Kubota KX033 Review | Is It Worth Your Money?

[@shawndunleavy892]

I have an 033. It’s an excellent machine. My recommendation would be get it with the enclosed cab and the thumb option. Very comfortable cab, machine runs great! I traded In a John Deere for mine. I’d never go back to Deere after running my kubota

[@bmwbaker]

I love that the 33 is just a diesel without the emissions crap.

[@northeasterndirtandpropert7974]

I'm running U-25 super series.Amazing what kind of lifting and digging force these small machines can put out.I like zero tail swing solely for the close quarter work that sometimes is a must in small town or city lots.All good machines.

[@kubota33]

I am impressed that you know it will dump into a dump truck. I have filled full sized tri axel trucks many times with mine. How did you know that? Great video

[@Terry-g1j]

When you connected to KX hydraulics did use use bypass valve so return fluid doesn't have to go through hydraulic valve, this makes quite a difference. I have same machine but a flail mower bypassing hydraulic valve I am supposed to get full GPM from pump as a FYI

[@jamesrowley8055]

Question-- What is the smallest excavator that kubota manufactures with a factory cab? Thank you!

[@jayvakathemacguyver8472]

Hi at the 3:05time mark, you start to speak of the Kubota’s new premium coupler design that allows the buckets to be turned around. I have a kx033 machine with that same wedge coupler in the video. Can you explain this further? Do I require a different coupler that’s shown on the machine in the video to allow the buckets to be turned around like a pin style coupler? Thanks

[@alstammers]

Thank you for this excellent review. I am considering the U35-4 vs. the KX033. What would be the point of selecting either of these 25 HP machines? Is the zero overhang the biggest difference?

[@btmacfarlane]

The U35 sits on a wider track width but zero tail swing. If you need the smaller width go 033 if you need zero tail swing go 35. Both will have roughly the same power.

[@bilolustoev5687]

@@btmacfarlane hi how much is it Combo 4 tone? How can I buy it

[@terrymcgillicuddy8056]

Awesome channel 👏 very informative..

[@frankt7474]

Mr. jack....if you had your pick of a new '23 KX-33 or a used 22 kx 40 with hours 300 hours for the same money, which would you take?

[@btmacfarlane]

If you are working in tighter areas I'd go with the 033, If not I'd pick the 040 for sure.

[@jameshalliday412]

Nice review. Any in stock, or what’s the wait time on ordering one of the slightly bigger ones? (40 or 57)

[@COFirefighter]

When will the KX040-5 be avaible to order?

[@briansmith8405]

Enough hydro flow for a Mower or mulcher?

[@COFirefighter]

I might just weight for the KX40-5 at this point.

[@lordchaa1598]

Speaking of numbers, what’s the ballpark on a machine like this?

[@troyr57]

Not sure currently but I bought a Open station one last Christmas for 47,000. But with taxes etc came to 52,000 approximately. This was in Louisiana.

[@lordchaa1598]

@@troyr57 , thank you. I had guessed it to be in the 50k range. Very nice machine.

[@cyumadbrosummit3534]

@@lordchaa1598 Its $61k before taxes for a KX033-4 with a cab. Confirmed through two competing Kubota dealers.

[@bigjimflying7195]

The usual answer is “call for current pricing”.

[@shawndunleavy892]

Mine was $58k. Enclosed cab, radio, heat, ac and thumb

[@robbiesmith9786]

How much is it

[@rogerforeshee7931]

How much.

[@Z-Bart]

Price as shown?

[@jonathantaylor6926]

60 ish.

[@zzzzeus99]

that thing will lift a lot more than 2100 lbs, my u25 will lift 2100 lbs close to the machine

[@johnwalter564]

360p? Really?

[@btmacfarlane]

It’s in 1080p, just change your settings!