KYMRON small Excavator attachments ALL put to the test!!

In this video we put all the KYMRON small excavator attachments to the test!
Call us today 918-215-7284 or go to www.kymronsales.com
China Excavator attachments

[@coverbg]

good explaining and good control the excavators... thanks

[@ralphnorris-vk8ff]

Can you put the material bucket on backwards and use it for a shovel? Makes it a lot easier to scoop out of a pile.

[@dandersen53]

No. Maybe with the quick hitch.

[@JeepArmyUSA]

Do you offer a stump grinder auger option that works for your smallest excavator? And if so, a demonstration would be awesome. Thank you

[@shanehanson7514]

That would be awesome

[@a-veteranlandscapesitework2413]

I like that quick hitch.

[@SuperBowmans]

Nice, wish there was a Kymron dealer around the northwest GA area.

[@roberttaylor2616]

Can you split fire wood ‘ maybe with a modified claw?

[@JusticeWhittekiend-dq2zj]

i like the wide tracks great video

[@JohnDo-ntchaknow]

Here in where I am in Texas we have a lot of rock so any post holes would need to be drilled through some hard rock. I do like the hydraulic hammer though.

[@MostlyPosative-nj5ex]

I feel like a small front end loader would do a better job of moving an above grade pile of soil or gravel. Excavators seem to be slow and clumsy at that task.

[@kennethney4260]

For max efficiency you reallyneed to get on top of the material when loading with an excavator

[@troyb.4101]

That is the color I want (white), easier to see the dirt. Great video. I have like 1,000 small mesquite trees to remove from my 55 acres.

[@ronlicari5403]

Do you have a T-Post driver for that?

[@Outdoorsy368]

Looking forward to a dealer in southern lower Michigan, maybe around Kalamazoo or so.

[@cbdeuce8144]

Anything coming to Texas?

[@tracy419]

Looks like the sanding bucket would be good for sifting compost, too.

[@survivalguyfyi5718]

Would you ever consider doing a video demonstrating your forklift attachment for your excavators maybe on an XH26 or XH42? I'm curious to see how the backstop of the attachment works without hitting the dipper stick. I also think there are many people who are unaware that such attachments exist for excavators and that it essentially turns them into a crane forklift.

[@majorpixchannel7146]

Hello 👋 We mill lumber with bandsaws and chainsaws! Also build chainsaws. We need a machine for moving around 1,000 lbs logs. We are located near enid Oklahoma! We will mainly just be logging or loading the sawmill!

[@krequipment]

We have what you need check us out at www.microtrackhoe.com

[@shoolsux]

Would be cool to see how the pallet forks work on an mini excavator.

[@waynebeebe5745]

Will the attachments work on other mini manufactures?

[@sparkplug0000]

I have seen stump grinder “screws” that resemble an auger but shorter and designed for skid steers to push down through a stump. Do these Kymron’s have sufficient hydraulic flow and power for one of these grinders? I’m guessing it’s similar to the auger.

[@villageearthwright]

I liked the look of that mini dumper,, are you planning to have those in stock? Also, how come you don't do main pin thumbs on any of your machines?

[@cliftonw1365]

Id like to get a hyd thumb for my agt.ive been looking everywhere. Do you sell them separately?

[@danielbarnett6859]

I can see were quick att.would mess with the digging force.

[@irakozak1]

When digging the angle trench once the bucket is in the ground the way you want the trench just drive back and it will continue the trench. Of course you had the tree behind you. Nice little machine

[@chuckcorley9008]

I would have liked to see you use the thumb with the rake to move the pile you created in the video.

[@jtsokiehobbyandadventures6666]

If you are going to buy the larger bucket. Spend the extra and get the tilting bucket. And the larger sifting bucket.

[@jonathantaylor6926]

Tilt buckets are too heavy for these little 16 HP machines.

[@jtsokiehobbyandadventures6666]

@jonathantaylor6926 I have the 32 inch and used it on mine

[@jonathantaylor6926]

@@jtsokiehobbyandadventures6666 From this manufacture? How's not holding up? They are like 1/3 the price of other brands. Are you affiliated with this company or just a customer?

[@fordman77881]

How much for the white one

[@geoffwhite769]

Are these Chinese parts assembled in U.S.?

[@manko4028]

When will you have a video of the Zh12g excavator?

[@manko4028]

Sorry. I was thinking of another company.

[@Merix_94]

Is it possible to mount the bucket upsidedown? (entrepreneurly not indirectly)

[@krequipment]

Yes you could reverse the buckets no problem be sure to check us out at www.microtrackhoe.com

[@jeffreyabelson7171]

are mini excavator attachments universal or proprietary? Thanks!

[@nickhahn5412]

What powers the jackhammer ?

[@dakotak8437]

Do you have any KYMRON RH14G with he pilot controls for the same price

[@rogergilliam6263]

Does the 2812 have safety switches if you got it a tilt

[@balamala2647]

Are all of these machines built in China?

[@DavenH]

Kudos for actually showing these off instead of just depicting them in their unused glory!

[@Ful-OGold]

Those screw hitches break. I mean the bolt snaps. Iv done about 5 of them in 300 hours professional hours. Bolts are easy enough to source from a bolt store but it’s still annoying when it happens and doesn’t look good when you’re on a job. The teeth on the buckets are on upside down so you can’t clean out a bottom of a trench properly. The augers are a joke, mine came with the cutting tip on upside down and the cutting edges arnt positioned properly so it’s like trying to use a blunt drill bit to drill into steel.

[@mcrane2653]

That seat looks pretty tight. Anyway to slide it back another six or eight inches?

[@krequipment]

all seats are adjustable, the guy in the video likes to be forward and close to the controls.

[@mcrane2653]

@@krequipment let's see a video with some 350 lb guy running it.

[@javierparreno1250]

OK EXELENTE😨

[@stilltuckered]

Missed using the thumb

[@richardoverbaugh4922]

would you be willing to Partner dealer with me I have 3200 sq ft shop and full-time mechanic and parts lady with salesman I'm a Husqvarna dealer. in northern NY

[@javierparreno1250]

is from JACK HAMMER¡¡¡¡

[@03treefitty]

Can i upgrade xh20d to a 2 speed?

[@krequipment]

That's not an option on the XH20D, you would need to go for a ZX22 series of machine to have that feature