgrade on the TJ. it's much nicer than stock and way stronger.

[@HeavyPickr0010]

I put my shift lever bracket on the transmission side of the lever. Then turned the turnbuckles all the way in and used the bottom hole. It was perfect off the rip, if anyone got the cheapo on Amazon😂 it had no instructions.

[@briandecker9026]

I have a 242 case, it's shifts great as long as I don't want 4 lo. It'll go in, but I have to crawl under the jeep to get it out of 4 lo the linkage binds because the arm on the case and the turn buckle are in a straight line. What did I do wrong?

[@ianazzarelli3110]

Have same issue, supposedly need another bar attached to shifter to add length and fix geometry. Still trying all possible combos

[@toddellis5197]

Did you notice at 15 minutes and then some, when you were shifting it, it looked like it was hitting a wire loom just behind the linkage??

[@hndaxr400rdr]

we moved the harness

[@paulgianni8528]

Is it suppose to rattle or did we forget to tighten something up. It does work good except I wish I would have removed the driveshaft when installing it. It would have been so much easier. I noticed the video it was removed after we installed it. I think it is an excellent product but it does rattle a little bit underneath and we are not sure if that is normal or not.

[@KSuspension]

shouldn't rattle, get with Azzy's and ask them for some support, They'll take care of you. gotta be something simple

[@dandahermitseals5582]

But mu 87 Comanche has a vacuum set up?? How do i alter that. Don't allways work. Ain't like this example. Mine has 2 piece axle. I understand yhe 92 axle is one piece? Seems like thT would turn the diff all the time 4x or 2x. Not good? Dandahermit

[@KSuspension]

This is for the transfer case. Not the CAD connect

[@jeffhermanski]

Does the front driveshaft have to be removed for instillation? Was this just done for the video?

[@KSuspension]

As described in the video, front DS doesn’t need to be removed, but does help to grant more space for working

[@jeffhermanski]

Must have missed that. Thanks for posting the video. Next project will be the cable upgrade and injectors from you guys! @@KSuspension

[@KSuspension]

jeffhermanski ya we forgot to say it aloud so it’s just an overlay typed in, easy to miss haha. Glad the video helped out though, it’s an excellent upgrade over the factory linkage!

[@geostanley409]

I noticed that you were shifting your transfer case while the transmission was in park. I have to have all of my Jeeps in neutral in order to shift the transfer case.

[@KSuspension]

while you're driving, it's best to put it in N then move to your 4wd selection, but just installing a new linkage, doesn't matter

[@dangerline95]

Does that variation with the 5 speeds apply to 5 speed Comanches too?

[@KSuspension]

You’d have to ask Azzy’s directly.

[@christopherduby5330]

If you do a motor swap and move your tranny be careful of the stock linkage. Im buying aftermarket because i bent my linkage pretty bad by mistake lol

[@williamdomey7584]

Will this work on a 2000 XJ with a NP 231. My linkage apparently has broken apart.

[@KSuspension]

yes it will

[@williamdomey7584]

I ordered it. Now I have to find someplace to install it. 2 back surgeries can’t do much

[@njrepresent200]

In the instructions I got it says jam nut on the transfer case side (lower linkage) and flat washer on the shifter side (upper linkage). But I did it your way. It probably doesn't matter

[@KSuspension]

We have since updated our description under the video That stated, I don’t think it matters, it won’t come off Just keep it on your routine checks after wheeling

[@njrepresent200]

@@KSuspension yeah figured they're both doing their job. Just gonna keep an eye on it. Still working on adjusting with my 4.5" lift. Great vid!

[@IManOPERATOR]

bad ass good job! i need to do this on my jeep

[@craiganderson7053]

you even wheel lol

[@joskybm]

R u supposed to put the xj on neutral or park

[@KSuspension]

for what?

[@TooBrokeToWheel]

I just attempted to install this on my '98 XJ with a 2.5L 4cyl, AX5 and a TeraLow case, the discontinued one with 2Lo capability. I spent 6 hours under the rig trying every possible configuration to no avail. I emailed Azzy's thru their website since I don't do fb or ig. I hope I can get a refund. Looks like I will have to go cable operated.

[@lepcur]

What was your outcome on this working with the Tera Low kit? I have the Tera Low kit as well..

[@dawhalen]

Was the linkage hitting a wire at the back of the travel?

[@KSuspension]

nope

[@jdwithheld8915]

@@KSuspension when you were inside the vehicle doing the test shifting and we were watching the camera image of the linkage motion, it WAS contacting and moving something (wiring?) immediately to the rear of the linkage. Also turn buckles are designed to be adjusted by turning the MIDDLE sector. That’s why they go to the trouble of using both right & left hand threads.

[@jdwithheld8915]

Oh Yea, wear some eye protection!

[@christopherduby5330]

What comes of the open hole on the transfer case after the swap?

[@christopherduby5330]

Should I find something to plug the hole ? Or doesnt matter ?

[@KSuspension]

What hole?

[@christopherduby5330]

@@KSuspension in/on the t case .. from eliminating the rod that goes from t -case to that bracket . I beleive you cut the rod in the vid. However im talking about the hole that the rod was coming out of . On other side of floor bracket side of that rod on t case

[@KSuspension]

@@christopherduby5330 leave it or remove it. It’s not used anymore. They’re bolted in from inside the cab, more work than it’s worth to remove

[@christopherduby5330]

@@KSuspension not the bracket... I'm talking about the open hole that's left behind in the T case. If you take a flashlight and look up there on the T case There's a hole that's the diameter of about 3/4 " . It would be my best advice for everyone to plug this hole after going after market I don't think it's a good idea to get a bunch of mud and debris in your Tc

[@joshhurley3247]

Will that fit my 98 zj with the 249 t case

[@hndaxr400rdr]

I don't believe these fit the ZJ models, you'll have to reach out to Azzy's direct to see if they have anything

[@joshhurley3247]

Thank you .I have bin having trouble trying to find something for my zj

[@justindoran8234]

Will it work for the 4.0 zj

[@KSuspension]

I don't think so, but you can ask Azzy's directly to find out

[@user-hc2il7bi1k]

Do these work on automatic yj's??

[@KSuspension]

Sadly, no

[@andred7415]

Has anyone used it on a zj with a 242? I cant find a yes or no answer

[@KSuspension]

don't think it'll work, but you can contact Azzy's directly from their website and ask

[@821702feb]

Will this work on a 99 tj

[@KSuspension]

Unfortunately not

[@340jd]

They don't have international shipping

[@KSuspension]

But we do, you can order through our website and we can ship overseas

[@antoniocalvino6409]

If you have a problem with the linkage being too short... they also have an explanation and a video to correctly make it work. kzbin.info/www/bejne/pZWZZZifeJyLqas

[@stevenlinder230]

Your jam nut was supposed to be on the transfer case side of the turnbuckle 😉

[@KSuspension]

Ya we caught that lol

[@carlosjovel7794]

Doesn't work on TJs . Linkage won't work if transfercase drop is installed. Forget about getting your money back. Buy cable instead.

[@KSuspension]

I don’t know if you’re speaking from experience or just something you read online. If it’s experience, I’m sorry you had problems, we’ve not had any issues yet, and have installed on TJ’s as well. As far as any support from Azzy’s, this is the 1st time we’ve ever heard anything outside of a 10/10, I hope things do work out

[@buschmaster4600]

My bracket isn't "sucking" itself into anything. I'm gonna return it.

[@KSuspension]

I’d give Azzy’s a call for some troubleshooting. Brains pretty quick to help.

[@sergvegas5446]

I made mine for $ 0.0 piece of metal and 2 bolts and lock washers😎

[@firefightervic]

1 commie watched this video.