KTM SMC 690 R Mapping TuneECU Tutorial [Flashing ECU]

This is tutorial how to put new maps to your bike, its called flashing ECU or Mapping. TuneECU is totally free software all what you need buy is diagnostic cable (40 USD from ebay). More info about this software you can find at www.tuneecu.com/.
============================================
PLEASE NOTE: Using wrong maps can damage your bike !
============================================
Every bike has different designed maps, so make sure to get correct maps. You need know EU and US map is not same.
KTM Map list: www.tuneecu.com...
============================================
O2 Sensor - If you turn this sensor off in TuneECU your fuel mixture will be richer, and that is very good if you are riding in hot area. But if you are looking for smaller Fuel consumption then turn ON.
SAI (SAS) - Disable this device if you don't have Stock exhaust with catalyzer inside. This device pumps air in exhaust to cold catalyzer.
I need say my English is very bad, but i have made this video to help other people. If you have questions please contact or comment below.
Social Media:
Facebook : / thedirtbikerider
Instagram: / thedirtbikeriderofficial
Second Channel: / thedirtbikerider1994

[@TheDirtbikeRider]

John Mardesich On my bike o2 sensor is disabled (turned off). I have noticed bike is much more easy to ride, no big engine braking when i let throttle off. And no stalling problem all is ok.

[@jmard]

Your English is great. Thanks for sharing this. I'm getting ready to do this to mine. What are your thoughts on disabling the O2?

[@SirJambo14]

What is the significance of turning off "SAI" and the 02 Sensor? Is it required or optional? Thanks in advance :]

[@bonghit2528]

Very useful thanks , your English sounds good I understood you perfectly. Just bought a smc 690 r today and this is new to me . Thanks for making this video

[@nilsmogensen2600]

I understood every word you said. Good english!

[@solytix1854]

There are no problems with your English there mate, thanks for this nice clear video. Looking at tuning my bike so this was very helpful ;-)

[@motobeard2781]

Great video and good explanation. Your English is great, the video turned out perfect and it is impossible to misunderstand any step. Thanks!

[@pisitsuebsiri8683]

Does the SMCR map from the Tuneecu.com works with the Enduro R?? if the bike is 12-13model.

[@HanTheOnevlogs]

is this work also for husqvarna 701SM 2016? there is KTM 690 engine from 2015 i think

[@JerronHonda]

Maps including the maps you did also use? I mean i got a stock one DUke 3 2009, TuneEco has a map that is better from the stock one?

[@TheDirtbikeRider]

+JerronHonda you need have custom maps, tuneecu is only software to transfer maps to bike

[@saysal681]

Hello thank you for this great video, I have a 2011 KTM 690 smc, I bought it with K&n cone filter , SAS delete and FMF exhaust I have FI light flashing I am told it needs to be cleared or reset? Can you please help me thanks

[@tomnorthover5676]

Great video. On the Tuneecu website there is a EFI and an EPT map (2013 KTM 690 SMC R). What is the difference or are both required to be installed? Any help is appreciated.

[@drewtalks]

Great Video, Thank you. I have a 2008 KTM 690SMC US model with FMF full exhaust and the stage 1 intake cap and filter. Which map on Tune ECU website would you recommend? Someone told me to use a UK map? any suggestions?

[@TheDirtbikeRider]

Hello. As far as I know there are only EU and US maps. I think EVO 1 will work best for you, and i suggest you to visit ADV Forum www.advrider.com/forums/showthread.php?s=a2884c5305af51edc346449bab08c508&t=685657

[@kalikrates1212]

hello can you tell me if i flash the ecu in my bike in position 4 (for example) the map i dowload to the bike will be in button position 4? or it will overwrite all the existing stock maps on the bike....in wich position on the map selector should i use it

[@bbaerialshots]

No problem understanding you. What map would you suggest for an 2007 Sm 690?

[@SBCxB0SS]

Is it the same "step by step" on a 690 smc (produced in 2009)?

[@philipvestman9762]

Hi. I have a KTM 690 sm -07 with a 25kW mapp. If a by a TuneECU-cable an get the mapp with full power can a do the same as you in the video? Thanks for a awsome video!

[@jamzzzist]

I have the 07' 690 SM Prestige. Yes, you can.

[@nicolasboisseaux3363]

Hello, i got a KTM SM 2007 in 25kw actually, dominator exaust, could i use a standard ou akrapovich exaust map ? And my second question is : if i got an accident could i put back my ktm into 25kw ?

[@daniellele9634]

Thanks bro! Great video understandable and easy for everyone to do! Thanks alot.

[@cirua1]

Hi! Thank you for sharing this information. Can you help me please? I have KTM 990 SMT with a bad Immobilizer. I cant find a new immobilizer, but there's available lockset with immobilizer which is very expensive. How can i by pass immobilizer? Will it work? Thank you

[@nikosvagenas5309]

hi the Dirtbike Rider. i want to ask you which kind of obd i must to use for ktm duke 690 2009? thank you

[@alfonsoarnaude3358]

Hello bro, can you help me? My Husqvarna 701 lose the neutral sensor calibration,? I use tune ECU but i don't know what to do, please can you help me?

[@joseantoniopiqueras5458]

Hola tengo una KTM duke 690,y quiero ver qué se puede hacer para darle más alegría. Esta limitada en centralita.

[@mitrousis.guitar]

My dear friend very good video! I have the 690 enduro 2008 model with only acrapovich end exhaust and stock pipes. and K&N air filter. I have not removed the plastic pipe on the top of the air box that is on the air filter. Should I remove it? I lso like to ask you on minute 3:25 seconds on the video , after the f.i.map open, Why do you deselect the SAI and O2 sensor boxes? what they are for? Thank you very much my friend!

[@TheDirtbikeRider]

Yes remove air filer cover and put evo 1 filter cover or make few holes in stock one. SAI (SAS) Secondary Air System, will pump air in your exhaust to cold catalyst (on stock exhaust), most custom exhaust dont use this so you dont need anymore SAI (SAS) turned on, and O2 sensor is for fuel/air mixture and it will lean your mixture so its better to turn off your bike will run better.

[@mitrousis.guitar]

Damir Hairlahovic thank you very much!!

[@LudiisVideos]

Hello, I can copy the existing mapping and after a throttling again on it?

[@Gaby180395]

Hello. Thank for vidéo. Clicliclic in valve admission it’s ok?

[@anwarelbardai3232]

what alarm system do you have on that bike?

[@falcon5866]

Hi,i have KTM smc 690 2011 with leovince exhaust,air filter k&n and open cover for airbox and remap tunning kit evo1,how is better for engine with SAI and O2 on or off.

[@TheDirtbikeRider]

You need turn off SAI, but turn off/on O2 is what you more like.. For me when o2 is turned off i don't get that engine braking when i let throttle so i like to Turn Off o2 and i have noticed in city i dont need more radiator fan when o2 is off.

[@nishantthevirus]

can I follow this same process for my ktm rc390???

[@tomislavvistica3240]

I have KTM SMC 690 2011 year model...can I use the same map. Have a nice day.

[@2005ent]

Hi there , Could please tell me ,did you use a especial ECU or a Programmer (dyno jet )or something or is it possible to use any map that fits my ktm 690 sm direct in to the stock ecu ? Please advice ,thank you in advance .

[@TheDirtbikeRider]

2005ent i have used evo1 map because i have open air filter + open exhaust

[@2005ent]

The Dirtbike Rider so ,that means I can use these maps on my stock (factory ecu)?

[@TheDirtbikeRider]

yes, you can

[@ninjamediaman]

Very good video. I am looking to do a honda pcx and a yamaha r15 but the information available is difficult.

[@TheDirtbikeRider]

You need find information on forums, take your time and do this slowly.

[@raoulduke7553]

I only have one map not the 2 that you downloaded. Where do I get a FI map from?

[@misterbeen247]

Hello sir, thanks for good tutorial. My 690 smc is restricted for 32kW because europe rules... if i do this like you in video, will i have full power again? Thanks!

[@joonabremer9267]

Did you figure it out? Or we seem to have the same problem :D I also heard that by remapping you can have full power.

[@misterbeen247]

@@joonabremer9267 still waiting and looking around for an answer... seems like private labeling/packaging is the only way out of this problem. But the profit margins should be atleast 30% otherwise this method is way too expensive.. kind of stuck at this moment because of this problem. I don’t want to start dropshipping and lose out customers after the first purchase because of ugly packaging full of chinese letters

[@joonabremer9267]

@@misterbeen247 Im even more confused after this comment :D

[@ВячеславПозницкий]

I have ktm duke 690 2016. TuneEcu flashing my bike ?

[@nadeeprider1806]

Can do top speed unlock in duke 390....?

[@RobinDerFuchs]

hey! where can i get these cable? i have a ktm 690sm.

[@dancerrider4226]

hello I need some help, I have a 2007 KTM 690 supermoto, I change the mufflers and I loose power, why this is happening, do I need todo some flashing ECU? thank you for the video

[@bbaerialshots]

Hey Dancer Rider, did you find out anything ?

[@TheRyan668]

I keep getting a FI code 09 anybody know what might cause this? I have not installed the TuneECU yet.

[@DerJustinLP]

Im running my KTM SMC 690 with standart exhaust? Should I turn on O2 and SAI or not? Everything is factory...

[@TheDirtbikeRider]

Turn off, :D

[@DerJustinLP]

ty

[@motardmax9508]

do I need drivers for this program?

[@iArthas1]

so i have resctricted power map (32kw) if i download any maps from the site of tunecu, the bike will be at full power?

[@TheDirtbikeRider]

You cant use "any" maps for your bike, it must be correct maps or you can damage engine. First connect your bike and read maps then you will know what maps you have now ( stock or Restricted power). Do you have any mods on bike like exhaust or open air filter ?

[@bbaerialshots]

@@TheDirtbikeRider Many years have passed I know. But same situation now. Restricted 32Kw 2007 Sm. Which map should I pick ?

[@FokyRacing]

This can be use in KTM/Husky Tpi models? Great video 😀

[@xGxPhantomZzz]

Nope

[@Clift3155]

Can anyone email me the windows version of tune ecu? It’s no longer available

[@flexinator98]

why the bike need to run 15 minutes at the end ?

[@philipvestman9762]

I should also add that that the engine isn't running good. When I releas the gas to shift gear the engine dies. Can I get rid of this problem with a new mapp?

[@TheDirtbikeRider]

Yes you can Fix stalling problem with new maps, have you any mods on bike like custom exhaust or air filter.

[@philipvestman9762]

Yes, I do have a custom exhaust but I can't find a mapp compatible with it. Were do you recomend mi to by the cable, mapp? Do I nead something else?

[@TheDirtbikeRider]

Philip Vestman If you use stock maps with custom exhaust what has more air flow then you will have problem with bike. You need map with more fuel. All maps can be found on TuneEcu site

[@racar7211]

Hey thanks for doing this Tutorial. Do you know some contacts how i can do this for the SWM 125 R Greetings from Austria :)

[@raffi4893]

Was willst du damit an einer 125er machen xd

[@popopopsss]

Hello, i have the same problem that iArthas1and same bike : ktm duke 690 2014 restricted A2. i have try to search on tuneecu website but it's say "not compatible for duke 4 models". have you maybe an other solution for turned bike to full power ? (44ph to 70) or have you news for make this with tune ecu ? please

[@TheDirtbikeRider]

Download stock maps from bike and you can try to modify in tuneecu to unlock all power. FI map should be same in "stock" and in "Restricted power map". But EP map is different. Full Power map has 100% on end and restricted has only about 35% maximum. I suggest you to leave Restricted on Standard setting, and make Full Power on Performance, so you can switch to full power and back to restricted with one turn under your seat.

[@paulo5626]

Damir Hairlahovic Thanks you i'll try

[@nowak1994]

thank you very much for the nice video

[@falcon5866]

And one more question,can i change rev limiter

[@TheDirtbikeRider]

Why you want do this ??

[@mrconta]

Are you good with ktm? I have a problem with my 690 i bought. its from 2012 and the pre-owner states it have EVO 1 map on it. It have EVO 1 airbox with foam filter and LeVince Slipon. The bike runs really bad without the DB killer. it dies on idle, pops and bangs on lower revs and runs rough on low speed with twitchy response on the gas. When i put the DB killer in the slipon the bike runs great with good idle and not twitchy. What can be the problem? is the back pressure to low? is the mapping wrong? I want to be able to run without DB killer but i cant do it at the moment. I have changed spark plug and the coil (the tip was gray/white) I have changed fuel filter, Inline fuel filter, fuel pump. the next thing muste be the mapping?

[@TheDirtbikeRider]

I had the same problem, with the db killer the engine runs much nicer and doesn't shut down. It is necessary to add more fuel to the mapping. Everything is explained in the video.

[@andymohabir5894]

hi is there any remapping available for the ktm 125 duke? can I use this app to scan my bike for fault codes, or is this only for the 690?

[@TheDirtbikeRider]

+Andy Mohabir can work with any ktm

[@andymohabir5894]

Thanks mate, where can I get the tune ecu software to download? Any link?

[@TheDirtbikeRider]

on tuneecu site, check on google

[@mohommedzameer2129]

Hi I have a 690 Supermoto 2008 and installed arrow exhaust system, my bike stalls every time when downshifting and low rmp rates ,will this sort my problem. pls help me

[@TheDirtbikeRider]

you need get richer map

[@mohommedzameer2129]

Will this problem sort if I adjust TPS or is there a map switch on this model

[@TheDirtbikeRider]

you need put db killer and try, but i suggest you get maps

[@mohommedzameer2129]

yeah, I don't have DB killer in that. is that the problem actually.I cantt find the map switch under the seat. after installing a DB do i deen to adjust TPS voltage for factory.( 0.50-0.54V)

[@TheDirtbikeRider]

get db killer bike will run more better

[@wylandhuntington4382]

How do I download to my laptop? I only see android

[@iArthas1]

hi, i want repowering my ktm duke 690 by 32kw to full power, it is possible? what maps i use?

[@TheDirtbikeRider]

If your bike is full stock, then you need use maps for stock exhaust. That is all what you need to do if you have now "Restricted power maps". Just connect your bike with TuneECU and see what maps you have now.

[@supernikketto]

Good morning. I can't find the full power map for my duke 690 2013, help me please

[@TheDirtbikeRider]

nicolò favilli you can find on tune ecu site or on ktm forum

[@lppedd]

+The Dirtbike Rider Do you know If there is a way to flash the new 2015 version?

[@TheDirtbikeRider]

i think you need get other ecu to do that,

[@lppedd]

Yeah but the 35kw limit is set in the original ECU

[@carloseduardosolanolabrada295]

Is posibble from ktm duke 200 2014 ?

[@FabiOderSo]

Carlos Eduardo Solano Labrada No. You can find a list on their website with all supported models, unfortunately your 200ccm Duke isn't listed.

[@chamillion91]

Hello, nice video! Where I can find map for KTM 690 SMCR 2014?

[@TheDirtbikeRider]

i think 2014 model is locked, all maps can be found on tuneecu site

[@Duffyhs]

KTM has stopped the possibility to read or write the Maps with tuneecu at the Duke 4

[@TheDirtbikeRider]

That is bad info, but i think there will be some "way" to modify bike map

[@Duffyhs]

You CAN modify the data in another way. there are two nearly simmilar ways to do this. With a litte "Black-Box" called "Kastl" from an Austrian Enthusiast, or the PCV. Look for both at Google

[@TheDirtbikeRider]

Duffyhs That way is more expensive, but its worth money.

[@Duffyhs]

Damir Hairlahovic I've done it

[@impactvision]

Great video, good english too. Thanks!

[@ztrycker]

Hello! Is it possible to use EVO 2 with FMF exhaust?

[@TheDirtbikeRider]

Yes :)

[@ztrycker]

The Dirtbike Rider Do you have maps only for exhaust, without EVO kit?

[@TheDirtbikeRider]

Evo1 map is for exhaust only, and evo 2 maps are for for EVO 2 kit.

[@excelsior9128]

Thanks so much Nice tutorial 👍🏻👍🏻👍🏻👍🏻

[@dannyaustin84]

Great video! Thanks

[@ollie682]

Can anyone provide me with the map files?

[@alessandromessina2593]

For ktm 690 smc r 2014??

[@DerJustinLP]

No, this one is locked :(

[@popopopsss]

Hi , tune ecu don't work with duke 4. i don't no what to do :(

[@TheDirtbikeRider]

Some diagnostic cables are not good, if you have connector on your bike it must work just get great quality cables,

[@popopopsss]

Damir Hairlahovic I'm not sure it is cause cable beacause it is specified on tune ecu website that does not work with duke 4

[@TheDirtbikeRider]

westsidestb Have you tested to connect tuneecu with your bike ? if that info is from tuneECU site maybe that is correct.

[@iArthas1]

ok thank you.. I'll let you know

[@iArthas1]

can u tell me what map i need use?

[@TheDirtbikeRider]

Please send me message with correct year of bike, and i will help you.

[@zytouille1963]

Thanks man, very helpfull :)

[@iArthas1]

i have only akrapovic

[@iArthas1]

duke 690 2014

[@TheDirtbikeRider]

First you need read maps from your bike to see what you have, because i cant find 2014 maps. Maybe older maps will also work with your bike, but i cant guarantee that, if have time visit your local ktm dealer or make phone call.

[@falcon5866]

just ask if it is possible

[@TheDirtbikeRider]

all is possible but dont play with that it to much dangerous. If you want to tune your bike much more than remap get power commander and quick shifter. But i think best mod for this bike is exhaust + open air filter cover + remap all other is to much money.

[@way2yugo813]

any way to do it for duke 200?

[@TheDirtbikeRider]

what year ?

[@way2yugo813]

2014

[@TheDirtbikeRider]

Sorry but i don't know, 2014 models are locked. You need check your ktm dealer.

[@way2yugo813]

AFF Racing Team - Damir they sell Programmable Racing ECU for KTM DUKE 200 in India but mucho dinero $$$, there must be a way to map the ECU with a wire like this dude. KTM dealers here in Turkey are idiots, I know more about my bike than my dealer...

[@TheDirtbikeRider]

Yiğit Özceyhan I think ecu original from ktm 2014 is protected so you can edit maps.

[@finnsillibourne9772]

U speak good english

[@HeroDanny]

Anybody do this for the ninja 300? Please reply, i'm considering doing this... also, is there any real risk for destroying your bike?

[@TheDirtbikeRider]

there is no risk if you use right maps

[@rogerkaczmarek6471]

thanks a lot man

[@falcon5866]

Why SAI is off

[@TheDirtbikeRider]

SAI (Secondary air injection) is needed when you have stock exhaust with catalyzer. But leovince is open exhaust without catalyzer so you dont need SAS (SAI) turned on, just turn off and all will be ok.

[@muhdsyafiq3081]

The Dirtbike Rider Great Video! Question, did you remove the SAS? You're using the evo 1 filter and evo 1 map for the leo vince exhaust right? Is it advisable to use the evo 2 package with a leo vince exhaust? Thanks and sorry for many questions!

[@TheDirtbikeRider]

muhd syafiq No i haven't removed SAS, i use evo1 filter cover and evo 1 map for leovince.You can use evo 2 package with leovince, but if you have money i suggest you to get akrapovic :)

[@b4rL1nA]

What's about a mapping for SMC-R '16?

[@purpleom1]

Thanks

[@TheDirtbikeRider]

You are Welcome.

[@andymohabir5894]

cool

[@gmrocwater9922]

What happened to the days that you could just jump on your bike and go for a ride, WTF

[@chamillion91]

Please get map for SMCR 2014 =)

[@supersato-m9y]

is that way work on ktm 450 sxf ? thanks