Build a Drill Press Table for PBD 40 / DIY

I enjoy using the drill press of the Bosch Company called PBD 40.
It is an attractive product with a circular handle.
The bottom plate was made of aluminum, so it looked pretty but it was a little uncomfortable.
So I upgraded the PBD 40.
The table was enlarged and other equipment could be installed.
If you use this drill press, I think it's something to consider at least once.
Recently, I continue to focus on upgrading the drill press.
In the next video, I'm planning to make a beautiful dust collection equipment using acrylic for this work.
Please keep an interested eye on how this product evolves.
Thank you.
#DIY #Bosch #DrillPress #Woodworking

[@Kynosys_]

I enjoy using the drill press of the Bosch Company called PBD 40. It is an attractive product with a circular handle. The bottom plate was made of aluminum, so it looked pretty but it was a little uncomfortable. So I upgraded the PBD 40. The table was enlarged and other equipment could be installed. If you use this drill press, I think it's something to consider at least once. Recently, I continue to focus on upgrading the drill press. In the next video, I'm planning to make a beautiful dust collection equipment using acrylic for this work. Please keep an interested eye on how this product evolves. Thank you.

[@Neo-ue6ys]

Very nicely made, but if you fasten parts with screws, washers should be placed under the nuts

[@bradleytuckwell4881]

You’ve out done yourself on this one it’s a beautiful design I love the storage area for your replacement plates and those drawer pulls are great. I’m looking forward to part two

[@user-xn1yg3ie9p]

드릴링 테이블은 주물로 제작한다는 고정관념을 갖는 1인데요 훌륭합니다. 우드로 만든 테이블이 수납함 등 다재다능한 역할을 하는 것에 놀랍습니다. 항상 응원합니다~

[@Kynosys_]

드릴프레스 작업테이블이 너무 고정관념에 사로잡힌듯 모양들이 똑같습니다. 동그란 테이블에 위아래로 움직이고, 기둥에 조여서 고정하는 형태지요. 형님도 발명인이니 잘 아시지만, 저희는 그런 고정관념 바꾸는걸 워낙 좋아하잖아요^^ 성원에 감사드립니다.

[@ashleychambers7602]

I’ve had this drill for over 2yrs now and it’s been a great bit of kit apart from one of the threads on the locking height handles failing so replaced with a better quality one.

[@Kynosys_]

It's been a while since you used it? It seems like a product that has its own pros and cons. I'm still using both of them well, but I think I need to change the drill chuck to a stronger one. thank you

[@VastCNC]

Really wish these drills were more common in the US

[@LeonWiddicombe]

lovely build.. I have this drill press and love it.. I want to make something similar.. I was thinking of making the replaceable plates rectangle that you can slide along.. as it seems a fair bit of effort to cut a plate for it to only be useful once (from a tear out purpose etc)

[@stephenzello3519]

Very nice. I wish they sold the PBD 40 in the USA.

[@raysmith1992]

Wow you are amazing the attention to detail is something else and your craftsmanship is amazing

[@Kynosys_]

I'm still working hard on the details. Thank you for your kind words!

[@seyoung_nusu]

멋진 작품이네요... 따라서 한번 만들어 보고 싶네요... 항상 잘 보고 있습니다... 좋은 영상 감사합니다.

[@PJ1R]

Brilliant, as ever very inspiring, especially now as I am about to start fitting out my newly extended workshop

[@Kynosys_]

It is a very happy experience to hear that I have given someone a little inspiration and hint. Thank you very much. I will support and encourage you to create a wonderful workshop.

[@efektmurowany]

Man, this is what i needed for my bosch 40 🎉🎉🎉❤❤❤

[@jelias9247]

Wow! It really looks great!!! Very nice job! Can’t wait to see the next video!

[@PedroAlves-ee8vk]

Hello, very good 😮😮, salutations de Suisse 🇨🇭, à bientôt 😊😊

[@allansmith3837]

This guys workshop is worth 3 times what my house is worth.

[@jimrosson6702]

Wow absolutely amazing as always.great job amazing idea. Can’t wait to see what you do next.

[@Kynosys_]

The next video is also about a new type of dust collection method, so I think you'll find it interesting. Thank you for your continued support.

[@jameslovering9158]

If I only had the room :-) my drill is stored under the bench when not in use due to constraints.

[@Kynosys_]

The question is, do you want it? Or maybe not. Seeing that you're interested in my videos, I think you'll want to create your own workshop. I guarantee that if you continue to pay attention, one day you will have a much better and more beautiful workshop than mine. I will wholeheartedly support you. thank you!

[@user-ce7on9ts9t]

Très intéressant surtout que j'ai la même perceuse à colonne Bosch , je vais m'en inspirer .

[@Kynosys_]

Nous pouvons ressentir un sentiment de parenté et de camaraderie simplement en ayant la même machine. C'est notre devoir et notre plaisir de partager comment mettre à niveau ces machines. merci We can feel a sense of kinship and fellowship just by having the same machine. It's our duty and pleasure to share how to upgrade those machines. thank you

[@patbird9694]

You sure think outside the box. Yes. I will be happy to borrow your idea once again. Good job designing it sir

[@Kynosys_]

If my work can be a small hint for your work, I would be very happy. thank you!

[@Lucagricole]

Unbelievable 🤩

[@arthurheijmen9517]

Nice work.

[@Kynosys_]

Thanks for your interest!!!

[@MyElmo1984]

great work. could I perhaps get the dimensions of the worktop?

[@onkelmaane]

Great idea, would love to build this for my pbd40, where do you buy the Nice drawerhandels that pop out, they are really cool👏🏻👍🏻

[@GiancarloFiorelli]

Eccellente, com'è il tuo solito. CHAPEAU

[@davidgreenwood5241]

Think you’d have to be a millionaire to afford that equipment

[@NeNNoPromo]

Nice one. How do you have make you automatic opening and closing drawer (at 13:41)

[@ilgincseyler5174]

MERHABA MAKİNEYİ AÇTIKTAN BİR SÜRE SONRA DURUYOR ÇÖZÜMÜ NEDİR

[@Kynosys_]

This is one of the features and advantages of this drill. This is also for safety reasons. When drilling, this gives you ample time to turn on the drill with your left hand and then hold the wood with that left hand again. Make good use of it. thank you!

[@TTAJ]

Like168 영상 잘 봤습니다!! 또 오겠습니다!!

[@Kynosys_]

좋은말씀 감사드립니다.

[@erikcramer]

I have the same drill, I wish it had a reverse for tapping, and I've never used that clamp that comes with it 😂

[@Kynosys_]

I am also very disappointed that there is no tapping function. And, if you try the clamp, you will be very satisfied. This is a well-made part. thank you!

[@erikcramer]

@@Kynosys_ perhaps a nice video making a reverse option for the motor.

[@Kynosys_]

Very good suggestion. I want to tear off the drill body right now. Reverse rotation of the motor to install the tapping function. Let's research it. thank you!

[@erikcramer]

@@Kynosys_ hope it's just reversing polarity

[@Selkian]

What is the chamfer tool? What is to bit you used to ream the holes?

[@whoDatBeDare]

any chance you'd have plans for this?

[@DTAWorx]

Very nice indeed. Do you have plans available for this design.

[@Kynosys_]

I usually work with rough sketches. However, there are many people who want drawings, so I am planning to draw drawings through reverse engineering when I have time. Please refer to the channel. thank you!

[@wthorwirth]

Your router table needs an dust extraction! (Hole or table end collector)

[@Kynosys_]

You are right. Next time, I am planning a router dust collection system. The space where the router table is currently located is entirely ventilated, so I'm still putting it off. thank you!

[@TheBenibriliant]

👏🏻👏🏻👏🏻👍🏻👍🏻👍🏻✊🏻✊🏻✊🏻

[@Kynosys_]

Thanks for your praise!🫡🫡🫡

[@deemonmeister]

Wow... 0_0

[@Kynosys_]

Thanks for your interest!!!

[@PeterNetped]

[@3xantrik]

wouww. let me guess you are not married. huh?

[@Kynosys_]

@@3xantrik You have a point. Many people seem to think that I am married to a tool. In reality, surprisingly, I raised three children. I think some people will be surprised.

[@3xantrik]

@@Kynosys_ congrats, The way you give effort and time to your job makes me think that way, in a funny way of course. Even your drawers are motorised drove me think "this guy is not married and bury his time and ambition to his woodworking shop." :) I have some tools just lack of space to work with. unfortunately I live in a city center the buildings are stick to eachother and multiple floor makes woodworking almost impossible. hope one day I will get a decent space for it. I will be around here, you got a subs. Thanks.

[@Kynosys_]

@@3xantrik Thank you for your kind words. If you are someone like yourself with interest, passion, and a warm heart, you will have a wonderful workplace of your own. I sincerely hope that time comes sooner.

[@Sparky_Mark]

Keep up the videos man, you’re an inspiration for my channel. 🥲

[@Kynosys_]

Thank you for your kind words. I will also enjoy your works a lot.

[@b2yes]

How to remove the wooden chips provided during drilling processes from the top panel？

[@Kynosys_]

The next video is about adding a new type of dust collection equipment. To blow out the wood chips, a long, single-shaped groove was made on the back. thank you!

[@crayonbleu844]

Bravo

[@morcla7011]

Abbassato lo spazio di ca 30 mmm , gia piccolo, del piano lavoro 👎👎👎

[@Kynosys_]

What you said is correct. However, some people say, "Having a child means my personal time will decrease." I'm very curious how you would respond. I have three children, but I get endless joy from them. I love all tools and get great joy from changing them. thank you!