L-2 Part Analysis with Flow Analysis for molding feasibility

  Рет қаралды 461

EducationWood - Mechanical Engineering

EducationWood - Mechanical Engineering

Күн бұрын

In this Lecture we will learn about mold flow analysis for parts & few part analysis for mold feasibility like Draft , wall thickness, Gate Location.
in this lecture we will see flow analysis for plastic chair also.
Note: This Information is very important for MOLD Design Engineer.
Visit: www.educationwood.com
Timecode
00:12 - Part Analysis Points ?
04:35 - Part analysis in NX CAD
07:28 - Flow Analysis for fill

Пікірлер
L-3 Design for Manufacturing (DFM) Report for Plastic Part & MOLD Design
16:02
L-3 Design for Manufacturing (DFM) Report for Plastic Part & MOLD Design
EducationWood - Mechanical Engineering
Рет қаралды 549
GD&T and Tolerance Stack up Full course | How to apply datum's on part
11:31
GD&T and Tolerance Stack up Full course | How to apply datum's on part
Digital CAD Training
Рет қаралды 2,9 М.
У тебя новый заказ | 1 серия | Сериал «Эскорт. Новый вызов» | КОНКУРС
32:45
У тебя новый заказ | 1 серия | Сериал «Эскорт. Новый вызов» | КОНКУРС
DRAMA PIE
Рет қаралды 1,1 МЛН
Новый уровень твоей сосиски
00:33
Новый уровень твоей сосиски
Кушать Хочу
Рет қаралды 3,9 МЛН
Survival Skills: Amazing Dirty Water Purification Filter. #survival #camping #lifehacks
00:33
Survival Skills: Amazing Dirty Water Purification Filter. #survival #camping #lifehacks
Sergio Outdoors
Рет қаралды 66 МЛН
Сестра не поделила надувной матрас с братом..🤦‍♂️🪡⚓️
00:34
Сестра не поделила надувной матрас с братом..🤦‍♂️🪡⚓️
Connoisseur BLIND420
Рет қаралды 3,5 МЛН
MOLD FLOW ANALYSIS IN HINDI 🔥 | Autodesk Mold Flow analysis in Automobile Plastic Part | CIM Design
24:55
MOLD FLOW ANALYSIS IN HINDI 🔥 | Autodesk Mold Flow analysis in Automobile Plastic Part | CIM Design
CIM Design Solution
Рет қаралды 3,2 М.
1st angle और 3rd angle ही क्यों होता है 🤔🤔 2nd angle और 4th angle क्यों नही होता है?
13:57
1st angle और 3rd angle ही क्यों होता है 🤔🤔 2nd angle और 4th angle क्यों नही होता है?
Isometric Champ
Рет қаралды 7 М.
MOLD FLOW ANALYSIS - PLASTIC INJECTION MOULD DESIGN #moldex3d #MOULDFLOWANALYSIS
27:09
MOLD FLOW ANALYSIS - PLASTIC INJECTION MOULD DESIGN #moldex3d #MOULDFLOWANALYSIS
CIM Design Solution
Рет қаралды 7 М.
EXPERT MOLD SETTING INJECTION MOLDING MACHINE
10:50
EXPERT MOLD SETTING INJECTION MOLDING MACHINE
PLASTOTECH
Рет қаралды 24 М.
L-5 Choosing Best Gate Locations in Mold by Flow-Analysis
11:09
L-5 Choosing Best Gate Locations in Mold by Flow-Analysis
EducationWood - Mechanical Engineering
Рет қаралды 269
GD&T for beginners | Step by step approach for GD&T for mechanical drawings
17:57
GD&T for beginners | Step by step approach for GD&T for mechanical drawings
CADx
Рет қаралды 361 М.
HOW TO SET MOLD PROPERLY IN INJECTION MOLDING MACHINE BY BALRAJ SIR
8:24
HOW TO SET MOLD PROPERLY IN INJECTION MOLDING MACHINE BY BALRAJ SIR
PLASTOTECH
Рет қаралды 75 М.
#cnc #nx #cadcam #unigraphics #cncprogramming Simesns NX 11 cam Tutorial
13:48
#cnc #nx #cadcam #unigraphics #cncprogramming Simesns NX 11 cam Tutorial
Dixit Knowledge Academy
Рет қаралды 15 М.
jhumki gold designs in matrix rhino | 3d modeling | jewelry cad design tutorial | class 19 | 3d cad
11:24
jhumki gold designs in matrix rhino | 3d modeling | jewelry cad design tutorial | class 19 | 3d cad
Abu-Bakar 3d Jewellery Design
Рет қаралды 41 М.
У тебя новый заказ | 1 серия | Сериал «Эскорт. Новый вызов» | КОНКУРС
32:45
У тебя новый заказ | 1 серия | Сериал «Эскорт. Новый вызов» | КОНКУРС
DRAMA PIE
Рет қаралды 1,1 МЛН