Kt200-2 - 2013 VW Volkswagen Caddy 1.6Tdi - PCR2.1 Full Bench Read - Unlock Procedure

Make - Volkswagen
Model - Caddy
Drive side - RHD
Gearbox - Manual
Engine - 1.6 Tdi
Year - 2013
OEM no: 03L 906 023 PA
Continental No: 5WP42935 AA
***Take note***
So yes this can be done via obd.... ( i will also film this )
If it has been done via obd in the past it will show (in obd mode) Unlocked - Flash
If the ecu shows UNLOCKLED EEPROM - it is fine and DO NOT unlock again
So unlock procedure ( In my own layout ) others do it differently
***Step 1***
i.d ecu
14v - 14.5v
Click i.d
in box on right hand side it will show like this
Infineon Tricore TC1796
MCU ID: 418400851040395582060010240B0500
OTP Protect: 0x14000 -- 0x17FFF
ECM16TDI
03L907425C
ECU LOCKED By EEPROM
***Step 2***
Create 3 folders
"vehicle details" - Locked read
"vehicle details" - Unlocked read
"vehicle details" - Modified Map
***Step 3***
Do a full read / Backup of the ecu
Save files with i.d saying locked
Into the "vehicle Details" Locked folder
***Step 4***
Click i.d again
Click Write Eeprom only
Select locked Eeprom from - "vehicle Details" Locked folder
When you write Eeprom it will ask if you want to unlock - Click yes
When this is finished
it should Then show
Infineon Tricore TC1796
MCU ID: 418400851040395582060010240B0500
OTP Protect: 0x14000 -- 0x17FFF
ECM16TDI
03L907425C
ECU UNLOCKED By EEPROM
***Step 5***
Do a full read / Backup of the ecu
Save files with i.d saying Eeprom - unlocked
Into the "vehicle Details" Unlocked folder
***Step 6***
I always ( for no reason at all ) Modify the map from the "vehicle Details" Unlocked folder
Write this map - i always let KT200-2 Checksum,
so when it ask's i select the stock map from "vehicle Details" Unlocked folder
This way has always worked for me !!!
Using:
Bench power supply - Manson ep-925
Ecu help Shop
Kt220-2
Mfc/Pinout cable
Remaps are avalaible / File service is available / Help and advice
Donations of ecu's are welcome
Any make model or year
This will allow me to test more tools over more ecu's