KYOCERA TaskAlfa 3500i 4500i 5500i Paper Feed Roller replacement

[@oschulte67]

Thank you. With help of your video instrutions I managed to replace the rollers step by step. You saved my day!

[@MrRicoh]

Welcome !

[@PathologicalResearcher]

MP Tray of Taskalfa 3511i does not pull paper. What might be the issue? W've cleaned the roller and installed it back gotten a new one also but that didn't solve the issue

[@MrRicoh]

@PathologicalResearcher So now it's time to replace the paper pick-up clutch.

[@xenned1219]

Is this the same roller for casette 2?

[@MrRicoh]

@xenned1219 The same rollers must be installed in paper cassettes 1 and 2. Only the additional cassette 3 and 4 have completely different rollers

[@doncoleman4862]

Good video. I may have to do this to solve a print quality problem. Do you have any video's on how to remove spots the photoconductor?

[@MrRicoh]

Stains on the photoconductor are a symptom of a damaged component in the drum unit. Remove all parts as shown in the copier repair video and check if you find anything worn or damaged. Good luck. And don't forget to subscribe to my channel.

[@rg7846]

Just replace the whole drum.

[@mikidjuka5446]

kyocera 3550 Waste Toner is new but the printer display shows that it is full and needs to be replaced

[@MrRicoh]

You probably have a dirty waste toner sensor, so you need to vacuum it. 🔥🔥 KZbin SUPPORT: kzbin.info/door/OHtXTtGHj33pUm8Gf2FH3Ajoin

[@mikidjuka5446]

@@MrRicoh sorry where is that sensor. thanks

[@ftousou]

what did you do? did you use konica minolta tires to replace this part? i will need your wise, i think!

[@MrRicoh]

Hello. You're right, we checked if they fit Minolta rolls. It turned out that the rollers work well in the Kyocera machine. Surely you know how many rolls to Kyocera because we did a few years ago experiment and it turned out that the rolls from MINOLTA can withstand 100,000 copies. We used these rolls: www.copy-expert.pl/produkt.php?%20iden=16514

[@ftousou]

i will need something more private to contact with you i see a business opportunity maybe

[@alexandraparvu259]

I want buy one ta5500i! Where i found

[@MrRicoh]

5500 is an old copier, search for 5501 or 5502

[@alexandraparvu259]

@@MrRicoh yes but where found it 5501i

[@MrRicoh]

There are several wholesalers on my market in Poland that offer these copiers, but I do not know the situation in the market of copiers.

[@mikidjuka5446]

will not pull paper from cassette 1 kyocera 3550, how to solve the problem, thanks

[@MrRicoh]

This is a very common glitch, the cartridge is broken at the side and stuck in the guide. You have to somehow get the cassette out and install a new one, because it is broken. Look for this: copy-expert.com/pl/p/KASETA-KYOCERA-TaskAlfa-3050ci-3500i-4500i-2K993010-302K993010-CT-8705/4794

[@mikidjuka5446]

@@MrRicoh I replaced the drawer and it won't again

[@mikidjuka5446]

I failed to solve the problem

[@mahershahbaz5267]

Bhai mujhy koi masla aa rha 5501i hai Mary pas agr koi hilp kar saky to

[@MrRicoh]

write what is your problem Is this about KYOCERA?

[@mahershahbaz5267]

@@MrRicoh Pure paper par chote chote dot a rahe hain

[@MrRicoh]

You have a problem with the charging electrode.

[@okanyasamuel6405]

what brings this code c7301 on 5500i

[@MrRicoh]

Hi, Code: 7301 Description: Toner hopper motor error When the toner hopper motor is driven, toner hopper sensor does not turn on within 200 ms. This error is detected 15 times successively. Causes: Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective toner hopper sensor. Defective toner hopper motor. Defective engine PWB. Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Toner hopper motor and front PWB (YC5) Front PWB (YC3) and engine PWB (YC7) Defective drive transmission system of motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any. Defective toner hopper sensor. Replace the toner hopper sensor. Defective toner hopper motor. Replace the toner hopper motor. Defective engine PWB. Replace the engine PWB and check for correct operation.

[@fazalhakim2098]

Jam4209 plz salution

[@MrRicoh]

See the User Manual. This is a normal paper jam.

[@mohammadsafeerkudazaisafee8436]

6230 code error

[@alexandraparvu259]

Ineresting

[@MrRicoh]

Thank You

[@OPKECTPAHT]

У нормальных производителей копиров замена роликов подачи бумаги это операция, которую производит пользователь. У Киосеры этим должен заниматься минимум кандидат технических наук! ))) --- Ordinary copier like Xerox: Measuring roller is operation for ordinary user. Kyocera: You should call the doctor of technical sciences... with experience.

[@MrRicoh]

Да, заменить ролики в Kyocera достаточно сложно. Я не знаю почему, но это так.