KUN26 Pilot Quanity Learning Special Function G Scan

[@PantoEfrenJr]

Very nice! And very informative 🙏

[@patriot1730]

When you accelerate to reach 3k do you plant your foot down, or lightly throttle? as it says it should be done with no engine load

[@repcoequipmentsouthisland4606]

Plant your foot, from what I understand it learns as it goes back to idle.

[@rickywiddicks]

Yea mine said let it idle as well

[@توفيقخضران]

Thanks but the cooling temperature must be 80º or more. can you or someone show me how to do whith techstream please?

[@150_ADVenture]

Did the noise disappear after this reset?

[@tabs123456]

Hi, after the pilot learn is done do you need to save the setting/new values?

[@repcoequipmentsouthisland4606]

Nope, this procedure learns and saves the values as it is done.

[@martinsilitonga5751]

I am a Toyota Innova 2006 car owner, I have a problem after making repairs to my 4 injectors, after checking using the 4th scaner I injectors are all good, but what if I take the road at low speed the sound of the engine becomes rough like someone knocked on the engine . guess what is the cause?

[@repcoequipmentsouthisland4606]

Could be a great mean different things. I suggest you take it to a mechanic.

[@winardytyos9846]

Hi.. I have a question.. I already did exactly what you showed in the video.. But I can still hear knocking sound in idle mode when I first started the engine in the morning...

[@repcoequipmentsouthisland4606]

Injectors could be worn or Suction Control Valve could be worn, Only a Diesel Specialist could be 100% sure.

[@winardytyos9846]

@@repcoequipmentsouthisland4606 I replaced one injector no 2.....i notice that if I use the car at night then in the morning the engine sounds OK, but if I don't use the car in the previous night it is more likely to make knocking sound in the morning the engine is still cold

[@repcoequipmentsouthisland4606]

@@winardytyos9846 Again, Best to get a Diesel Specialist to look at you problem. It could be many things. We only sell Diagnostic Equipment not Repair Vehicles

[@peterdatechmen5506]

wow that 150 odd revs sorta puts you in sleepymode, enjoy the g-scan vids though

[@repcoequipmentsouthisland4606]

Minimum of 10 times per cylinder, but yeh you do start to wonder wtf is going on!

[@Nzkiwi-f6l]

only well over 100 revs .. way to go toyota .. dam thats right i own one ...